Lrflc2706s /00 Parts

This door gasket assembly seals the refrigerator door to help keep cold air in and reduce energy loss. It replaces a worn or damaged seal to improve cooling performance and reduce moisture buildup around the door. What it does:

• Creates an airtight seal around the refrigerator door to maintain proper internal temperature
• Helps prevent warm spots, condensation, and frost buildup caused by a damaged seal
• Improves energy efficiency by minimizing cold-air loss
• Reduces the chance of food spoilage related to poor door sealing

• Disconnect power to the appliance and remove food from the door area before beginning work.
• Inspect the door frame for damage or debris and clean the surface to ensure a proper seal.
• Replacing the gasket may require warming or flexing the seal for proper fit and aligning any retaining clips or channels.

This rail guide assembly restores smooth, stable sliding of a refrigerator/freezer drawer or shelf rail so bins and drawers open and close properly. Replaces a worn or broken guide to reduce sticking and misalignment. What it does:

• Guides and supports the drawer or shelf along the cabinet rail for consistent movement
• Prevents binding, sagging, or uneven travel that can cause drawers to stick or drop
• Reduces noise from worn or damaged rail components
• Helps restore proper drawer alignment and load-bearing support

• Disconnect power to the appliance before starting work when accessing interior components
• Removal typically requires removing the drawer or shelf to access mounting points; have basic hand tools ready
• Inspect mating rails and fasteners for damage and replace if necessary for proper fit
• Test drawer operation after installation; do not overload drawer beyond manufacturer limits

This center hinge assembly replaces the middle hinge that supports and guides the refrigerator center door, restoring smooth door alignment and secure closing. Designed to fit the original hinge location and mounting points for a factory-style repair. What it does:

• Supports the center refrigerator door and helps maintain proper door alignment.
• Provides the pivot and stop points the door uses to open and close smoothly.
• Helps eliminate sagging, uneven gaps, or doors that don't latch reliably.
• Restores correct door movement when the original hinge is worn, bent, or damaged.

• Designed for direct replacement; match part to your appliance and mount at the center hinge location.
• Use appropriate hand tools and follow manufacturer torque recommendations for hinge fasteners.
• Remove power and empty doors of heavy contents before starting to reduce strain and risk of tipping.
• If door alignment issues persist after replacement, check adjacent hinges and door gaskets for wear.

This upper hinge assembly secures and pivots the refrigerator door, restoring proper door support and alignment so the door opens and closes smoothly. Ideal for replacing worn or damaged top hinge hardware. What it does:

• Supports the top of the refrigerator door and provides the pivot point for smooth opening and closing
• Restores proper door alignment to reduce gaps and improve sealing
• Replaces worn or bent hinge parts that can cause door sag or uneven closing
• Helps eliminate squeaks and binding at the top hinge

• Disconnect power to the appliance and empty or secure door contents before starting
• Remove door trim or screws as needed to access the hinge; keep track of fasteners
• Reuse existing mounting hardware only if undamaged; replacement fasteners may be required
• After installation, check door alignment and adjust as necessary for an even seal

This is a replacement wash tub basket that holds laundry during the wash and spin cycles, helping water circulate through clothes for effective cleaning. It restores proper load containment and helps prevent clothes from snagging. What it does:

• Holds and contains laundry inside the wash tub during wash and spin cycles
• Allows water and detergent to flow through clothing for cleaning and rinsing
• Prevents garments from contacting the outer drum or pump area
• Can reduce rubbing or snagging caused by a damaged or bent basket
• Helps maintain proper load balance when installed correctly

• Disconnect power and water supply before starting any repair
• Follow the washer's service manual for disassembly and reassembly steps
• Requires basic hand tools and lifting assistance; handle carefully to avoid damage
• Inspect bearings, seals, and suspension components while replacing the basket

This decorative cap is a snap-on trim piece that restores the finished look of the refrigerator door by covering exposed screws or hinge hardware. It replaces missing or damaged caps to improve appearance and prevent dirt buildup. What it does:

• Covers exposed screws, hinge tops, or trim openings for a clean, factory-finish look
• Protects fasteners from dust and grime that can collect around door edges
• Helps hide cosmetic damage from chips or cracks in the door trim
• Commonly replaced when the cap is cracked, broken, or missing

• Typically snaps into place—remove old cap by prying gently with a plastic trim tool or flat screwdriver covered with tape
• Align and press the cap firmly until it clicks into position
• No electrical disconnection usually required, but unplug appliance if working near electrical components or interior lights
• Wear gloves to protect hands from sharp edges during removal/installation

A small trim cap that covers and protects an exposed fastener or access opening, restoring the appliance's finished appearance and helping keep dirt and moisture out of the opening. What it does:

• Covers exposed screw heads or access holes to improve appearance
• Helps prevent dirt and moisture from entering openings around fasteners
• Restores a flush, finished surface after repair or panel removal
• Reduces the chance of snagging or accidental contact with recessed hardware

• One cap cover

• Disconnect power to the appliance before starting any repair
• Press into place over the fastener or opening until fully seated; no special tools usually required
• Avoid forcing or prying to prevent breakage of the cap or surrounding trim
• Replace any damaged surrounding trim or retainers to ensure a secure fit

This connector rail provides the electrical connection support used on the appliance's wiring harness, helping restore secure, stable connections for reliable operation. Designed as a direct replacement part to repair damaged or worn connector rails. What it does:

• Secures and routes wiring to maintain proper electrical contact
• Replaces cracked, broken, or loose connector rail assemblies
• Helps resolve intermittent power or signal loss caused by poor connections
• Restores OEM-style mounting and alignment for the harness

• Disconnect power to the appliance before beginning any repair to avoid shock or injury
• Inspect surrounding wiring and connectors for damage; replace any burnt or frayed wires
• Use basic hand tools; avoid forcing clips or fasteners to prevent breakage