Lsxs6366s/00 Parts

This water valve assembly controls water flow into the appliance, restoring proper fill and dispensing so your refrigerator can make ice and deliver water reliably. Designed as a direct replacement for the original OEM valve. What it does:

• Opens and closes to regulate incoming water for the ice maker and dispenser
• Helps stop leaks or no-water symptoms when the valve seals and solenoids are functioning
• Restores normal water flow when the valve solenoid or diaphragm has failed
• Works with the appliance's water supply and control signals to deliver measured fills

• Disconnect power and shut off the water supply before replacing the valve
• Handle connectors and tubing carefully; use proper tools to avoid damaging fittings
• Confirm water lines are clear and check for leaks after installation

This holder secures the dryer-related assembly in place to reduce movement and wear, helping maintain proper alignment and quieter operation. It's a simple replacement that restores part stability in the appliance. What it does:

• Secures a dryer assembly or component to the appliance frame to prevent shifting
• Helps reduce vibration and rubbing noises caused by a loose part
• Maintains correct alignment so related parts operate smoothly
• Used when the existing holder is cracked, broken, or missing

• Disconnect power before replacing any dryer components to avoid shock or injury
• Access location and removal steps vary by model; follow the appliance's service manual or exploded view
• Keep fasteners and adjacent parts organized for reassembly; replace any damaged clips or screws

This rear cabinet cover replaces a damaged or missing TV back panel to protect internal electronics and restore the set's finished appearance. It provides a secure mounting surface and helps keep dust and debris out of the chassis. What it does

• Shields internal circuit boards, power supply and connections from dust, impact and accidental contact
• Restores proper alignment and attachment points for the TV chassis and external connectors
• Eliminates rattles or loose fit caused by cracked or broken mounting tabs
• Helps maintain proper ventilation paths around internal components when installed correctly

• Unplug the TV and place on a soft, protected surface before starting; handle cover edges carefully to avoid cuts.
• Keep and reuse original screws and any attached hardware unless replacements are specified.
• Align mounting tabs and connectors before tightening fasteners; do not force or overtighten to avoid breaking plastic tabs.
• If internal access is required, refer to the TV's service manual; do not touch exposed boards while the set is powered.

This DC drive motor powers the washer drum, restoring agitation and spin so loads clean and drain properly. It replaces a failed drive motor to help appliances resume normal wash and spin cycles. What it does:

• Turns the drum for agitation and high-speed spin to remove water from clothes
• Replaces motors that hum, do not spin, or have irregular rotation
• Can stop or reduce vibration and noise caused by a failing motor
• Helps resolve wash cycles that stall or fail to advance due to motor faults

• Disconnect power and water before starting any repair
• Remove outer panels and drum access components as required for your model
• Handle the motor and rotor carefully; support the assembly to avoid damage
• Verify electrical connections and mount alignment before restoring power; test with no load

This door foam assembly restores the insulating core inside a refrigerator door to help maintain consistent interior temperatures and reduce cold spots. Replacing damaged or waterlogged door foam improves efficiency and reduces condensation risk. What it does:

• Replaces the internal insulation foam inside the refrigerator door to restore thermal performance.
• Helps reduce door cold spots and uneven cooling caused by damaged or compressed foam.
• Can lessen interior condensation and frost build-up associated with compromised door insulation.
• Reduces transfer of exterior temperature to the cabinet, supporting overall cooling efficiency.

• Disconnect power to the appliance before starting any repair and remove food from the door area.
• Door panel removal is typically required; keep screws and clips organized for reassembly.
• Take care not to damage the door liner or gasket when removing/installing the foam; use appropriate trim tools.

This upper drawer tray assembly supports and contains items in the refrigerator's top drawer, restoring a stable surface and helping prevent spills or sagging. Designed to replace a cracked, warped, or damaged upper drawer tray. What it does:

• Provides a flat, stable base for the upper refrigerator drawer so items sit level
• Keeps small items contained to reduce shifting and spills inside the drawer
• Restores proper drawer alignment and smooth sliding when a broken tray causes binding
• Helps prevent moisture pooling when the original tray is cracked or distorted

• Unplug the refrigerator or disconnect power before servicing to avoid electrical hazard
• Remove food and slide out the drawer fully to access and replace the tray
• Handle the replacement part carefully to avoid scratching or chipping; reassemble in reverse order
• If you encounter resistance or misalignment after installation, double-check tray seating and drawer rails

This door foam assembly cushions and insulates the home-bar compartment door to help maintain cold temperatures and reduce vibration. It replaces worn or damaged foam to restore a tighter door seal and quieter operation. What it does:

• Provides insulation inside the home-bar compartment door to help maintain consistent temperatures
• Fills the internal cavity and supports the door panel for proper alignment
• Helps reduce rattling or vibration caused by degraded or missing foam
• Can prevent minor cold air loss that occurs with deteriorated door insulation

• Designed for direct replacement; follow the refrigerator service manual for disassembly and reassembly steps
• Use proper tools and avoid sharp objects that could damage the foam or door panel
• Disconnect power to the appliance before starting work to prevent electrical hazards

This refrigerator shelf assembly replaces a damaged or missing shelf to restore a stable storage surface and help keep food organized. It fits into existing shelf tracks and supports refrigerated items for everyday use. What it does:

• Provides a flat, stable surface for storing food and containers
• Replaces cracked, chipped, or broken shelving that can cause spills or unstable storage
• Restores lost shelf space when a shelf is missing or no longer secures in the tracks
• Helps maintain organized interior layout and proper use of door/compartment space

• Remove food and shelving above the installation area before you begin
• Handle glass components carefully and wear gloves to reduce cut risk
• Align the shelf with the interior tracks and slide into place until it seats securely

This Main PCB Power Control Board Assembly controls power distribution and core appliance functions, restoring normal electronic operation when the original board fails. Replace a faulty board to address power and control-related failures. What it does:

• Routes power to electronic components and coordinates control signals across the appliance
• Can stop appliance operation or cause a blank display when the board fails
• May cause intermittent operation, failure to start, or persistent error codes tied to control electronics
• Restores normal control and response when the original PCB is defective

• Disconnect all power before servicing to avoid shock or damage
• Handle the board by the edges and avoid static discharge; use an ESD strap if available
• Do not force connectors; ensure all harnesses seat fully and any mounting hardware is secured