Mav 8551 Aww Parts

4 button temperature switch. Color: White.

This power cord supplies electrical power to the appliance and replaces a damaged or worn cord to restore safe, consistent power delivery. The "as wrapped" packaging means the cord ships neatly coiled for protection in transit. What it does:

• Provides the appliance's main AC power connection so it can operate
• Replaces frayed, cut, or otherwise damaged cords to eliminate power loss
• Can resolve symptoms like no power, intermittent power, or visible cord damage
• Designed for direct replacement where the OEM cord mounts and terminates the same way

• Unplug the appliance or disconnect power at the breaker before servicing
• Route the cord and attach with the existing strain relief or mounting bracket
• Ensure connections match the original cord terminals and are tight

This plastic snap-in clip secures interior panels, trim pieces, or lightweight components to appliance frames, keeping parts held firmly and reducing rattles or sagging. It's a simple, reliable fastener for replacements and repairs. What it does:

• Secures panels, trim, wire harnesses, or insulation to the appliance frame
• Restores proper fit and alignment when a worn or broken clip allows gaps or movement
• Helps eliminate rattling, vibration noise, or loose parts caused by a missing fastener
• Low-profile design snaps into place for a finished appearance

• One plastic snap-in clip (quantity: 1)

• Usually installs by pushing the clip into the matched hole until it snaps; may require a small flat tool to remove the old clip
• Inspect mating hole and surrounding area for damage before installing replacement
• Disconnect power and empty the area if working near heating elements or electrical components

This water inlet valve controls water flow into the appliance so cycles fill correctly and ice/water features work reliably. Replaces a failed valve to restore normal fill and stop unwanted leaks. What it does:

• Directs and controls water entering the appliance during fill cycles
• Commonly fixes no-fill, slow-fill, or overfill symptoms
• Stops water flow when the machine is off to prevent continuous running
• Operates with the appliance's water supply and internal solenoids

• Disconnect power and shut off the household water supply before you start
• Inspect supply hoses and connections; replace any damaged fittings
• Typical tools: screwdriver and pliers; keep a towel handy for residual water
• After installation, turn water and power back on and test for proper fill and leaks

A snap-style hose clamp that secures flexible appliance hoses to fittings to help maintain a leak-free connection. Simple, durable replacement for a lost or worn hose clip to keep hoses seated and stable. What it does

• Secures a flexible hose to a nipple or barb to help prevent accidental disconnection
• Helps maintain a tight connection that reduces risk of leaks at the hose joint
• Commonly used on drain, fill, or internal circulation hoses where a small snap clamp is required
• Small, low-profile design fits in tight spaces and resists shifting under normal use

• One snap-style hose clamp

• Disconnect power and shut off water supply before beginning any repair
• Access may require removing panels or disassembling interior components depending on appliance
• Pry open or compress the clip as needed with pliers to remove and reinstall; ensure hose is fully seated on the fitting before securing
• Inspect the hose and fitting for damage; replace hose if cracked or degraded

This 10-32 x 3/8 machine screw secures panels and components in many appliances where a small, threaded fastener is required. It replaces stripped, missing, or loose screws to restore stable assembly and reduce vibration. What it does:

• Fastens panels, brackets, and small components using 10-32 unified threads
• Restores secure mounting when screws are missing, stripped, or loose
• Helps stop rattling, misalignment, and intermittent part contact caused by loose fasteners
• Works wherever a 10-32 x 3/8 machine screw is specified by the manufacturer

• Disconnect power or unplug the appliance before servicing
• Use the correct size screwdriver or nut driver to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Replace with the same size and thread spec to ensure proper fit and function

Color: White

This factory screw secures appliance panels and components, keeping them properly aligned and quiet during operation. Replace a stripped, corroded, or missing fastener to restore a snug fit and dependable performance in the original mounting location. What it does:

• Fastens brackets, panels, trim, or internal hardware to the cabinet/frame as specified by the manufacturer
• Helps maintain proper alignment and reduce rattling or vibration when a screw is worn or missing
• Direct replacement for damaged, stripped, or rusted hardware
• Used in various locations per the service diagram; match to the original position

• 1 screw

• Disconnect power (and shut off water or gas, if applicable) before servicing.
• Compare length and thread style to the original; install in the same location.
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten.
• Reinstall any brackets or panels in the correct order.

The Timer Knob is an OEM replacement part for Whirlpool dryers. It allows users to set cycle durations with smooth, intuitive adjustment.

Symptoms of a faulty timer knob include:  

• The timer knob does not turn or is difficult to turn.
• The timer knob is missing

Causes of a bad timer knob can include loose or stripped internal gears from an extended operation or impact damage during loading/unloading clothes. 

Note: This is the center portion of the knob only. For the complete knob assembly, the cap and skirt must also be purchased.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This tub-to-pump hose connects the washer's outer tub to the drain pump, carrying water out of the machine during the drain cycle. Replacing a cracked or clogged hose can help stop leaks and restore consistent draining.

• Connects the washer's outer tub to the drain pump
• Transfers wash water to the pump during drain cycles
• A damaged or obstructed hose may cause leaks under the machine or slow/no draining
• Visible splits, soft spots, or kinks indicate the hose should be replaced

• Disconnect power and turn off water supply; protect the area with towels or a shallow pan
• Access the pump area; note hose routing and clamp positions before removal
• Inspect and clear the tub outlet and pump inlet; seat the new hose fully and secure with clamps
• Run a brief fill/drain test and check carefully for leaks before reassembly

This brake spring restores proper tension in the washer's transmission brake so the basket stops promptly and releases cleanly for spin. Replacing a fatigued or broken spring helps bring back smooth, reliable spin and stopping performance.

• Maintains brake tension to hold the basket stationary between cycles
• Releases the brake during spin so the basket can reach proper speed
• Helps stop the basket smoothly at cycle end
• Common signs include no/slow spin, basket coasting too long after spin, or brake squeal/grinding when stopping

• Disconnect power and water before servicing; wear gloves and eye protection.
• The brake spring is under tension—secure the assembly and carefully relieve spring force before removal.
• Access typically requires removing drive components to reach the brake assembly; support the washer safely if tilted.
• After installation, hand-rotate the drive pulley to ensure smooth brake engagement and release before running a test cycle.

This small strainer sits inside the washer's water inlet valve and screens out sand, rust, and sediment from the supply lines. Replacing a clogged or missing screen restores normal fill flow and helps protect the valve.

• Filters debris from incoming hot and cold water before it reaches the valve and tub
• Helps maintain consistent water flow during the fill cycle
• A clogged or damaged screen can cause slow fill, very long fill times, or no fill
• Common causes for replacement include mineral buildup or rust/sediment from supply lines

• Unplug the washer and turn off both water supplies
• Place a towel or shallow pan, relieve hose pressure, and disconnect the fill hoses from the inlet valve
• Carefully pull out the old screen (needle-nose pliers work well); press the new screen fully and evenly into the valve port
• Reconnect hoses, restore water and power, and check for leaks
• Tip: Many washers have separate hot and cold inlets—inspect both screens and replace as needed