Lrfvs3006 Parts

This vegetable tray assembly replaces a damaged or missing crisper drawer insert to keep fresh produce organized and contained in the refrigerator. Durable molded plastic fits into the crisper compartment for everyday use. What it does:

• Holds and contains fruits and vegetables so they stay organized and don't spill onto shelves
• Provides a removable surface for easy cleaning and produce access
• Restores proper drawer fit when the original tray is cracked, warped, or missing
• Helps maintain airflow around stored produce when installed correctly

• Disconnect power or unplug the refrigerator before inspecting or removing interior parts when possible.
• Slide out existing drawer and lift or unclip per the refrigerator's service instructions to remove old tray.
• Align new tray with drawer guides or rails and slide in until it seats fully; avoid forcing.
• Handle edges carefully to avoid damage; clean with mild detergent and water — do not use abrasive cleaners.

This lever return spring restores proper tension to the lever assembly so the control or latch returns smoothly. A direct-fit replacement designed to restore normal lever movement and function. What it does:

• Provides return tension for the lever to ensure reliable latch or control movement
• Helps stop the lever from sticking or remaining engaged after use
• Restores smooth, consistent operation when the original spring is worn or broken
• Commonly replaced when lever movement feels loose or fails to return

• One spring lever

• Disconnect power (or unplug) and follow appliance safety procedures before servicing
• Access may require removing panels or the control/door assembly; keep fasteners organized
• Inspect mating lever and pins for wear; replace damaged components to prevent repeat failure

This upper hinge assembly secures and guides the appliance door at the top hinge point, restoring proper door alignment and smooth opening. Replaces a worn or damaged upper hinge to reduce door sag, binding, or uneven sealing. What it does:

• Supports the top of the door and provides the pivot point for opening and closing
• Restores correct door alignment to improve gasket sealing and energy efficiency
• Eliminates rubbing, binding, or uneven movement caused by a damaged hinge
• Reduces noise from a loose or worn hinge

• Unplug the appliance and empty or support the door before starting work
• Use proper hand tools and take care not to tighten fasteners excessively
• Keep track of hardware; replace only listed items unless additional parts are required

This lever-style button is the user-facing push control that engages a mechanism when pressed, restoring proper control input and tactile feedback. It's a direct-replacement component used where a worn or broken button prevents normal operation. What it does:

• Provides a firm, responsive surface for pressing controls or releasing a latch
• Restores proper mechanical engagement when original button is cracked, loose, or missing
• Helps eliminate intermittent or non-responsive button presses caused by damaged button parts
• Matches OEM fit and function to maintain original user interface feel

• One lever-style push button

• High-level replacement; most installations require removing the control panel or trim to access the button
• Power off and unplug the appliance before beginning work to avoid shock or injury
• Handle small plastic parts carefully to avoid damage; test button function before reassembling all panels

This decor cap is a small exterior trim piece that restores the finished look of the refrigerator door and covers fasteners or exposed edges. It helps maintain the appliance's appearance and protects underlying hardware from dust. What it does:

• Covers and protects exposed screws or trim edges on the refrigerator door
• Restores a clean, finished appearance to damaged or missing trim areas
• Helps prevent dirt and moisture from contacting underlying hardware
• Commonly used when replacing door trim or after hinge/fastener service

• One decor cap

• High-level replacement only; typically snaps or slides into place over the trim area
• Power off and empty nearby shelves if removing heavy items to access the cap safely
• Use non-marring tools to pry gently if needed to avoid scratching surrounding surfaces
• Keep hardware organized and hand-tighten to avoid overtightening

This is a replacement screw used to secure appliance panels, trim, and small components so damaged or missing fasteners don't leave parts loose. It restores proper fit and reduces rattling and movement. What it does:

• Secures panels, trim pieces, or internal components to restore proper fit
• Stops panels from shifting or vibrating during use
• Replaces stripped, corroded, or missing screws that prevent proper assembly
• Helps eliminate rattling noises caused by loose fasteners

• One replacement screw as pictured

• Unplug the appliance or shut off power before installing
• Use the correct screwdriver or bit to avoid stripping the head
• Hand-start the screw, then snug—do not overtighten to avoid cracking plastic parts
• If screw threads are damaged, replace with the exact OEM screw to ensure proper fit

This duct cap assembly seals and finishes the dryer exhaust opening, directing airflow out of the appliance while protecting the duct connection from damage. It restores a secure exhaust path and helps maintain proper venting performance. What it does:

• Covers and secures the dryer exhaust/duct outlet to provide a stable connection point for the vent hose.
• Helps prevent air leaks at the duct connection that can reduce drying efficiency.
• Replaces cracked, broken, or missing outlet caps that cause rattling or poor airflow.
• Supports proper exhaust routing to reduce lint buildup at the connection point.

• One duct cap assembly.

• Disconnect the appliance from power (and gas if applicable) before accessing the duct area.
• Move the appliance away from the wall to reach the rear exhaust; remove the old cap and any sealing tape or clamps.
• Reattach the duct hose and secure with the original clamp or a replacement clamp rated for dryer vents.
• After installation, run a short cycle to verify a tight fit and proper exhaust flow; inspect for leaks or unusual vibration.

This rear machinery cover protects the washer's motor and drive components from debris and accidental contact, keeping internal parts enclosed for safer, more reliable operation. What it does:

• Covers and shields the motor, drive shaft and associated machinery at the back of the tub
• Helps keep lint, dust and small objects away from moving parts
• Reduces risk of accidental contact when accessing the rear cabinet
• Can reduce exposure of electrical connections to incidental moisture or debris

• One rear machinery cover assembly

• Disconnect power to the appliance before beginning any service
• Remove the cabinet or rear access panel as required to reach mounting locations
• Handle carefully to avoid bending tabs; secure with factory screws or clips

This deodorizer assembly helps reduce food odors inside the fresh-food compartment by neutralizing smells at the source for a fresher-smelling refrigerator interior. Designed to fit into the factory deodorizer housing and integrate with the fridge's air system. What it does

• Contains the deodorizing element that helps neutralize common food odors in the refrigerator compartment
• Works with the appliance's air circulation to continuously treat internal air and reduce lingering smells
• Commonly replaced when odors persist despite cleaning or after the deodorizer element has reached end of life
• Matches the original shape and connectors to restore proper fit and function

• Disconnect power to the refrigerator before attempting removal or installation to avoid electrical shock
• Access typically requires removing the deodorizer cover inside the fresh-food compartment or freezer—handle panels and clips carefully
• Avoid exposing the deodorizer element to water; replace the entire assembly if the element is saturated or damaged
• Reassemble panels and restore power, then allow the refrigerator to run for a few hours before evaluating odor reduction