Lrfvs3006 Parts

The Gasket Assembly Door is an OEM part for LG refrigerators. This gasket forms a seal around the refrigerator door, preventing warm air from entering and cool air from escaping, thus maintaining optimal temperature inside the refrigerator.

Causes of a bad gasket assembly can include wear and tear over time, damage from frequent opening and closing of the door, or degradation from exposure to various elements. A compromised gasket can lead to inefficiency in the refrigerator's cooling performance.

Symptoms of a bad gasket assembly include:

• Warm air entering the refrigerator
• Increased energy consumption
• Frost buildup inside the refrigerator
• The door not sealing properly or being difficult to close

This OEM LG part is also compatible with Sears/Kenmore models.

The Door Gasket Assembly is an OEM replacement part for LG refrigerators. This part seals the door and maintains a thermal barrier. Proper compression provides energy efficiency.

Causes of a faulty gasket assembly may involve deterioration as adhesive softens from repeated compression. Mineral deposits accumulated over extended use could also harden material reducing flexibility.

Symptoms of a problematic gasket include:

• Cool air felt leaking from the door
• Moisture visible on seal interface areas
• Temperature fluctuations

This part is also compatible with some Kenmore refrigerator models.

The Water Valve Assembly is an OEM part for LG refrigerators. This assembly controls the supply of water to areas within the refrigerator including the icemaker and water dispenser.

Causes of failure can be mineral buildup over time restricting flow, or damage to solenoid valves and electronic components regulating water pressure and distribution.

Symptoms of a bad water valve assembly include:

• Dripping or flooding from the water line connections
• Inability to dispense water or make ice
• Water levels that fluctuate erratically

This OEM LG part is also compatible with some Kenmore models.

This does include the Ice maker.

The Ice Dispenser Assembly is an OEM part for LG refrigerators. It incorporates the components responsible for making and dispensing cubed ice. 

Causes of a bad dispenser can include worn gears or drive wheels that no longer advance ice consistently. Clogs or mineral buildup from hard water sediments over time also reduce effectiveness.

Symptoms of a dysfunctional dispenser assembly include:

• Ice cubes dispensing poorly or jamming within the chute
• Grinding or other unusual noises during dispensing
• Dispenser knob or lever functioning intermittently
• Inability to selectively dispense ice or water

This LG part is also compatible with some Kenmore models.

The Air Cleaner Filter Assembly is an OEM component for LG sidebar refrigerators. Containing a pre-filter and deodorizing carbon filter, this assembly removes dust, pollen, and odors from air circulated within the refrigerator interior.   

Causes of needing a replacement include wear from regular saturation of the carbon filter over time as it absorbs odors and extends the life of the appliance.

Symptoms requiring replacement are:

• Odors becoming noticeable inside the refrigerator   
• Accumulation of dust visible over shelves and drawers
• Poor air circulation with limited debris removal 

This OEM LG part is also compatible with some Kenmore models

The Fan Grille Assembly is an OEM part specifically designed for LG refrigerator fan components. It houses the small circulating fan that helps regulate airflow and temperatures within the fridge and freezer compartments.

Causes of failure include normal wear over time of plastic parts, mineral deposits clogging mesh surfaces, or cracks from appliance shipping/handling.

Symptoms of an inadequate fan grille include: 

• Fluctuating temperatures requiring frequent adjustment 
• Foggy freezer glass from warm air infiltration
• Faster ice buildup or frost accumulation
• Reduced shelf life of meats and other perishables

 This OEM part also fits select Sears/Kenmore models.

This water filter assembly replaces the refrigerator's water filtration module to help restore clear-tasting water and steady flow. Fits models that use the AGF80300705 assembly and installs at the refrigerator water inlet. What it does:

• Filters sediment and common taste/odor contaminants to improve drinking water quality
• Restores reduced water flow caused by a clogged or failing filter module
• Helps reduce visible particulates and cloudiness in dispensed water
• Prevents unfiltered water from reaching the dispenser/ice maker when installed

• Turn off refrigerator water supply before replacing the assembly to avoid leaks
• Hand-tighten connections; avoid overtightening fittings to prevent damage
• Run and discard the manufacturer-recommended initial volume of water after install to flush the system

The MOTOR ASSEMBLY is an OEM component specifically designed for LG refrigerators. It is an electric motor that controls air circulation throughout the fridge to maintain optimum cooling. Proper air circulation is crucial for keeping food fresh while removing moisture to prevent frost buildup.

Causes of a bad motor assembly can include wear and tear over time, damages from electrical issues like power surges, or potential mechanical failures within the motor itself.  

Symptoms of a bad motor assembly include:

• Inconsistent temperatures inside the fridge 
• Excessive frost or ice buildup
• Strange noises emanating from the appliance
• Inability to achieve proper cooling

Replace yours today with this genuine OEM LG part to ensure reliable operation and consistent cooling performance. This OEM LG part is also compatible with Sears/Kenmore.

This replacement gasket seals the Home Bar (door-in-door) access panel on your refrigerator. A fresh, flexible seal stops warm-air leaks that cause condensation, frost, and temperature fluctuations, helping the unit run efficiently and keep food cold.

• Forms an airtight seal around the Home Bar/door-in-door panel
• Helps maintain proper interior temperature and humidity
• Common symptoms: visible gaps, torn or warped gasket, condensation or frost near the panel, door not closing flush
• Restores reliable closing and reduces unwanted airflow

• Disconnect power before servicing
• Open the Home Bar panel, pull the old gasket from the channel, then align and press the new gasket fully into the groove—seat corners first
• Warm the gasket (hair dryer on low or soak in warm water) to relax folds; do not overheat
• Close and check for an even seal; adjust by massaging the gasket into place as needed

The Compressor is an OEM component specifically designed for LG refrigerators. Located inside the refrigerator compartment, the compressor pressurizes and circulates refrigerant through the cooling system. Through precisely timed operation, the compressor maintains optimal freshness.

Symptoms of a bad compressor include:  

• Elevated interior temperatures failing to efficiently chill
• Loud buzzing or vibrating noises coming from inside the walls  
• Frost buildup indicating ineffective cooling cycles
• Complete cooling system failure leaving foods unpreserved

Causes involve refrigerant leaks, blocked airflow to the compressor, or simply wear over tens of thousands of hours of use breaking down moving components.

This OEM LG part is also compatible with some refrigerator models from Kenmore and Sears. Replace to restore reliable, long-term temperature control keeping contents at peak freshness.

The Auger Motor is an OEM part for LG refrigerators. It is responsible for dispensing ice from the icemaker into the ice bucket. 

Symptoms of a bad auger motor include:

• Slow or incomplete ice filling of the ice bucket
• Ice clumping or jamming in the auger assembly 
• Grinding or rubbing noises coming from the icemaker region
• The icemaker not producing any ice at all

Causes of a bad auger motor can be wear and tear over time, freezing or ice buildup preventing proper operation, or failure of internal motor components. 

This OEM LG part is also compatible with select Sears/Kenmore models. 

This tray assembly replaces a damaged or worn refrigerator drawer tray to restore secure storage and smooth drawer operation. It provides a durable support surface for food storage and helps keep drawer contents organized and contained. What it does

• Supports and stabilizes the refrigerator drawer, preventing sagging or uneven movement
• Provides a flat, easy-to-clean surface that contains spills and helps protect interior components
• Restores proper drawer alignment and smooth sliding when original tray is cracked or broken
• Commonly replaced for visible cracks, warping, or when the drawer no longer sits or slides correctly

• High-level replacement: remove drawer, unclip or unscrew old tray, and install the new tray following OEM guidance
• Use basic hand tools; avoid forcing parts to prevent damage to surrounding components
• Disconnect power only if removal requires accessing electrical components; otherwise, work with the unit powered off for safety

Replacement door basket that restores convenient storage on the appliance door, keeping bottles and small items secure and accessible. Replaces damaged or missing door bins to help keep your appliance door organized and usable. What it does:

• Provides a secure shelf on the appliance door for bottles, condiments and small containers.
• Replaces cracked, chipped or broken door bins that no longer hold items safely.
• Restores lost or reduced door storage capacity for easier organization.
• Helps prevent items from falling out of the door during normal use.

• Disconnect power (unplug or switch off) and remove all items from the door before starting.
• Most installations are hand-operated: lift or tilt the old bin out of the door track, then seat the replacement into the same track—do not force.
• Inspect mounting clips or supports during replacement; damaged clips must be replaced separately.

This Tray Cover Assembly replaces a damaged or missing outer cover to protect and contain the tray area, restoring proper fit and helping prevent spills or debris buildup. It's a direct-fit replacement designed for easy swap-in. What it does:

• Covers and protects the tray area to keep contents contained and reduce spills
• Restores proper alignment and sealing of the tray opening
• Replaces cracked, warped, or broken covers that cause leaks or poor fit
• Helps maintain appliance appearance and hygiene by covering exposed tray parts

• One tray cover assembly as shown

• Disconnect power (and water if applicable) before beginning any repair
• Handle part carefully to avoid scratching or cracking plastic
• Align tabs and snap or fasten in place; verify clips engage fully
• Test fit and basic operation before reassembling remaining panels

This customized screw secures internal or external appliance components to restore proper fit and reduce movement. Use it to replace missing or damaged fasteners so panels and assemblies stay firmly attached during normal operation. What it does:

• Fastens panels, brackets, or small assemblies to maintain structural stability
• Prevents rattling, vibration noise, or loose trim caused by missing screws
• Restores correct alignment where a stripped or damaged screw allowed movement
• Works as a direct replacement for the matching screw specified for the repair

• One screw

• Disconnect power and water supply before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten to prevent thread damage
• Keep small parts away from children and retain any removed hardware for reuse if needed

Color: Dark Stainless