Maytag Cwe 4800 Parts

The Hinge Bushing is an OEM part for GE refrigerators designed to fit within the hinge assembly of your refrigerator, providing support and smooth movement for the door.

A bad hinge bushing can be caused by regular wear and tear over time or damage due to mishandling or impact. If you notice that your refrigerator door is not opening or closing smoothly, or if it feels loose or wobbly, it may indicate a problem with the hinge bushing.

Symptoms of a bad hinge bushing include:

• Difficulty in opening or closing the refrigerator door
• Door not staying securely closed
• Door sagging or misaligning with the refrigerator frame

Replace your faulty hinge bushing with this genuine OEM part to restore your refrigerator door. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This right-side freezer door bracket secures and positions the freezer door hinge so the door opens and closes smoothly and stays aligned. It helps restore proper door fit and prevents sagging or uneven gaps. What it does:

• Supports the freezer door hinge assembly and holds the door in correct alignment
• Helps stop door sagging and reduces rubbing or binding when opening/closing
• Restores a tight door fit to help maintain proper seal and cooling performance
• Can address symptoms like a misaligned, loose, or drooping freezer door

• One right freezer door bracket

• Disconnect power to the appliance before starting any repair
• Remove contents and, if needed, the freezer door to access the bracket
• Use proper tools and keep hardware organized; replace any damaged screws or fasteners

This left freezer door bracket secures the freezer door to the cabinet and helps maintain proper alignment for smooth opening and closing. Replaces a bent or broken bracket to restore door support and fit. What it does:

• Supports the freezer door at the hinge area to keep the door properly aligned.
• Prevents door sagging that can cause gaps or improper sealing.
• Restores stable hinge movement for easier opening and closing.
• Helps maintain an even seal to reduce warm air intrusion.

• Power and water: unplug the appliance and shut off water before starting work.
• Use basic hand tools; remove the door or hinge cover per OEM procedure before replacing bracket.
• Keep door supported during removal/installation to prevent injury or damage.

This replacement screw secures appliance brackets, panels, and components. It restores a tight, aligned fit when the original hardware is stripped, rusted, or missing, helping reduce vibration and rattling for reliable operation.

• Fastens brackets, panels, or mounts to keep components secure and aligned
• Replaces missing, stripped, or corroded hardware
• Helps reduce vibration, rattling, or loose/misaligned parts
• Matches original spec for reliable hold and fit

• Disconnect power before servicing; use proper PPE
• Match thread and length to the removed screw before installation
• Start threads by hand to prevent cross-threading; tighten until snug—do not overtighten
• Ensure parts are aligned and seating surfaces are clean before tightening

This is a replacement round-head screw sized 10-24 x 5/8 in. It secures trim, panels, and internal components so parts stay aligned and appliances run quietly and safely. What it does

• Fastens panels, brackets, and trim pieces in place
• Prevents loose parts that can rattle or cause misalignment
• Replaces missing or stripped screws to restore secure mounting
• Works where a 10-24 x 5/8 round-head screw is required

• Disconnect power before servicing the appliance
• Use the proper screwdriver or nut driver to avoid stripping the head
• Align parts before tightening and thread gently to avoid cross-threading
• Do not over-tighten; stop when snug to prevent panel distortion

This 1/4-20 hex washer head screw secures panels and components in place, restoring proper fit and eliminating movement. It fits common appliance assemblies that use a 7/8" long, 1/4-20 threaded fastener. What it does:

• Fastens panels, brackets, and assemblies that use a 1/4-20 thread
• Restores secure fit when original screw is missing, stripped, or loose
• Helps stop rattling, vibration, and misalignment caused by loose hardware
• Matches common OEM head style for tool-ready installation with a socket or wrench

• Disconnect power to the appliance before servicing where applicable
• Use the correct 1/4-20 socket or wrench; install hand-tight then snug—do not overtighten
• Replace like-for-like: head style, thread size, and length before installing
• If fastener holes or threads are damaged, repair or retap before reuse

A left-hand closure door assembly that replaces a worn or broken door closure to restore proper sealing and smooth drawer/door operation. Helps stop drafts and keeps compartments closing correctly for reliable performance. What it does

• Guides and supports the left-side door/drawer as it closes to ensure proper alignment.
• Helps form a tight seal to reduce air leakage and maintain interior temperature.
• Prevents rattling or catching that can occur when the closure is damaged or worn.
• Commonly replaced when the door doesn't stay closed, binds, or leaves a visible gap.

• Disconnect power to the appliance before starting any repair.
• Basic hand tools are typically required; access may involve removing a drawer or trim panel.
• Handle parts carefully to avoid damaging surrounding panels or gaskets.

A left-hand hinge center assembly that secures the refrigerator door at the center hinge to restore proper support and alignment. Replaces a worn or damaged hinge center to reduce door sagging and improve smooth opening. What it does:

• Provides a stable pivot point at the door's center hinge for correct alignment and support.
• Helps stop door binding, uneven gaps, and rubbing by restoring proper hinge geometry.
• Transfers load between upper and lower hinge halves so the door closes and seals correctly.
• Designed as a direct-replacement service part matching OEM fit and function.

• Support the door before starting—remove or brace the door to prevent it from falling.
• Disconnect power to the appliance if working near electrical components or the light switch.
• Remove hinge fasteners and replace with the new hinge center; tighten hardware securely but do not over-torque.
• Check door alignment and operation after installation; adjust hinge mounting as needed for an even gap.

This left-side freezer bracket slide secures and guides a freezer shelf or drawer, restoring stable support and smooth movement. Replaces a broken or worn slide to keep freezer shelving aligned and functioning. What it does:

• Supports the left side of a freezer shelf/drawer and guides sliding motion
• Prevents shelf sagging, misalignment, or catching when opening/closing
• Replaces cracked, bent, or missing brackets that allow shelves to drop
• Helps restore even weight distribution for safe storage

• Disconnect power before servicing and work with the freezer empty and temperature stabilized
• Remove freezer drawers/shelves for access; keep track of fasteners
• Use basic hand tools; align bracket before tightening to avoid binding

This damper controls airflow to the refrigerator vegetable/produce pan to help maintain proper humidity and cooling for fresh food. Replacing a worn damper restores balanced airflow and helps keep produce crisper. What it does:

• Opens and closes the vent to regulate cold air entering the vegetable/produce pan
• Helps maintain proper humidity and temperature in the crisper area
• Commonly used when produce becomes wilty or the fresh-food compartment cools unevenly
• Prevents overcooling or insufficient airflow to the crisper drawer

• Disconnect power to the appliance before attempting repair
• Remove shelves/drawers as needed for access; handle glass shelves carefully
• Verify damper orientation and secure mounting before reassembly

This water filter cover secures the XWFE-style refrigerator water filter in its housing and helps maintain a proper seal for reliable water flow. It's a direct-fit replacement that restores the filter door's fit and alignment. What it does:

• Holds the XWFE water filter in place inside the filter housing
• Helps maintain a tight seal to prevent leaks and ensure correct water flow
• Restores proper alignment and latching of the filter access door
• Useful when the original cover is cracked, warped, or missing

• Remove power or follow manufacturer guidance before servicing the water/filter area
• Access the filter housing per your owner's manual; cover typically snaps or screws into place
• Inspect the filter O-ring and housing for damage; replace components if needed

This defrost heater and harness assembly melts frost buildup from the evaporator coil to help maintain proper cooling and efficient defrost cycles. It replaces a damaged or open heater and the attached wiring harness for reliable operation. What it does:

• Heats the evaporator coil during defrost cycles to remove accumulated frost and ice
• Restores defrost function when original heater is burnt out or harness wiring is damaged
• Helps prevent excessive frost that can reduce cooling performance
• Compatible with refrigerators that use an integrated heater-and-harness assembly

• Disconnect power to the appliance before attempting any repair to avoid shock hazard
• Access typically requires removing the evaporator cover inside the freezer compartment
• Inspect mounting clips and connectors; secure heater and harness to match original routing

The Oven Door Glass Spacer is an OEM part for Whirlpool ovens. This part helps maintain the structural integrity of the oven door, preventing heat escape, and ensuring the door glass remains securely in place during the oven's operation. 

Causes of a bad Oven Door Glass Spacer can range from wear and tear over time, leading to degradation or loss of the spacer, to improper installation that may cause the spacer to dislodge or fail to provide adequate support. 

Symptoms of a malfunctioning Oven Door Glass Spacer include:

• Loose or rattling oven door glass
• Uneven gaps around the door glass, indicating misalignment
• Heat leaking from around the oven door, potentially affecting cooking performance

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This silicon controlled rectifier (SCR) switches and regulates power to heating or motor circuits, helping the appliance control temperature and run cycles reliably. It's a direct-fit electronic switching component used in a variety of control systems. What it does:

• Acts as an electronic switch to regulate AC power to heating elements or motors
• Helps control temperature output and maintain consistent cycle performance
• Can prevent unwanted continuous current flow when functioning properly
• Commonly replaced when ovens, ranges, or dryers fail to heat or cycle correctly

• One silicon controlled rectifier (SCR) as shown

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle the SCR by its body; avoid touching terminals and static-sensitive areas
• Verify proper orientation and secure mounting; follow OEM wiring and torque practices

A replacement 1/4-20 screw that secures panels, brackets, and components on compatible appliances for reliable fit and safe operation. Use this fastener to restore proper assembly and reduce rattles or loose parts. What it does:

• Threads into 1/4-20 tapped holes to hold panels, braces, or hardware
• Restores secure attachment where a missing or stripped screw allowed panels or trim to shift
• Helps eliminate vibration noise caused by loose fasteners
• Matches OEM fit for correct alignment and clearance

• Disconnect power to the appliance before servicing to avoid electrical hazards
• Use the correct driver or socket to avoid stripping the head
• Start threads by hand to prevent cross-threading; tighten securely but do not overtighten
• Keep hardware and small parts away from children and pets