Lud459el Parts

The Hinge is an OEM part for LG dishwashers. It serves as an integral connector allowing the dishwasher door to smoothly swing open and closed during loading and unloading. With precise tolerances and corrosion-resistant construction, the hinge is designed to withstand centuries of use without compromising functionality.

Causes of a bad hinge can include breaking or cracking from heavy pots and pans, damage during installation repairs, or wear from extended use.  

Symptoms of a bad hinge include: 

• Door that does not close or seal properly
• Difficulty or resistance in opening/closing movement  
• Noise or vibration emanating from the hinge area
• Misalignment causing binding or hanging up partially open

This quality replacement hinge also provides a factory warranty and is compatible with models from Amana, Hotpoint, RCA, and select Kenmore dishwashers.

2 wire insulator.

This is a replacement fastener screw used to secure panels and components on compatible appliances, restoring proper fit and reducing movement. It's a simple, direct replacement when an original screw is missing or damaged. What it does:

• Secures access panels, covers, or internal components to prevent rattling and movement
• Helps maintain proper alignment of parts so doors and panels close correctly
• Replaces missing, stripped, or broken screws that can cause loose parts or noise
• Restores the appliance's original fit where a matching OEM fastener is required

• One replacement screw

• Turn off and unplug the appliance before starting any repair
• Use the correct driver and avoid over-tightening to prevent stripping threads
• If the original screw was holding electrical components, ensure power is disconnected and follow OEM safety instructions

Black. 8-18 x 5/16 inch.

Size: 8-32 x 1/4 inch.

This escutcheon is the outer trim piece that covers and protects the appliance control area, restoring a finished appearance and keeping internal components shielded from dust and debris. It replaces cracked, bent, or cosmetically damaged trim. What it does:

• Covers and protects the control panel or switch area from dirt and debris
• Restores a clean, finished appearance when the original trim is scratched or broken
• Helps maintain proper alignment of control openings and mounting points
• Prevents exposure of internal components that can cause snagging or dust buildup

• Disconnect power to the appliance before starting any repair.
• Basic hand tools are typically required; support the panel while removing fasteners.
• Handle edges carefully to avoid cuts; replace damaged fasteners if necessary.
• Do not overtighten screws to prevent cracking the trim.

The Gasket is an OEM part for LG dishwashers. It serves as a critical seal that prevents water leakage throughout the wash cycle. The gasket creates a tight barrier between the door and the base of the dishwasher, allowing water and detergent to properly wash dishes without escaping.

Symptoms of a bad gasket include:

• Puddles or drips of water outside the dishwasher 
• Wet dishes at the end of a cycle despite running normally
• Mineral or chemical buildup around the door seal
• Difficulty closing or latching the dishwasher door firmly

Causes can be regular use over time breaking down the pliable material, or damage such as tears or cracks compromising the gasket's integrity. 

This part is also compatible with select Sears/Kenmore dishwashers.

The Fill Funnel Gasket is an OEM part for LG dishwashers. It is located inside the fill funnel that pours water into the dishwasher during cycles. The gasket seals around the fill funnel to prevent leaks and direct water as intended. 

Symptoms of a bad fill funnel gasket include:

• Water leaking from the fill funnel area into the interior tub during washing cycles
• Puddles forming inside the tub, not related to normal operation  
• Gaps or tears appearing where the funnel meets the surrounding gasket seal

Causes of a bad fill funnel gasket can be wear and tear over time if the funnel is moved often during loading or maintenance. Chemical residue or mineral buildup could also deteriorate the rubber material.

This replacement part is also compatible with Sears/Kenmore models for simple installation and reliable repairs.

This safety switch assembly replaces a failed door/interlock switch to restore the appliance's ability to detect and respond to door position, helping ensure cycles only run when the door is closed. Fits as a direct replacement for the original switch assembly. What it does:

• Detects door/lid position and prevents operation when the door is open
• Helps stop the motor or heating function if the door is opened mid-cycle
• Commonly replaces units that show no power to controls or won't start with the door closed
• Can address intermittent operation or machines that behave as if the door is open

• Disconnect power before servicing to avoid shock or injury
• Replacement requires access to the door/lid area; basic hand tools needed
• Verify proper wiring orientation and secure connectors before reassembly

The Lower Cover Assembly is an OEM part for LG dishwashers. Made of sturdy steel, this lower cover adds structure and protection along the bottom of the appliance.

Causes can involve general wear from years of use and repeated washing cycles. Exposure to moisture also contributes to degrading metal over time.

Symptoms of a bad lower cover include:

• Rust, dents or other damage compromising integrity
• Exposed wires or sharp edges posing a safety hazard
• Drafts or debris entry through openings in the cover
• Loose or misaligned panel affecting performance

This OEM LG part is also compatible with some Kenmore models.

This refrigerator water filter cartridge helps reduce common impurities and improves the taste and clarity of drinking water and ice. It's a direct-replacement style designed to fit compatible LG refrigerator filter housings. What it does

• Reduces sediment, chlorine taste and odor commonly found in household water supplies
• Helps improve the taste and clarity of ice and dispensed water
• Restores proper filtration when your fridge shows reduced water quality or off-flavors
• Maintains normal water flow when properly installed and not clogged

• Replace with power on and water supply turned on; follow refrigerator manufacturer instructions
• Flush several gallons of water through the filter after installation to remove trapped air and loose carbon fines
• Dispose of used cartridge according to local recycling/disposal rules
• If you continue to experience poor water quality or low flow after installation, check the refrigerator's filter housing and water supply line

This upper dishwasher rack replaces a worn or damaged rack to restore safe, stable support for dishes and glassware during wash cycles. It provides proper spacing and alignment so items clean evenly and stay protected. What it does

• Holds plates, cups and lightweight dishware in the dishwasher's upper loading area
• Restores missing or broken tines and support that can cause items to shift or tip
• Helps maintain correct spray coverage for consistent cleaning results
• Reduces risk of chipping or scratching by keeping items separated

• One upper dishwasher rack

• Designed for drop-in replacement; remove lower rack and slide out upper rack guides as needed
• Inspect and replace any damaged rollers or rail clips at the same time for smooth operation
• Disconnect power and follow manufacturer guidelines when accessing internal components

This damper assembly controls airflow between refrigerator compartments to help maintain even temperatures and proper cooling. It replaces a failed or stuck damper to restore normal air distribution and reduce temperature fluctuations. What it does:

• Regulates cold-air flow from the freezer to the fresh-food section for consistent temperatures
• Opens and closes in response to the fridge control to balance cooling needs
• Can cause warm spots, inconsistent cooling, or unusual air movement/noise when faulty
• Works with the cabinet ducting and control motor to direct airflow as required

• One damper assembly

• Disconnect power before starting to avoid shock or damage
• Remove interior panels or duct cover to access the damper; retain screws and fasteners
• Disconnect the wiring harness and remove mounting screws; install new assembly in reverse order
• After installation, restore power and let the unit stabilize; verify damper opens/closes and temperatures normalize