Lud459el Parts

This inlet hose supplies water from your home plumbing to the appliance's water inlet connection, ensuring a reliable flow during operation and helping prevent leaks when properly secured.

• Carries incoming water from the household supply to the unit's inlet valve/port
• Helps resolve issues like no fill, slow fill, or intermittent fill
• Restores proper water supply when the original hose is cracked, kinked, or damaged

• Unplug the appliance and shut off the water supply before servicing
• Keep a towel or container handy to catch residual water
• Hand-thread fittings first to avoid cross-threading, then tighten securely without overtightening
• After installation, turn water on and check all connections for leaks

Size: 10-16 ab.

Size: 8-18 x 1/2 inch.

This is a genuine lock nut replacement. This is a general piece of hardware that is often used on several types of lawn and garden equipment, including in engines, housing, and other areas. The exact application of this part will vary based on the unit. The lock nut is used to create a more secure seal than a standard nut. When properly secured, the lock nut tightens to a bolt and uses an extra locking washer with teeth to ensure a snug fit.If lock washers do get damaged or lost, they need to be replaced immediately with a genuine OEM replacement. This model is compatible with all types of machines and units since it is a generic part. The washer is sold as an individual part and manufactured by Whirlpool. Lock nuts will need to be installed using a socket wrench or adjustable wrench. Pliers, a screwdriver, or another socket wrench will be needed to hold the bolt while the lock nut is being secured in place. Be sure to thread the lock nut carefully to ensure a strong seal and avoid stripping the bolt or the nut.

This wet agent dispenser replaces the washer's liquid fabric softener dispenser to restore proper dispensing during the rinse cycle. It helps keep softener contained until the machine is ready to release it, improving rinse-time performance. What it does:

• Holds and releases liquid fabric softener (wet agent) into the rinse cycle
• Ensures softener is delivered at the correct time for even distribution
• Stops leaking or premature release when the dispenser housing is intact
• Commonly replaced when the dispenser cracks, clogs, or fails to dispense

• Disconnect power to the appliance before starting any repairs
• Access method varies by model; remove dispenser drawer or top panel per your model's service instructions
• Inspect surrounding seals and clips; replace if damaged to prevent leaks

This locker lock is the replacement latch mechanism that secures the appliance door during operation, restoring proper door closure and helping the unit run safely and reliably. Use when a door won't stay closed or the machine won't start. What it does:

• Replaces a worn or broken door latch to restore secure door closure
• Helps ensure the appliance detects a closed door and can start cycles
• Commonly used when the door is loose, won't latch, or causes door-sensor errors
• Fits into the door strike area and engages the cabinet catch for a firm hold

• Locker lock (single replacement latch)

• Disconnect power and water supply before servicing to avoid shock or injury
• Remove the outer door panel or access cover as needed to reach the latch area
• Verify alignment of the latch and striker when reinstalling to ensure proper engagement

This grate captures heavy soils and debris at the bottom of the washer tub to help reduce re-deposition on clothing and keep the drain area clearer. Restores proper soil separation for more consistent wash results. What it does:

• Traps heavy dirt and debris so it doesn't recirculate onto clothes during the wash.
• Helps keep the drain/under-tub area clearer, reducing the chance of clogs.
• Supports proper water flow and soil separation for improved cleaning performance.
• Common symptoms indicating a failing or missing part: clothes still look soiled after a cycle, visible debris in the tub, or frequent drain blockages.

• One grate

• Disconnect power and shut off water before servicing the washer.
• Drain the tub and remove any agitator or tub components required for access.
• Use basic hand tools; avoid forcing parts or over-tightening plastic components.

Seal head assembly replaces the seal around the dishwasher pump motor shaft to stop leaks and protect the motor. It restores a watertight seal so the dishwasher drains safely and avoids cabinet water damage. What it does:

• Seals the pump motor shaft to prevent water from leaking into the motor and cabinet.
• Helps stop under-dishwasher puddling, external leaks, and moisture-related motor issues when the original seal fails.
• Restores proper drainage path by maintaining the seal between the pump and housing.
• Compatible with service procedures that replace the pump seal as directed by OEM diagrams.

• Disconnect power and turn off the water supply before servicing.
• Drain the dishwasher and remove access panels to reach the pump; handle the seal carefully to avoid damage.
• Inspect surrounding gaskets and pump housing for wear; replace any damaged components to ensure a proper seal.
• After installation, run a short cycle and check thoroughly for leaks before returning the dishwasher to regular use.

Touch-up paint for repairing small chips, scratches and scuffs on painted appliance surfaces. Restores the appearance of localized damage so repaired areas better blend with the surrounding finish. What it does:

• Covers small chips and surface scratches to improve cosmetic appearance.
• Helps conceal finish wear on painted metal and plastic trim.
• Lets you spot-repair without replacing large panels or parts.
• Works for quick, visible fixes where full repainting isn't needed.

• Clean and dry the repair area thoroughly before applying; remove loose paint or rust.
• Test on an inconspicuous area first to confirm color match and compatibility.
• Apply sparingly in thin coats with a small brush or cotton swab; allow each coat to dry before adding more.
• Use in a well-ventilated area and keep out of reach of children; follow any handling instructions on the product label.

Replacement latch keeper for the dryer door latch assembly that secures the latch and keeps the door closed during operation. Restores reliable door engagement to help the appliance start and complete cycles. What it does:

• Secures the door latch so the dryer door stays closed during operation.
• Aligns with the latch mechanism to maintain proper door engagement.
• Common symptom: dryer door won't latch or feels loose, causing the cycle to not start or stop unexpectedly.
• Replaces worn or broken keeper pieces that allow rattling or misalignment.

• Disconnect power (unplug electric or shut off gas and breaker) before servicing.
• Access with basic hand tools; remove the door or front panel as needed to reach the keeper.
• Install carefully to avoid cracking surrounding plastic; do not force parts into place.
• After installation, verify the door closes securely and the dryer starts through a test cycle.

Float that detects and communicates water level to the appliance control so the washer or dishwasher can fill and drain properly. Replaces a cracked, stuck, or worn float to restore reliable water sensing. What it does:

• Senses water level and relays position to the machine's control system.
• Helps prevent overfilling or unintended continuous filling when working correctly.
• Can resolve symptoms such as flooding, constant filling, no fill, or improper drain cycles.
• Works with the appliance's existing valve and switch components to re-establish normal fill/drain operation.

• Disconnect power (and water supply where applicable) before beginning service.
• Remove outer panels or tub shroud to access the float; use basic hand tools.
• Handle clips and fittings gently; do not force plastic tabs or connectors during removal/installation.
• After installation, restore power and run a test cycle to ensure correct fill and drain behavior.

Right side

The Rail Assembly is an OEM part for LG dishwashers. It is a part that supports and guides the motion of the dish racks in and out of the dishwasher. The rail assembly is designed with precision fits and smooth surfaces to allow easy extension and retraction of the racks.

Causes of a bad dishwasher rail assembly can include wear and deterioration over time, damage from heavy loads that put stress on the rails, or impact damage from accidental handling.

Symptoms of a bad rail assembly include:

• Difficulty extending or retracting the dish racks
• Noisy or grinding sounds when operating the racks
• Misalignment of the racks that causes dishes to rub or stop moving properly
• Leaks or pooling of water inside the dishwasher door

This LG part is also compatible with some Kenmore models.

The Dish Rack Tine is an OEM part for LG dishwashers. It is a key component that makes up the dish rack assembly and serves the essential purpose of supporting and orienting dishes during the washing cycle. The tines are designed with precise contours and resilient materials to securely hold a variety of dishware without tipping or sliding.

Symptoms of a bad dish rack tine include:

• Dishes slipping or sliding out of place during the wash cycle
• Chipped, cracked, warped, or bent tines that no longer firmly grip dishware
• Missing pieces that compromise the integrity of the dish rack assembly 

Replacing deteriorated tines can help restore optimum washing performance by ensuring dishes are properly positioned under spray jets. A functional dish rack is necessary to achieve clean results without damage to delicate items.

This OEM LG part is also compatible with Kenmore models. 

This flexible replacement hose routes water safely in your appliance to restore normal water flow and prevent leaks. It replaces a worn, cracked, or leaking factory hose so your appliance can operate reliably. What it does:

• Carries water between components to maintain proper appliance operation
• Helps stop leaks caused by brittle, cracked, or damaged hoses
• Compatible with original mounting and connection points when replacing the same part number
• Common symptom: visible leaks, reduced water flow, or water pooling near the appliance

• Turn off power and shut off water supply before attempting replacement
• Inspect fittings and clamps; reuse only if undamaged, otherwise replace with proper hardware
• Ensure secure, leak-free connections and verify no kinks in the hose after installation

This float dome positions and protects the float inside the tub so the appliance can sense water level correctly. Replacing a cracked or missing float dome helps restore reliable fill control and reduces overfill or erratic fill symptoms. What it does

• Houses and guides the float so the fill sensor detects water level accurately.
• Prevents the float from sticking or catching on the tub, which can cause overfilling.
• Helps stop intermittent or continuous fill problems caused by a broken or displaced float.
• Keeps debris away from the float area to reduce false water-level readings.

• Disconnect power and water supply before accessing the tub or removing panels.
• Remove the lower access panel or kickplate to reach the float area; handle plastic parts gently to avoid cracking.
• Inspect surrounding seals and the float itself; replace any damaged components for reliable operation.
• After installation, restore power and run a short fill/drain cycle to verify correct float movement and water-level control.

Split-ring seal designed to secure a door or panel gasket and maintain a watertight/airtight joint, helping stop leaks and keep the appliance operating properly. Ideal for replacing worn or damaged seals. What it does:

• Holds and seals the gasket or trim in place to prevent water or air from escaping.
• Restores a tight seal around doors, panels or openings that show gaps or wear.
• Helps stop common symptoms like leaking, moisture buildup, or visible gaps at the seam.
• Keeps components aligned so doors close smoothly and seals wear evenly.

• Always disconnect power and turn off the water supply before starting any repair.
• Use hand tools to remove trim or retaining rings carefully; wear gloves to protect hands from sharp edges.
• Inspect surrounding gasket and mounting surface; replace damaged gaskets and clean mating surfaces before installing the new ring.
• After installation, test the appliance for proper seal and operation.