Lsxs6366s/00 Parts

This is the main power control board assembly that manages power distribution and electronic control functions for the appliance. Replacing a faulty board restores control circuitry and communication between components. What it does:

• Regulates and distributes power to motors, compressors, valves and electronic modules
• Processes user inputs and runs control logic for cycles and features
• Can cause no-power, no-display, or unresponsive controls when failed
• Commonly linked to intermittent operation, error codes, or components not running

• Disconnect the appliance from power before starting and work on a dry surface
• Handle the board by the edges and avoid touching components or connectors
• Confirm the replacement PN matches the old board before install

This is a genuine replacement screw used to secure appliance panels and components. It restores proper fastening so panels and assemblies stay aligned and operate safely. What it does:

• Fastens panels, brackets, and small assemblies to maintain structural integrity
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop vibration-related noise when used in its original mounting locations
• Matches the OEM fit to ensure proper alignment and clearance

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or component damage
• Disconnect power to the appliance before working on electrical components
• Replace all matching fasteners for even fit

This is a replacement drain tube assembly that directs water from the appliance tub to the drain pump or household drain, helping restore proper water removal and reduce leaks. It's a direct-fit service part used in the drainage system. What it does:

• Channels wastewater away from the tub to the drain pump or drain line
• Helps prevent pooling or slow draining caused by a damaged or disconnected tube
• Restores a sealed path to reduce leaks at the tub-to-pump connection
• Suitable when the original drain tube is cracked, split, collapsed, or leaking

• One drain tube assembly as shown

• Disconnect power and water before beginning any repair to avoid shock or flooding
• Inspect and clean mating surfaces and clamps; replace clamps if corroded or damaged
• Ensure correct routing and secure connections to prevent kinks and leaks

This cap assembly for the duct secures and seals a dryer/exhaust duct connection to restore proper airflow and help prevent leaks. Designed to replace a worn or damaged duct cap and keep the vent path intact. What it does:

• Caps and secures the duct outlet to maintain a tight connection and reduce air leakage
• Helps direct exhaust airflow through the duct instead of escaping at the connection
• Can reduce lint and moisture escaping at a faulty or damaged duct joint
• Commonly replaced when the original cap is cracked, broken, or no longer holds the duct in place

• One cap assembly

• Disconnect and power off the appliance before servicing; follow the manufacturer's service manual
• Basic hand tools typically required; check panel or vent access before starting
• Inspect surrounding duct and fasteners; replace damaged clamps or tape as needed

This evaporator assembly replaces the sealed evaporator coil and housing that cools the freezer compartment and helps maintain proper low temperatures. Restores cold-air circulation and supports frost-management in frost-free refrigerators. What it does:

• Absorbs heat from the freezer compartment so refrigerant can carry heat away
• Works with the evaporator fan to circulate cold air through the cabinet
• Failing or damaged evaporators can cause warm/freezer not cold, frost buildup, or excessive frost/ice on coils
• Helps stop drip or pooling water from improper defrost when the evaporator assembly is functioning

• One evaporator assembly

• Service may require access to the sealed refrigeration system; follow manufacturer repair procedures
• Handle carefully to avoid puncturing the coil; damaged coils require sealed-system service
• Disconnect power before servicing and wear appropriate PPE when accessing internal components

This Main PCB Power Control Board Assembly replaces the appliance's main electronic control module to restore power management and control functions. It resolves intermittent operation and loss of control caused by a failed main board. What it does:

• Regulates and distributes power to the appliance's control circuits and components
• Controls cycle operations, user interface signals, and safety interlocks
• Helps stop symptoms such as no-power, random shutdowns, or unresponsive controls
• Works with existing wiring harnesses and sensors to resume normal operation

• One Main PCB Power Control Board Assembly

• Disconnect power before servicing to avoid electric shock
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Inspect connectors and harnesses for damage and ensure secure, correct connections during reassembly

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

This cap assembly seals and protects the dryer/refrigeration vent duct where it exits the appliance, helping direct airflow and keep outside air, moisture, and debris out of the duct system. It's a direct-replacement external vent cap. What it does:

• Covers and seals the duct outlet to maintain proper airflow and reduce drafts
• Helps prevent moisture, pests, and debris from entering the duct
• Supports consistent venting to help avoid lint buildup and reduced performance
• Replaces a damaged, cracked, or missing duct cap to restore a proper exterior seal

• One cap assembly for the duct outlet

• Disconnect power and, if applicable, gas before beginning any work
• Remove old cap carefully; wear gloves to protect against sharp edges and lint
• Check and clear the vent path of lint and debris while replacing the cap

This condenser assembly is the factory-style replacement condenser wiring and support used in compatible LG refrigerators to restore proper condenser connections and securement. It helps maintain reliable cooling system electrical routing and component support. What it does:

• Provides the correct wire routing and connections for the refrigerator condenser area
• Secures condenser components in place to prevent vibration and wear
• Restores proper electrical paths for condenser-related circuits to help the compressor/fan operate as intended
• Helps address symptoms like intermittent cooling, unusual vibration, or loose wiring in the condenser compartment

• One condenser assembly as shown

• Disconnect power and follow manufacturer safety procedures before starting work
• Inspect surrounding components (fan, compressor mounts, tubing) while replacing this assembly

This Display Cover Assembly protects and finishes the appliance control panel while keeping the display and buttons visible and accessible. It restores a clean, functional front surface for the control area. What it does:

• Protects the control panel and display from spills, dust, and wear
• Provides a clear window for the LED/LCD readout so status and settings remain readable
• Keeps buttons and touch controls properly aligned and accessible
• Helps maintain the appliance's original appearance and user interface

• Designed for replacement without modifying the appliance; follow manufacturer disassembly steps
• Power off and unplug the appliance before beginning any work to avoid shock or damage
• Handle the cover gently to avoid scratching the clear display area and damaging clips
• Use appropriate tools and retain screws/clips removed during disassembly for reassembly

This cover assembly replaces a damaged or missing outer panel to protect internal components and restore the appliance's finished appearance. It provides a secure enclosure that helps prevent debris and accidental contact with underlying parts. What it does

• Covers and protects controls, wiring, and internal components from dust, spills, and physical damage
• Restores the appliance's exterior look after cracks, breaks, or missing panels
• Helps reduce vibration noise caused by loose or damaged panels
• Keeps access points sealed so controls and fasteners stay secured

• Disconnect power (unplug appliance or switch off breaker) before starting any repair
• Remove any adjacent panels or bezels as needed to access mounting screws—typically requires basic hand tools (screwdriver, nut driver)
• Handle plastic tabs and clips carefully; brittle clips can break when reinstalling
• If fasteners or clips are damaged, replace them to ensure a secure fit.

The Water Filter Assembly is an OEM part for LG refrigerators that feature integrated water and ice. This important assembly helps ensure clean, pure water for drinking and ice production.

Causes of a bad water filter can include failure to change filters regularly as recommended, damage allowing bypass of unfiltered water, or issues with the electronic monitoring head.

Symptoms of a bad water filter assembly include: 

• Cloudy or contaminated water dispensed  
• Decline in filter's contaminant removal abilities
• Alarms signaling need for replacement despite a new filter
• Leaks or drips occurring around the filter housing

This replacement filter is also compatible with Kenmore, Samsung, and some GE models featuring internal water systems.

A replacement refrigerator door handle assembly that restores a secure, easy-to-grip door pull and keeps the door opening and closing smoothly. Designed to match the original fit and finish for a factory look. What it does:

• Replaces a damaged, cracked, or loose door handle to restore safe, reliable door operation
• Provides a secure grip for opening and closing the refrigerator door
• Helps maintain proper door seal by allowing normal use without forcing or wiggling
• Matches the original exterior appearance and mounting locations

• Basic hand tools are typically required; unplug or disconnect power to the appliance before starting
• Support the door while removing or installing the handle to avoid damage or injury
• Keep fasteners and trim in a safe place during install; follow manufacturer torque and alignment guidance

This drawer tray assembly is the replacement storage tray that supports and contains items inside a refrigerator drawer, restoring proper drawer function and organization. What it does

• Replaces a cracked, warped, or broken drawer tray so items sit level and the drawer closes smoothly
• Restores a sealed surface that helps contain spills and prevents items from shifting
• Helps eliminate scraping, catching, or sticking during drawer use
• Fits into the existing drawer housing and works with the factory slide mechanism when the original tray is removed

• One drawer tray assembly as shown

• Installation typically requires removing the drawer and snapping or sliding the tray into the drawer frame
• Handle the part carefully to avoid cracking plastic; inspect mounting rails and clips for damage before installing
• If clips or rails are damaged, replace those components as well—this part replaces only the tray
• Disconnect power and remove stored items from the drawer before starting work

This DC motor is the drive component that turns the appliance's drum or agitator, restoring normal rotation and cycle performance. It replaces a worn or failed motor to help the appliance run smoothly and consistently. What it does:

• Provides rotational drive for the appliance's drum/agitator so loads can be washed, spun, or moved as intended
• Replaces motors that fail to start or run intermittently
• Stops symptoms like no-spin, reduced spin speed, or uneven operation
• Resolves abnormal motor noise, humming, or vibration related to a failing drive motor

• Disconnect power before starting any repair; confirm power is off with a meter when appropriate
• Handle the motor and shaft carefully to avoid damage; support the appliance to access the motor safely
• Reconnect all wiring and mounting hardware exactly as removed; note connector locations before disassembly