Ltcs20020s Parts

This Door Gasket Assembly creates a tight seal between the door and cabinet to keep cold air in and moisture out. Replace a worn or deformed gasket to restore proper sealing and help prevent frost and temperature swings.

• Forms the perimeter seal when the door closes to limit warm air infiltration
• Helps reduce frost, ice, and condensation around the door opening
• Supports stable internal temperatures for consistent cooling
• Common symptoms: torn or brittle gasket, visible gaps, door not closing flush, moisture or frost along the door edge

What's included: 1 door gasket Install notes:

• Disconnect power before beginning any repair
• Let the new gasket sit flat to relax, or gently warm it with a hair dryer on low to remove kinks
• Pull the old gasket from the retaining channel; press the new gasket fully into the groove, starting at the corners
• Close the door and check for uniform contact all around; warm and reshape as needed to improve the seal

This cover support bracket secures an appliance cover or panel, restoring proper alignment and stability. Replacing a damaged support helps eliminate rattles and gaps so the cover seats correctly and stays in place.

• Provides structural support for the associated cover/panel
• Keeps the cover aligned and firmly seated against the cabinet
• Replaces a cracked, stripped, or missing support
• Symptoms include a loose or sagging cover, vibration/rattling noises, or covers that won't stay attached

• Disconnect power before servicing; allow any hot surfaces to cool and wear cut-resistant gloves
• Remove the cover/panel to access the support and retain all mounting hardware
• Install the new support, transferring screws or clips as needed
• Reinstall the cover and verify proper fit before restoring power

This freezer shelf assembly replaces a damaged or missing shelf to restore usable storage space and stable support for frozen items. It fits into freezer compartment shelving tracks and provides a flat, secure surface. What it does

• Replaces a broken, cracked or warped freezer shelf so food and containers sit level and stable
• Restores organized storage when an existing shelf is bent or missing
• Helps prevent items from tipping or spilling inside the freezer
• Matches OEM fit and mounting points for straightforward shelf support

• One freezer shelf assembly

• Remove food and unplug or switch off the appliance power before starting work
• Shelf typically slides or snaps into place on existing shelf supports; no special tools usually required
• Handle shelf carefully to avoid sharp edges on broken plastic or glass
• If mounting clips or supports are damaged, replace them before installing the new shelf

This control case assembly is the replacement outer housing that holds and protects the appliance control board and user interface, restoring a secure fit and proper button/panel alignment for safe operation. What it does:

• Houses and protects the control board and associated electronics from dust, moisture, and accidental contact
• Keeps control panel buttons and switches properly aligned for reliable user input
• Prevents loose or rattling control components that can cause intermittent operation or noise
• Supports the front panel and display mounting for normal appearance and functionality

• Disconnect power to the appliance before starting any repair to avoid electric shock.
• Handle the control board and connectors carefully; avoid touching circuit traces or components.
• Basic hand tools are typically required to remove the panel and transfer the control board into the new housing.
• If the control board is damaged or shows corrosion, this part replaces only the housing unless otherwise specified.

This is the main electronic controller assembly for the washer, responsible for managing cycles, timing and user inputs so the machine runs according to selected settings. Replacing a faulty controller restores normal control and cycle operation. What it does:

• Receives input from the control panel and starts/stops wash cycles and motor functions
• Sends signals to valves, motor and other components to regulate timing and operations
• Processes diagnostics and error reporting used by the washer's display/control interface
• Common symptoms of a failing controller: unresponsive controls, blank or frozen display, cycles that won't start or finish, or erratic/permanent error codes

• One controller assembly

• Disconnect power to the appliance before attempting any service to avoid shock or damage
• Handle the board carefully to avoid static discharge; ground yourself or use an ESD strap when possible
• Verify connector positions and secure all wiring harnesses; do not force connectors

This sheath heater is the tubular heating element that generates hot air for drying cycles, restoring proper heat so laundry dries efficiently and cycles complete as expected. What it does

• Produces heat for the dryer's drum by passing current through a sealed tubular element
• Restores normal drying performance when a failed heater causes little or no heat
• Can stop uneven drying or long cycle times caused by a nonfunctional heating element
• Works with the dryer's internal thermal and safety controls to heat only as designed

• One sheath heater (tubular heating element)

• Turn off power to the appliance at the breaker (or unplug) before starting work
• Handle the element carefully and avoid bending or damaging the sheath and terminals
• Follow the dryer's service manual for removal and replacement

This guide assembly directs and stabilizes the refrigerator/freezer fan to ensure consistent airflow across the evaporator and cooling components. Replacing a damaged guide restores proper air circulation and helps reduce noise from an unsteady fan. What it does

• Holds and centers the fan blade to maintain efficient airflow through the evaporator coil
• Prevents fan wobble or contact with housing that can cause noise or mechanical wear
• Helps ensure even cooling and can reduce frost build-up caused by disrupted airflow
• Supports proper airflow that contributes to consistent temperatures in the cooling compartment

• One guide assembly

• Disconnect power before beginning any repair and follow the appliance manufacturer's safety instructions
• Access may require removing interior panels or the evaporator/fan housing; retain fasteners for reassembly
• Inspect adjacent components while replacing the guide to ensure full repair
• Use only compatible parts and avoid forcing plastic tabs; if clips or screws are damaged, replace them

This drum support roller helps the dryer drum rotate smoothly and quietly by supporting the drum shaft and reducing friction. Replacing a worn roller restores proper drum movement and reduces noise. What it does:

• Supports the dryer drum shaft so the drum turns evenly during operation
• Prevents metal-on-metal contact that causes squealing, grinding or scraping noises
• Helps maintain correct drum alignment to avoid rubbing or uneven wear
• Works with the dryer's axle and bearing system to enable smooth rotation

• One roller

• Disconnect power and move the dryer to a safe, well-lit work area before starting
• Access requires removing the dryer front or rear panel depending on model
• Inspect the drum shaft, bearing, and idler components and replace any worn parts at the same time
• Wear eye protection and gloves; test the dryer empty after installation to confirm quiet, smooth operation