Lrfvs3006 Parts

This door assembly replaces the home-bar/mini-refrigerator door to restore seal, appearance, and access to the compartment. It's a complete outer door shell prepped for hinge and handle mounting to simplify replacement. What it does

• Replaces a damaged, dented, or warped home-bar door to help restore proper closing and appearance.
• Restores correct hinge alignment so the door opens and closes smoothly.
• Helps re-establish the door surface needed for gasket sealing.
• Addresses symptoms like visible door damage, poor closing/alignment, or water/air leaks at the door area.

• One replacement home-bar door assembly (outer door shell).

• Requires basic hand tools; confirm hinge type and mounting screws on your model before starting.
• Remove power or disconnect the appliance per manufacturer safety recommendations before servicing.
• Handle, hinge pins, or gasket may need transfer from the old door or be purchased separately.

This duct assembly routes exhaust air from the appliance to the home vent, helping maintain proper airflow and venting. Designed to fit multi-position installations for flexible connection and reliable operation. What it does:

• Channels exhaust air from the appliance to the external vent to support proper ventilation.
• Allows multi-position/adjustable installation to accommodate different vent layouts.
• Helps reduce heat and moisture buildup in and around the appliance.
• Resolves performance issues caused by restricted or disconnected ductwork.

• Install per the appliance service manual; ensure all connections are secure and sealed to prevent air leaks.
• Disconnect power before servicing to avoid electrical shock.
• Check that the duct routing meets local building codes and that the external vent is clear.

This center hinge assembly replaces the middle hinge that supports and guides the refrigerator center door, restoring smooth door alignment and secure closing. Designed to fit the original hinge location and mounting points for a factory-style repair. What it does:

• Supports the center refrigerator door and helps maintain proper door alignment.
• Provides the pivot and stop points the door uses to open and close smoothly.
• Helps eliminate sagging, uneven gaps, or doors that don't latch reliably.
• Restores correct door movement when the original hinge is worn, bent, or damaged.

• Designed for direct replacement; match part to your appliance and mount at the center hinge location.
• Use appropriate hand tools and follow manufacturer torque recommendations for hinge fasteners.
• Remove power and empty doors of heavy contents before starting to reduce strain and risk of tipping.
• If door alignment issues persist after replacement, check adjacent hinges and door gaskets for wear.

This is a replacement wash tub basket that holds laundry during the wash and spin cycles, helping water circulate through clothes for effective cleaning. It restores proper load containment and helps prevent clothes from snagging. What it does:

• Holds and contains laundry inside the wash tub during wash and spin cycles
• Allows water and detergent to flow through clothing for cleaning and rinsing
• Prevents garments from contacting the outer drum or pump area
• Can reduce rubbing or snagging caused by a damaged or bent basket
• Helps maintain proper load balance when installed correctly

• Disconnect power and water supply before starting any repair
• Follow the washer's service manual for disassembly and reassembly steps
• Requires basic hand tools and lifting assistance; handle carefully to avoid damage
• Inspect bearings, seals, and suspension components while replacing the basket

This decorative cap is a snap-on trim piece that restores the finished look of the refrigerator door by covering exposed screws or hinge hardware. It replaces missing or damaged caps to improve appearance and prevent dirt buildup. What it does:

• Covers exposed screws, hinge tops, or trim openings for a clean, factory-finish look
• Protects fasteners from dust and grime that can collect around door edges
• Helps hide cosmetic damage from chips or cracks in the door trim
• Commonly replaced when the cap is cracked, broken, or missing

• Typically snaps into place—remove old cap by prying gently with a plastic trim tool or flat screwdriver covered with tape
• Align and press the cap firmly until it clicks into position
• No electrical disconnection usually required, but unplug appliance if working near electrical components or interior lights
• Wear gloves to protect hands from sharp edges during removal/installation

This lamp cover is the replacement light lens that protects and diffuses the appliance's internal lamp, restoring even illumination and shielding the bulb from moisture and debris. It's a direct-fit exterior lens for the lamp assembly. What it does:

• Protects the interior lamp from dust, moisture and impact to help prevent bulb damage
• Diffuses and directs light for even illumination inside the compartment
• Restores a cracked, yellowed or missing lens to improve visibility
• Helps maintain the lamp assembly's proper fit and alignment

• One lamp cover / light lens

• Power off and unplug the appliance before beginning any service
• Remove lamp bulb per manufacturer instructions before replacing the cover to avoid damage
• Use proper tools and handle the lens gently to avoid scratching or cracking
• If mounting clips or screws are worn or missing, replace them separately

A decorative door trim handle that restores the look and grip of your appliance door. Replaces scratched, cracked or worn trim so the door looks finished and is easier to open. What it does

• Provides the exterior trim/handle piece used to open and close the appliance door.
• Restores a secure grip when original trim is cracked, broken or loose.
• Improves appearance by replacing scratched or dented decorative trim.
• Works with the factory mounting points for a direct-fit replacement.

• One decor handle (trim) piece as shown.

• Disconnect power (and water supply for refrigerators with water/ice) before starting.
• Remove any trim covers or screws holding the old handle; handle may snap or screw off depending on model.
• Align replacement trim to factory mounting points and secure with original fasteners.