Lsgl6335d/00 Parts

The Screw is an OEM component specifically designed for LG ranges. It plays an important mounting and fastening role by securely attaching internal components together.

The screws utilized within the range cabinet ensure sturdy construction and reliable mechanical cohesion. They allow for simple assembly and proper alignment of inner parts. 

Causes of bad screws can include wear and tear over time, or damage from overtightening leading to stripped threads or heads.

Symptoms of bad screws include:

• Loose, detached, or misaligned inner parts  
• Hardware that does not fit or interface as designed
• Unintended noises or movement during the operation

This OEM LG replacement part is also compatible with Sears/Kenmore and some GE ranges utilizing similar fasteners. Replacement ensures the range remains mechanically sound.
 

A Tap-Tite binding-head screw used to fasten appliance panels and components where a self-tapping metal thread is required. Replaces missing or damaged fasteners to restore secure assembly and reduce vibration or rattling. What it does:

• Creates its own mating thread in thin sheet metal for a secure hold without a nut.
• Holds panels, brackets, and trim in place to prevent looseness or movement.
• Commonly used where stripped, missing, or broken screws cause rattling, misalignment, or parts that won't stay attached.
• Compatible with standard screwdrivers or nut drivers sized to the binding-head.

• Disconnect power and unplug the appliance before working on it.
• Use the correct driver bit to avoid cam-out or head damage.
• Start straight and apply steady pressure; avoid overtightening to prevent stripping the formed threads.
• If the original hole is badly damaged, assess for repair or use of a larger fastener as needed.

This genuine control knob assembly replaces a worn, cracked, or non-responsive selector knob to restore precise control of settings. It snaps onto the control shaft for a secure fit and returns a tactile, reliable user interface. What it does:

• Replaces a damaged or stripped control knob so settings can be changed accurately
• Restores proper grip and tactile feedback for selecting cycles, temperatures, or speeds
• Prevents slipping or accidental changes caused by a loose or broken knob
• Helps eliminate failure to turn or intermittent selection caused by a broken knob

• Disconnect power to the appliance before starting any repair
• Typically installs by pulling off the old knob and pushing the new knob fully onto the control shaft until it seats
• If knob does not fit, verify shaft type and orientation; do not force to avoid shaft damage

This door handle mounting anchor creates the fixed attachment point on the appliance door or drawer. Replacing a worn or missing anchor restores a solid, wobble-free handle and a consistent feel when opening and closing.

• Provides the secure mounting point that the handle fastens to
• Helps keep the handle aligned and rigid during use
• Replace if the anchor is cracked, stripped, or missing
• Resolve a loose/wobbly handle, a handle that won't tighten, or misalignment after service

• Disconnect power; turn off the water supply
• Protect the door/drawer finish and support the handle during removal
• Remove the handle per your model's instructions and take out the damaged anchor
• Install the new anchor using the existing mounting location/hardware, seat the handle fully, then tighten set screws evenly without overtightening

The Common Nut is an OEM part for LG ranges. It secures the fan blade to the motor shaft. This nut maintains the fan's stability and preventing it from becoming dislodged during use.

Causes of a bad common nut can include loosening over time due to vibration, improper installation, or damage from impact or mishandling.

Symptoms of a bad common nut include:

• Excessive noise or vibration from the fan assembly
• The fan blade becoming loose or detached, causing poor air circulation
• Potential risk of the fan blade becoming a projectile if completely detached

This OEM LG part is also compatible with some Kenmore models.a

This insulator is the mica sheet that covers the microwave's waveguide opening. It shields the cavity from food splatter and moisture while allowing microwave energy to pass, helping prevent arcing and protecting internal components.

• Covers the waveguide port to keep grease and debris out
• Helps prevent sparking/arcing inside the cavity
• Restores safe, even microwave operation when the original is burned or stained
• Typical symptoms: visible burn marks or charring on the cover, arcing/sparking during use, unusual noises

• Unplug the appliance before service; high-voltage components can retain charge
• Remove the old cover by releasing mounting screw or tabs; clean residue from the area
• Do not bend or crack the new mica; install with the same orientation
• If trimming is required per service literature, follow the outline of the original cover only

This hardware washer helps distribute fastener load and maintain proper spacing in your LG appliance. Replacing a missing or worn washer restores secure mounting and alignment, reducing vibration and rattling from loose assemblies.

• Distributes the load of a screw or bolt and protects mating surfaces to maintain alignment
• Helps keep components secure and at the correct spacing
• A damaged or missing washer can lead to loosening, vibration, or rattling during operation
• Ensures correct hardware stack-up during reassembly after service

• Disconnect power and shut off water or gas before servicing
• Note the order and orientation of any washers/spacers; take a reference photo
• Use the correct driver or wrench and tighten snugly—do not overtighten
• Replace companion hardware if corroded, stripped, or damaged

The Broil Burner Orifice Holder Assembly is an OEM part for LG gas ranges. This assembly includes the burner located at the top of the range oven cavity used for powerful broiling functions. 

Symptoms of a bad broil burner assembly include:

• Inadequate or uneven broiling performance
• Diminished heating ability in the broil setting  
• Burner fails to ignite or light properly
• Burner makes sputtering or clicking noises

Causes of failure can include clogged or damaged orifices, worn-out gaskets or seals, or cracks in burner tubing that allow gas leakage.

Replace yours today with this genuine LG replacement part to restore optimal broiling performance. This OEM assembly is also compatible with the Kenmore Elite brand.

The Burner Assembly is an OEM component specifically designed for LG gas ranges equipped with sealed cooktop burners. This integral assembly contains the ignition electrode, valve stem, and cast burner head to conduct flame across grates.  

Symptoms of a bad burner assembly include:

• Inability to ignite or maintain consistent flames under cookware
• Yellow broken or excessive flame instead of steady blue  
• Clicking ignition sounds but no combustion takes place
• Deteriorated valve stems limiting gas flow regulation

Causes of failure involve clogged ports blocking gas dispersion, cracked burner bases no longer supplying sufficient air intake, or damaged ignition systems disabling piezo sparks over dozens of heating cycles.

Replace yours today with this genuine OEM LG assembly to restore optimal cooktop performance. Factory-sealed construction withstands daily use maintaining even heat across pans and preventing gas leaks. Compatible with GE, Frigidaire, and Kenmore sealed burner models as a direct unit replacement.

The Burner Head is an OEM part for LG gas ranges. It sits securely at the center of each gas burner unit, featuring precision-engineered ports that control the size and pattern of flames.

Causes of burner head failure can include warping or damage to ports from extended heat exposure. Mineral buildup also distorts optimized air and gas mixing over time.

Symptoms of a problematic burner head include:

• Irregular or unevenly distributed flame
• Spots of excessive heat or cold spots on cookware
• Inability to maintain consistent temperatures

This LG part is also compatible with some Kenmore models.
 

This outer door frame replaces a cracked, dented or worn door trim to restore the door's appearance and support for the door seal. It gives the door a solid, finished edge and helps maintain proper sealing. What it does

• Replaces damaged or warped outer door trim that can let moisture or air into the cabinet
• Restores proper alignment and mounting for the door gasket and inner door components
• Improves door appearance by covering dents, scratches or missing trim
• Helps reduce drafts or condensation caused by a damaged door edge

• One outer door frame

• Disconnect power and empty the door before starting; work on a stable surface
• Remove door hardware and inner trim panels as required to access the frame
• Handle glass and trim carefully to avoid scratching; use correct fasteners and torque evenly