Lsxs6366s/00 Parts

This Tray Cover Assembly replaces a cracked or damaged plastic cover that protects and secures the appliance tray, restoring proper fit and appearance. It provides a simple, direct replacement for worn or broken covers. What it does:

• Covers and protects tray contents from debris and spills
• Keeps the tray seated and aligned to prevent rattling or shifting
• Replaces cracked, warped, or broken covers that no longer stay in place
• Helps restore proper function and appearance after impact or wear

• One tray cover assembly

• Disconnect power or unplug the appliance before starting any repair
• Remove the old cover by releasing retaining clips or screws as applicable; handle plastic parts gently to avoid breakage
• Align the replacement cover and snap or fasten it into place until all clips engage

The PCB Assembly, Main is an OEM part specifically designed for LG refrigerators. As the central control board, it regulates cooling systems, temperature levels, and integrated features.

Causes of a bad PCB Assembly, Main include wear from continuous usage, accidental damage from spills or impacts over time, and failure of electronic pathways. Consistent maintenance prevents unnecessary replacement. 

Symptoms of a bad PCB Assembly, Main can include: 

• Erratic cooling and inconsistent temperatures inside compartments
• Malfunctions with the ice/water dispenser  
• Error codes or blinking lights on the control panel
• Strange noises developing inside refrigerator walls

Replacing with this genuine LG board restores the full intended cooling performance. Proper food preservation is ensured with optimized circulating air and consistent refrigeration levels. This LG replacement part is also compatible with Sears/Kenmore.

This fan guide is the molded support bracket that positions and protects the refrigerator/freezer evaporator or condenser fan blade, helping maintain proper airflow and reduce noise from the fan assembly. Designed to fit into the fan housing area. What it does:

• Holds the fan blade and motor assembly securely in the correct position for consistent airflow
• Directs airflow across the evaporator or condenser for efficient cooling performance
• Helps prevent fan blade contact with other components, reducing rubbing noise and wear
• Keeps debris away from the fan to protect the motor and prolong fan life

• One fan guide/support bracket

• Disconnect power to the appliance before inspecting or replacing the part
• Access may require removing interior panels or the rear access panel depending on model
• Verify correct orientation and secure mounting; do not force the part into place
• Test fan operation after reassembly to confirm proper fit and clearance

This grille assembly covers and protects the refrigerator fan while helping direct airflow for proper cooling. Replacing a damaged or cracked grille restores protection and helps maintain efficient air circulation around the fan area. What it does:

• Protects the fan blade from debris and accidental contact
• Helps channel airflow for consistent cooling performance
• Reduces rattles or vibration caused by a loose or broken grille
• Visible damage or cracks around the fan area are common reasons to replace this part

• One grille assembly

• Disconnect power to the appliance before starting any repair
• Removal/installation typically requires basic hand tools (screwdriver) and careful alignment
• Handle the grille gently to avoid cracking plastic tabs; verify clips/screws are secure before restoring power

This replacement sensor cover protects the washer lid sensor assembly and helps keep the sensor aligned for proper operation. It restores the sensor housing so lid-detect functions work reliably. What it does:

• Shields and secures the lid sensor assembly from moisture, lint, and physical damage.
• Helps maintain correct sensor alignment so the washer can detect lid position.
• Commonly replaced when the original cover is cracked, broken, or missing.
• Resolves symptoms like lid-not-detected errors or intermittent lid-related cycle interruptions.

• Disconnect the appliance power before beginning any repair.
• Handle the cover and sensor gently to avoid damaging the sensor or wiring.
• Follow the appliance service manual for correct removal and reassembly procedures.

This handle assembly replaces a damaged or loose refrigerator door handle so the door opens and closes securely and looks finished. It restores full grip and alignment without replacing the entire door. What it does:

• Replaces a cracked, broken or loose door handle to restore safe, stable opening and closing
• Provides a finished, OEM-fit grip that maintains door alignment and seal function
• Helps stop rattling or wobble caused by a worn or stripped handle mounting
• Matches factory mounting points for a direct-replacement installation

• Disconnect power to the refrigerator before starting and work with the door empty if possible
• Remove any trim or end caps and retain mounting screws for reuse; handle secures with hidden fasteners
• Use basic hand tools; avoid overtightening fasteners to prevent cracking the handle
• If gasket or trim is disturbed, check alignment and seal before finishing

This PTC thermistor assembly senses temperature and sends a signal to the appliance control so the unit runs at the correct temperature. Replacing a faulty thermistor restores reliable temperature feedback for proper operation. What it does:

• Monitors temperature and provides feedback to the appliance control board
• Helps control cooling/heating cycles by changing resistance with temperature
• Common symptom of failure: incorrect temperature readings or improper cycling
• May also cause extended run times, frequent on/off cycling, or no cooling

• Disconnect power to the appliance before starting any repair
• Handle the sensor and wiring gently; avoid kinks or sharp bends in the thermistor lead
• Test operation after installation and reassemble panels securely

This is an LG refrigerator circuit board assembly, also called a PCB or printed circuit board. It manages the appliance's temperature, defrost timing, and other vital functions. If damaged, the refrigerator may have difficulty maintaining an appropriate temperature. The compressor may run constantly, or may never kick on at all.Unplug the refrigerator before installing this part. It might be a good idea to move food to temporary cool storage, as well. Remove the wire harness and mounting screws from the old control panel and install the new component in its place.This is a genuine OEM part compatible with refrigerators manufactured by LG. It is sold without any additional hardware.

This Main PCB Power Control Board Assembly manages an appliance's power distribution and control signals so the unit responds to user inputs and runs its cycles reliably. Replace a failed board to restore normal control and power functions. What it does

• Receives and routes incoming power to control circuits and components.
• Processes user inputs and sends control signals to motors, valves, and displays.
• Can cause a blank display, unresponsive controls, or intermittent operation when failing.
• Helps stop unexpected shutdowns or failures to start when the original PCB is faulty.

• One Main PCB Power Control Board Assembly

• Disconnect all power before starting service to avoid shock or damage.
• Handle the board by the edges and avoid touching components or exposed contacts; use anti-static precautions if available.
• Verify connector orientation and seating; match wiring harnesses to original locations.
• Reassemble panels and restore power, then test functions before completing repair.

The Door Stopper Assembly is an OEM component specifically designed for LG refrigerators. It secures the fridge door in fully closed and aligned positions. 

The stopper assembly utilizes a pneumatic cylinder and integrated mounts to softly cushion door movement. This allows for smooth closing with an audible click to confirm proper sealing.

Causes of a bad stopper assembly can include cracked or leaking air cylinders after years of use. Loose or sheared mounting hardware may also cause improper alignment and restricted closure.

Symptoms of a bad door stopper assembly include: 

• Gaps forming around the door seal when closed
• Doors difficult to latch fully or align correctly  
• Premature cooling loss from unsealed openings

Replacing this LG part restores a snug, confirmed door shut. The OEM stopper components ensure dependable closing effort for efficient operation. This replacement is compatible with some Kenmore models as well.

This bracket motor secures and supports the appliance motor assembly, restoring proper alignment and stable operation. Replacing a worn or broken bracket helps reduce noise and prevents motor misalignment that can cause poor performance. What it does:

• Holds the motor assembly in the correct position so the motor runs smoothly and stays aligned.
• Prevents excess vibration and rattling caused by a damaged or cracked bracket.
• Helps stop intermittent motor movement or binding that can affect operation.
• Reduces risk of additional wear to the motor or connected components due to misalignment.

• One bracket motor

• Disconnect power to the appliance before beginning any work.
• Replacement typically requires removing access panels and supporting the motor during removal/installation.
• Inspect surrounding fasteners and mounting surfaces; replace any damaged hardware.