Lsxs6366s/00 Parts

This sheath-style defrost heater warms the evaporator during the automatic defrost cycle to clear frost and keep air moving. Replacing a failed heater helps stop ice buildup on the evaporator and restores stable refrigerator temperatures.

• Heats the evaporator coil to melt accumulated frost/ice during defrost
• Helps maintain airflow for consistent cooling performance
• Typical failure symptoms include heavy frost on the back panel/evaporator, weak airflow, warmer-than-normal temperatures, or fan noise from ice contact
• Can contribute to repeat icing shortly after a manual defrost if open or damaged

• Disconnect power before servicing; wear cut-resistant gloves
• Access is typically behind the freezer/evaporator cover; fully defrost any ice before removal
• Reuse existing brackets, clips, or insulation as required; make secure electrical connections
• Do not kink or sharply bend the element; inspect related defrost components

Restore a tight seal on your refrigerator door with this door gasket assembly. A fresh, flexible gasket helps keep cold air in and warm air out, maintaining proper temperatures and reducing frost and moisture around the door.

• Creates an airtight seal between the refrigerator door and cabinet to maintain consistent cooling
• Helps reduce condensation, frost, and warm spots near the door
• May help if the door won't close fully, the gasket is torn or warped, or temperatures fluctuate
• Magnetized edge engages the cabinet for a secure seal when the door is closed

• Unplug the refrigerator before beginning; wear cut-resistant gloves
• Soften the gasket in warm water or with gentle heat to ease installation and improve fit
• Remove the old gasket carefully, noting retainer/channel orientation; press new gasket fully into the track
• Check door alignment and perform a dollar-bill test around the perimeter to confirm a uniform seal

This water filter assembly replaces the refrigerator's water filtration module to help restore clear-tasting water and steady flow. Fits models that use the AGF80300705 assembly and installs at the refrigerator water inlet. What it does:

• Filters sediment and common taste/odor contaminants to improve drinking water quality
• Restores reduced water flow caused by a clogged or failing filter module
• Helps reduce visible particulates and cloudiness in dispensed water
• Prevents unfiltered water from reaching the dispenser/ice maker when installed

• Turn off refrigerator water supply before replacing the assembly to avoid leaks
• Hand-tighten connections; avoid overtightening fittings to prevent damage
• Run and discard the manufacturer-recommended initial volume of water after install to flush the system

This is the drawer tray assembly that supports and guides a refrigerator storage drawer so it slides smoothly and holds items securely. Replacing a damaged tray restores proper drawer operation and usable storage space.

• Supports the matching drawer bucket and provides the slide/track interface
• Helps drawers open/close smoothly and sit level
• Common failure signs: cracked tray, broken rails or tabs, drawer tilting, binding, or falling off the track
• Restores stability to prevent items from spilling or jamming the drawer

• Disconnect power and remove food from the affected drawer area
• Pull out the drawer and lift it off the rails as directed in your model's manual
• Transfer any reusable hardware from the original tray if applicable
• Seat the new tray fully on the rails and test drawer movement before restoring power

The Compressor is an OEM component specifically designed for LG refrigerators. Located inside the refrigerator compartment, the compressor pressurizes and circulates refrigerant through the cooling system. Through precisely timed operation, the compressor maintains optimal freshness.

Symptoms of a bad compressor include:  

• Elevated interior temperatures failing to efficiently chill
• Loud buzzing or vibrating noises coming from inside the walls  
• Frost buildup indicating ineffective cooling cycles
• Complete cooling system failure leaving foods unpreserved

Causes involve refrigerant leaks, blocked airflow to the compressor, or simply wear over tens of thousands of hours of use breaking down moving components.

This OEM LG part is also compatible with some refrigerator models from Kenmore and Sears. Replace to restore reliable, long-term temperature control keeping contents at peak freshness.

This Water Valve Assembly regulates water from the household supply into the appliance's water system for proper operation. Replacing a failing valve restores correct water flow and helps address issues like low flow, no-fill, or leaks. What it does:

• Opens and closes to control water entering the appliance when signaled
• Directs water to internal circuits as designed for fill/dispense functions
• Helps maintain proper fill volume and steady flow
• Common symptoms include no or slow fill/dispense, intermittent water, or leaks at the valve or connections

• 1 water valve assembly

• Disconnect power and shut off the water supply before servicing
• Place a towel or pan to catch residual water and relieve line pressure
• Label or photograph tubing and wire positions; transfer one connection at a time
• Ensure all hoses/tubing are fully seated and clamps/fittings are secure; restore water and check carefully for leaks

The Auger Motor is an OEM part for LG refrigerators. It is responsible for dispensing ice from the icemaker into the ice bucket. 

Symptoms of a bad auger motor include:

• Slow or incomplete ice filling of the ice bucket
• Ice clumping or jamming in the auger assembly 
• Grinding or rubbing noises coming from the icemaker region
• The icemaker not producing any ice at all

Causes of a bad auger motor can be wear and tear over time, freezing or ice buildup preventing proper operation, or failure of internal motor components. 

This OEM LG part is also compatible with select Sears/Kenmore models. 

Replacement door basket that restores secure storage on the refrigerator door, keeping bottles, condiments and small items organized and preventing them from shifting or falling when the door is opened. What it does:

• Provides a stable shelf on the refrigerator door for bottles, jars and small items.
• Replaces cracked, broken or warped baskets that allow items to tilt or fall.
• Snaps or slides into the door shelf supports to restore original storage capacity.
• Keeps frequently used items accessible and helps prevent interior clutter.

• Remove all contents from the existing door shelf before removing the old basket.
• Most installs are done by aligning the basket with the door clips or tracks and pressing until it snaps into place; use gentle, even pressure.
• If fasteners are present, keep them and reattach as needed; follow the refrigerator's service manual or exploded parts diagram to confirm orientation.

This door basket is a replacement refrigerator door bin that restores secure storage on the door shelves, helping keep bottles, condiments and small items organized and upright. What it does:

• Replaces a cracked, broken or missing door bin so items no longer fall out when opening the door
• Provides a molded shelf edge to keep bottles and containers upright
• Restores original storage capacity and organization to the refrigerator door
• Designed to snap into the door shelf mounting points for a stable fit

• One refrigerator door basket

• Remove all items from the door before replacing the bin
• Align the bin with the door shelf mounting slots and press until it snaps into place
• No special tools typically required; handle with care to avoid cracking plastic

This vegetable tray assembly replaces a damaged or worn crisper drawer to restore storage for fresh produce and help keep it organized in your refrigerator. Durable molded construction supports fruits and vegetables while sliding into the cabinet. What it does:

• Replaces a cracked, chipped, or broken crisper/vegetable drawer that won't hold produce
• Restores a smooth sliding drawer action when the tray and guides are intact
• Provides a dedicated, contained space to keep fruits and vegetables organized
• Helps prevent produce from spilling onto lower shelves

• One vegetable/crisper tray assembly

• Unload produce and remove the old tray before installing the replacement
• Inspect drawer rails/guides for damage and clean tracks of debris for smooth operation
• No special tools typically required; handle glass or plastic components carefully to avoid damage

This bucket cover restores the top enclosure of the washer tub so water stays contained and the wash basket operates as designed. It helps protect laundry and internal components from splashes and debris. What it does:

• Fits over the wash bucket to cover the tub opening and direct water flow
• Helps prevent water spray and leaks during fill and spin cycles
• Keeps clothing and loose items from entering the tub gap
• Contributes to stable basket operation and reduces direct contact with internal parts

• Disconnect power and water supply before beginning any repair
• Remove the cabinet or access panel as required by your model to reach the bucket area
• Use appropriate hand tools; support the tub/basket to avoid displacement during removal/installation
• Follow OEM instructions for torque, alignment, and reassembly

The Dispenser Motor is an OEM part for LG refrigerators. It is the motor component housed inside the external ice and water dispenser.  

This dispenser motor controls dispensing functions by operating the ice and water delivery system. It works with electronic controls to precisely dispense desired amounts of cubed ice or chilled water on demand.

Causes of a bad dispenser motor can include failures in motor electronics, damage from water damage, or normal wear over time.

Symptoms of a bad dispenser motor include:

• Inability to dispense ice or water through the external spout  
• Malfunctions in ice or water delivery amounts
• Abnormal sounds or jerky motions from the dispenser area

Replacing the dispenser motor with this genuine LG OEM part restores convenient dispensing capabilities. It is also compatible with Sears/Kenmore refrigerator models.

This AC dispenser motor powers the refrigerator dispenser actuator so the dispenser paddle or lever moves to allow water or ice flow. It restores dispenser movement for consistent dispensing and quieter operation. What it does

• Drives the dispenser actuator/paddle so water or ice can be dispensed when the lever is pressed
• Replaces a motor that hums, stalls, or fails to move the dispenser paddle
• Helps stop intermittent or no-response dispenser operation caused by a faulty motor
• Works as the electrical drive component inside the dispenser assembly

• One AC dispenser motor (EAU61004412)

• Disconnect power (and water supply if applicable) before starting any repair
• Remove dispenser cover/panel to access and replace the motor; handle trim and clips carefully
• Verify electrical connections and secure mounting when reassembling

This Main PCB Assembly is an integral OEM part for LG refrigerators. It regulates the refrigerator's temperature, defrost cycles, and overall functionality. A faulty Main PCB Assembly may disrupt temperature control, cause irregular defrost cycles, or even lead to complete refrigerator failure.

Causes of a Bad Part:

• Electrical surges or power fluctuations
• Exposure to moisture or condensation
• Wear and tear over time

Symptoms of a Bad Part:

• Fluctuating or incorrect temperature readings
• Irregular defrost cycles
• Complete refrigerator failure

This OEM LG part is also compatible with some Kenmore models.

This home bar case assembly replaces the small door compartment that stores bottles and cans on the fridge door, restoring secure storage and organized access to beverages. Durable molded construction keeps items contained and easy to reach. What it does

• Replaces a cracked, broken or missing door beverage compartment that won't hold bottles or cans securely
• Restores proper fit and alignment on the refrigerator door to prevent items from falling out
• Provides the molded shelf needed for organized storage of drinks and small items
• Helps eliminate rattling or loose movement caused by a damaged case

• Basic removal of the old case and snap-in or screw-mount installation of the new case; refer to your model's service instructions
• Power is not required for this replacement, but remove stored items before starting
• Inspect mounting tabs and screws for damage and replace if needed