Mac - Mfd2561hew Parts

This genuine OEM replacement part is a rebuild kit of various gaskets used in a gas-powered leaf blower engine. This kit includes a crankshaft gasket, a carburetor gasket and carburetor adapter gasket, a cylinder base gasket, and a muffler shield. Gaskets act like a seal between different parts of an engine that keeps different liquids and gasses from passing into the wrong section of the engine. Gaskets can become worn out and crack or shrink over time through repeated use and exposure to exhaust and heat in the engine. A common sign of a fault gasket is if your engine is not running at full capacity or if it stalls out shortly after ignition. Changing out a gasket should not be a difficult job, but it will depend on which gasket you are replacing. Making this repair will require a screwdriver and set of pliers. This gasket rebuild kit is compatible with Poulan, Weed Eater, and Husqvarna gas powered leaf blowers. These gaskets are made of a mix of plastic and rubber. This kit ships individually and is sourced directly from its original manufacturer.

This cylinder head is a genuine Husqvarna part, sold individually. This cylinder head can be used as a replacement part in a leaf blower. The purpose of the cylinder head in a leaf blower is to affix to the top of the cylinder block and close off the combustion chamber within the cylinder, so that airflow in and out of the cylinder block can be regulated and controlled to exact specifications for standard use of the leaf blower.The cylinder head in a leaf blower might have to be replaced if the cylinder head is dented, punctured, scraped, torn, cracked, chipped, or otherwise damaged to the point of exposing the internal combustion chamber to the elements or to possible leakages from the inside or outside of the component. If this occurs, the cylinder head should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This cylinder head is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

The piston ring provides a seal between the cylinder wall and the piston, attaching inside the groove around the piston directly. It is responsible for keeping the combustion gases in the cylinder and preventing them from entering the crankcase. The piston ring may break down with general use over time or it may break unexpectedly due to some kind of damage or other mechanical failures. This creates poor compression in the cylinder and can result in a loss of power to the equipment. Significant leaks could result in an engine that won’t run at all. The Husqvarna piston ring is a genuine OEM part from American Yard Products, who manufactures equipment and parts for leading industry brands, including Husqvarna, Craftsman, Poulan and Poulan Pro, Weed Eater, Sears/Roper, Rally, Electrolux Home Products, and Yard Pro. This piston ring fits several models of leaf blowers and trimmers from the brands listed. Refer to your user manual parts diagram for exact part compatibility.

As a small engine fuel tank, this part is designed to ensure your engine is secure, vented, and has clean fuel at all times. Many fuel tanks come with a vented gap to prevent pressure or a vacuum from being created in the fuel system. If fuel is coming out of the cap, a replacement cap may be required. Maintenance should be done on the fuel tank if you notice leaking or see debris floating in the tank. Repairing a damaged tank can result in fuel contamination, leakage, or fire, so replacement is the favored option. If the tank is damaged or cracker, replacement is required. The fuel should be drained before starting with the replacement process. This fuel tank is designed to attach to leaf blowers manufactured by Weed Eater, Craftsman, and Poulan. The fuel tank is a genuine OEM component that comes directly from the manufacturer. It comes as an individual part and does not include a fuel filter. The part is white and weighs less than six oz with dimensions of 9 x 3 x 2.5 inches. Attaching a new fuel tank will require the use of a hex screwdriver.

Leaf blowers are noisy machines in general, but could be far louder if they were not fitted with mufflers. This is the part that catches the sound emitted by the engine and keeps pressure in the engine at a balanced level. When a blower seems to running at a level of noise that is far above normal or if it doesn't seem to run as powerfully as it should, it might be that the muffler needs to be replaced. This replacement blower muffler is designed for use on blowers made by Husqvarna, Poulan and Weed Eater. It will suppress the amount of noise exiting from the engine. This is an OEM replacement part that is made of metal and ships individually. Replacing it is not a very complex task, but will vary from model to model. It can often be managed with only a screwdriver.

This locknut is a genuine Husqvarna part, sold individually. This locknut can be used as a replacement part in string trimmers, leaf blowers, edgers, and chainsaws. The purpose of a locknut for one of these small engine outdoor appliances is to serve as a fastening component within the internal mechanisms of the appliance in conjunction with a bolt.If the locknut has been stripped away or, in its absence, has left one or more components detached from the appliance, the locknut should be replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This locknut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Poulan Pro, and Paramount.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Normally screws are found in many different types of appliances. These parts are important in holding different pieces together so that the user is able to operate the machine effectively. A new screw might be needed if some parts of the appliance are loose or missing from place.Screws can become stripped over time with normal equipment use. If this is the case it is recommended that they be replaced. The repair for this screw is simple and will most likely require common household tools as well as pliers. This screw is made of durable metal made for long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is also a genuine OEM replacement part.

This replacement part is a retaining ring. This is a genuine replacement part made by Husqvarna. This part acts as a fastener and is used to hold certain components together. This ensures that the machine is working efficiently during use. A new retaining ring might be needed if the current one is visibly damaged or is no longer able to stay attached to the machine. If the ring has become stripped over time, it might be best to replace it so that the appliance can return to working order. This should be a simple repair and only require common household tools such as screwdrivers or pliers. Refer to the owner's manual for more information on how to repair this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This spark plug is a genuine Husqvarna part, sold individually. This spark plug can be used as a replacement part for tillers, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners.Spark plugs in outdoor appliances such as these might have to be replaced if they are not functioning as usual. If the ignition system is not working, if the spark plugs are not igniting in the first place, or if the spark plugs are igniting but the engine is not powering on, it is likely that the spark plugs are damaged and should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This spark plug is compatible with the following outdoor appliance brands: Husqvarna, Stihl, Craftsman, Weed Eater, Toro, Cub Cadet, Ryobi, Homelite, Poulan, Wheel Horse, Tecumseh, Tanaka, Black Max, and Green Machine.

The genuine replacement primer bulb covers the primer base and plunger on specific leaf blower models. Before starting the leaf blower, the primer is pushed to allow fuel to flow into the carburetor to assist in a smooth engine start. It can also make starting the equipment easier after it has been sitting for a period of time. The bulb is made of plastic and exposed to the elements, so over time it can become cracked, worn, or even completely lost. Without it, the engine cannot be properly primed before operating and therefore will not run as well. Replacing the bulb with a genuine OEM model like this should be done as soon as possible. This OEM primer bulb is manufactured by Husqvarna and can be used for a variety of leaf blowers that are manufactured by the brand. This model is also compatible with Poulan, Craftsman, and Weed Eater products. The bulb is made of durable rubber and may require a screwdriver for replacement to assist in fitting the bulb into place. This unit is sold individually and does not include the primer base assembly or any hardware.