Lsfs213st Parts

This rail guide assembly supports and guides a refrigerator drawer along its slide track. Replacing a worn rail restores smooth, even movement and helps the drawer close properly without binding or coming off track.

• Guides the drawer along the slide path for smooth opening and closing
• Maintains alignment to keep the drawer level and stable
• Common symptoms of failure: sticking, rough or noisy travel, tilting, coming off track, or not closing fully
• Damage or wear to the rail can prevent proper drawer operation

• Disconnect power and remove drawer contents before servicing
• Pull out and remove the drawer/basket to access the rail
• Unfasten and remove the old rail; retain and transfer any mounting hardware or clips if needed
• Secure the new rail and test drawer travel for smooth, even operation

Restore the interior of your refrigerator with this T/V cover assembly. It covers the temperature-variable (T/V) section and helps direct airflow in the fresh food compartment, protecting components and maintaining a clean, finished appearance for consistent performance.

• Covers and protects the T/V section/duct inside the fresh food compartment
• Helps guide airflow to the T/V area as designed by the manufacturer
• Replaces cracked, warped, or missing panels to restore proper fit and function
• Common signs to replace: broken tabs, loose or rattling panel, uneven cooling around the T/V area

• Disconnect power before servicing
• Clear the shelf area and remove adjacent drawers or trim as needed
• Release retaining screws or clips and lift out the old cover carefully
• Seat the new cover evenly on its supports; ensure vents/slots align and the panel locks into place before restoring power

This water filter assembly replaces the refrigerator's water filtration module to help restore clear-tasting water and steady flow. Fits models that use the AGF80300705 assembly and installs at the refrigerator water inlet. What it does:

• Filters sediment and common taste/odor contaminants to improve drinking water quality
• Restores reduced water flow caused by a clogged or failing filter module
• Helps reduce visible particulates and cloudiness in dispensed water
• Prevents unfiltered water from reaching the dispenser/ice maker when installed

• Turn off refrigerator water supply before replacing the assembly to avoid leaks
• Hand-tighten connections; avoid overtightening fittings to prevent damage
• Run and discard the manufacturer-recommended initial volume of water after install to flush the system

This replacement gasket seals the Home Bar (door-in-door) access panel on your refrigerator. A fresh, flexible seal stops warm-air leaks that cause condensation, frost, and temperature fluctuations, helping the unit run efficiently and keep food cold.

• Forms an airtight seal around the Home Bar/door-in-door panel
• Helps maintain proper interior temperature and humidity
• Common symptoms: visible gaps, torn or warped gasket, condensation or frost near the panel, door not closing flush
• Restores reliable closing and reduces unwanted airflow

• Disconnect power before servicing
• Open the Home Bar panel, pull the old gasket from the channel, then align and press the new gasket fully into the groove—seat corners first
• Warm the gasket (hair dryer on low or soak in warm water) to relax folds; do not overheat
• Close and check for an even seal; adjust by massaging the gasket into place as needed

The motor bracket assembly secures the motor inside your appliance, keeping it aligned and stable. Replacing a damaged bracket helps reduce vibration-related noise and prevents the motor from shifting or rubbing during operation.

• Securely supports and positions the motor within its housing
• Maintains proper alignment and clearance to prevent rubbing or scraping
• Helps reduce vibration and rattling noises from a loose or broken mount
• Replaces cracked, warped, or broken brackets that allow the motor to move

• Disconnect power to the appliance before servicing; wear cut-resistant gloves.
• Remove the necessary cover/panel to access the motor area.
• Transfer the motor and any cushions/grommets and screws from the old bracket to the new one.
• Ensure moving parts rotate freely and wiring is secured before reassembly.

This drawer tray assembly is the platform that supports a refrigerator storage drawer and guides it along the slides. Replacing a cracked or damaged tray restores smooth operation, proper alignment, and dependable support for your food items.

• Supports the drawer bin and its contents inside the compartment
• Interfaces with the slide/rail system for smooth in-and-out travel
• Helps maintain proper alignment so the drawer opens and closes fully
• Common symptoms: cracked or broken tray, broken tabs, wobbling drawer, sticking/binding, or difficulty closing

• Disconnect power and empty the drawer before service
• Remove the drawer per your model's instructions; release tabs or screws securing the tray
• Position the new tray, ensuring tabs/rollers seat correctly; reinstall any fasteners
• Reinstall the drawer and check for smooth travel before reloading

An in-line union for appliance tubing, this tube connector joins two sections of plastic line to create a secure, leak-resistant connection in the water circuit, ideal for restoring flow after a repair, trim, or reroute. What it does:

• Connects two lengths of compatible plastic tubing to form a continuous run
• Helps maintain proper water delivery through the appliance's water system
• Can address leaks, drips, or loose/failed connections at a splice point
• Useful when replacing, shortening, or rerouting tubing during service

• 1 tube connector

• Disconnect power and shut off the water supply before servicing
• Cut tubing square; ensure ends are clean, round, and free of gouges
• Insert tubing fully into the connector until seated, then perform a gentle pull test
• Restore water and inspect all joints for leaks; use the connector size that matches your tubing's outer diameter

This center hinge assembly supports the refrigerator door at the mid-hinge position and allows smooth, reliable pivoting. Replacing a worn hinge restores proper alignment so the door closes and seals as designed.

• Provides the pivot point at the center hinge location
• Supports door weight to maintain alignment and clearance
• Helps ensure even gasket contact for an effective seal
• Common symptoms: door sagging or rubbing, squeaking at the hinge, difficulty closing, visible play or damage at the hinge pin

• Unplug the appliance and remove items from the door to reduce weight
• Support the door while removing the center hinge fasteners
• Note and transfer any spacers/washers in the same order and orientation
• After installation, align the door and verify the gasket seals evenly

This water tube routes drinking water from the refrigerator's supply to the dispenser/ice system, restoring proper water flow for dispensing and ice-making. Use when water flow is reduced, leaking, or the tube is cracked or clogged. What it does:

• Carries potable water between the internal components (valve, dispenser, ice maker) for dispensing and ice production
• Replaces cracked, split, or clogged tubing that causes leaks or poor water flow
• Helps stop visible leaks and restores consistent dispenser flow when tubing is the fault
• Compatible with systems that use a molded plastic water line rather than braided or metal tubing

• Turn off water supply and unplug the appliance before beginning work
• Drain residual water from the line and catch any spillage with a towel or small container
• Inspect fittings and seals; replace O-rings or clamps if damaged

This button assembly replaces worn or damaged push-button components on the control panel to restore reliable user input and normal front-panel operation without replacing the entire console. What it does:

• Replaces the control panel push-button mechanism that registers user presses.
• Fixes symptoms like unresponsive, sticking, intermittent, or missing buttons.
• Helps restore proper cycle selection and control inputs when buttons fail.
• Works with the existing control board and fascia to avoid full-console replacement.

• Disconnect power before working on the appliance to avoid shock—unplug or shut off the breaker.
• Access typically requires removing the console or control bezel; keep fasteners and small parts organized.
• Handle any ribbon cables or connectors carefully; avoid bending contacts.
• Test the assembly before final reassembly.

This guide assembly replaces the internal guide that helps align and support the TV panel and internal components, restoring proper fit and reducing rattles or misalignment. It's a straight swap for damaged or worn guides. What it does:

• Holds and aligns the display panel and internal modules to maintain correct spacing and fit
• Prevents panel movement that can cause rubbing, rattling, or uneven gaps
• Restores secure mounting after impact or wear that bent or broke the original guide
• Helps ensure proper chassis alignment for accurate screen placement and service access

• Disconnect power and remove the TV from its stand or wall before servicing
• Handle the display panel and internal cables carefully to avoid damage
• Use appropriate screwdrivers and keep fasteners organized for reassembly

Replacement door basket that restores convenient storage on the appliance door, keeping bottles and small items secure and accessible. Replaces damaged or missing door bins to help keep your appliance door organized and usable. What it does:

• Provides a secure shelf on the appliance door for bottles, condiments and small containers.
• Replaces cracked, chipped or broken door bins that no longer hold items safely.
• Restores lost or reduced door storage capacity for easier organization.
• Helps prevent items from falling out of the door during normal use.

• Disconnect power (unplug or switch off) and remove all items from the door before starting.
• Most installations are hand-operated: lift or tilt the old bin out of the door track, then seat the replacement into the same track—do not force.
• Inspect mounting clips or supports during replacement; damaged clips must be replaced separately.

This door basket is a direct-fit replacement refrigerator door bin that restores door storage for bottles, jars and other items. It keeps door contents secure and organized so you can use the full door storage again. What it does:

• Replaces a cracked, broken or missing door bin that no longer holds items securely
• Provides stable storage for bottles, condiments and small containers on the refrigerator door
• Restores proper door seal clearance by returning the original bin height and fit
• Helps stop items from falling out when the door is opened or closed

• One refrigerator door basket/bin

• Remove all contents from the old door bin before starting
• Most installations snap into place: align mounting tabs with door slots and press until it clicks
• If screws or clips are present, retain original fasteners and reinstall as needed
• For safety, handle glass/jar contents carefully and avoid forcing parts; unplug the appliance if you will be working inside sealed compartments

This replacement home bar case is the molded compartment that fits into the refrigerator door to hold the home-bar area. It restores proper storage and support for bottles and accessories behind the home-bar door. What it does

• Serves as the molded housing/shelf for the refrigerator's home-bar compartment.
• Supports bottles and small items stored behind the home-bar door.
• Helps align and secure the home-bar door and internal components.
• Cracked or damaged cases can cause items to shift, rattle, or fall from the home-bar area.

• One home bar case

• Disconnect power to the appliance before beginning any repair.
• Remove the refrigerator door panel or inner liner as required to access the home-bar case; keep fasteners organized.
• Handle the plastic housing carefully to avoid further cracking; use correct OEM screws and clips for reassembly.
• Test the home-bar door operation and inspect for proper fit before returning the refrigerator to service.

This rail holder is a small mounting bracket that secures a sliding rail or guide to the appliance, restoring smooth movement and proper alignment. It's a direct-fit replacement designed to replace worn or broken rail supports. What it does:

• Secures and supports a sliding rail or guide so drawers/doors move smoothly
• Prevents rail movement that can cause rubbing, sticking, or uneven travel
• Restores proper alignment when a damaged holder causes noisy or wobbly operation
• Helps maintain safe rail attachment to the cabinet or frame

• Disconnect power (or unplug) and move the appliance to a safe, stable position before starting
• Basic hand tools are typically required; save mounting hardware unless replacement is specified
• If mounting screws or clips are damaged, replace them to ensure a secure fit