Maytag Cwe 4800 Parts

A replacement Phillips flat-head screw sized 10-14 x 3/4 inch for appliance assembly and panel fastening. Replaces worn or missing fastening hardware to keep panels, brackets, and components secure and aligned. What it does:

• Secures panels, trim, brackets, and internal components where a 10-14 x 3/4" Phillips flat-head screw is required.
• Restores proper fit and prevents rattling, vibration, or gaps caused by missing or stripped screws.
• Provides a direct hardware match for repairs calling for this screw size and head style.

• Disconnect power to the appliance before starting any repair work.
• Use the correct size Phillips screwdriver to avoid stripping the screw head.
• Tighten until snug; avoid over-tightening which can strip threads or crack panels.
• Replace any corroded or damaged mating hardware to ensure a secure fit.

This painted 8-32 x 5/8 inch screw secures trim and panels on appliances, providing a concealed, rust-resistant fastener that keeps exterior parts aligned and stable. Use it when a small painted fastener is missing or damaged. What it does

• Fastens trim, panels, and light-duty interior/exterior components
• Matches painted finish to blend with appliance surfaces
• Prevents rattling or gaps caused by missing or stripped screws
• Suitable where a 8-32 thread and ~5/8" length are specified

• Use the correct size Phillips or compatible driver to avoid cam-out
• Start threads by hand to avoid cross-threading
• Tighten snugly but avoid over-tightening to prevent stripped threads or damaged trim
• Disconnect power and move any panels/panels safely before servicing nearby components

A .250-inch diameter set screw used to secure shafts or components in place, preventing unwanted movement and maintaining proper alignment. Small, durable fastener for appliance assemblies where a countersunk or threaded retention point is required. What it does

• Secures collars, pulleys, knobs, or shafts to prevent slipping or rotation
• Restores proper engagement when a loose or missing set screw causes wobble or misalignment
• Helps eliminate intermittent operation caused by shifted mechanical parts
• Works where a compact, recessed fastening point is needed

• Disconnect power and remove access panels before servicing
• Start threads by hand to avoid cross-threading; tighten with the correct hex/driver
• Do not overtighten—use firm, controlled torque to avoid damaging threads or mating parts
• Replace only with the same size and thread type specified by the OEM

This top hinge assembly replaces a worn or broken left-side pad hinge to restore proper door support and alignment. It's the left-side hinge used where the door meets the cabinet top for smooth opening and secure closing. What it does:

• Replaces a cracked, warped, or missing top hinge pad assembly to stop door sag and uneven gaps
• Restores proper door alignment so the door seals and closes evenly
• Reduces rubbing or catching that can occur when the hinge pad is damaged
• Helps eliminate noise from a loose or worn hinge area during opening and closing

• Disconnect power to the appliance or unplug before starting work
• Support the door while removing or installing the hinge to prevent dropping or damage
• Use the original mounting screws or OEM-recommended fasteners; torque to manufacturer guidance
• Inspect adjoining hinge hardware and door alignment after installation; adjust as needed for an even seal

This sound-deadening mastic helps quiet refrigerator operation by damping vibration on components and panels. Replace deteriorated or missing mastic to reduce rattles, buzzing, and metal-to-metal contact for smoother, quieter performance. What it does:

• Damps vibration between sealed-system tubing, compressor mounts, and cabinet surfaces
• Helps reduce humming, rattling, or buzzing noises from the rear/bottom of the unit
• Replaces hardened, cracked, or fallen-off mastic
• Helps prevent metal-to-metal contact that can amplify noise

• Sound-deadening mastic

• Unplug the appliance before accessing the rear compartment
• Remove old material and clean surfaces; ensure they are dry before applying the mastic
• Press firmly to secure; do not obstruct fans, vents, or moving parts
• Avoid stressing or puncturing sealed-system tubing;

This case corner cap is a molded corner cover that restores the finished appearance of a refrigerator cabinet and protects edges from dings and wear. It replaces a cracked, chipped or missing corner and helps keep cabinet panels aligned. What it does

• Covers and protects the cabinet/door corner from impact damage and wear
• Restores a uniform finished appearance for cosmetic repair
• Helps maintain panel alignment at the corner to reduce gaps and rubbing
• Commonly replaced when the corner is cracked, broken, loose or missing

• Disconnect power and remove food from the area before starting repairs.
• Remove any trim or fasteners securing the old cap; install the replacement by snapping or fastening into place as designed.
• Avoid forcing the cap; ensure clips or tabs align to prevent damage.
• If clips or underlying trim are damaged, replace those parts as needed for a secure fit.

This striker top mullion replaces the top striker piece that the refrigerator door latch catches on, restoring proper door engagement and a tight seal. Useful when the striker is worn, damaged, or misaligned. What it does

• Provides the mating strike surface for the door latch so the door stays securely closed.
• Helps maintain an even door seal to reduce cold-air leaks and temperature loss.
• Stops door misalignment or rattling caused by a worn or broken striker.
• Compatible with standard mullion assemblies that use a separate top striker piece.

• One striker top mullion.

• Disconnect power and remove food from the door area before starting work.
• Inspect the surrounding mullion and latch for wear; replace damaged components as needed.
• Handle edges carefully; mounting screws or clips may be required.

The Top Hinge Assembly is an OEM part for GE refrigerators responsible for providing stability and support to the refrigerator door, ensuring proper alignment and sealing. It helps maintain the temperature inside the refrigerator by keeping the door securely closed.

A bad top hinge assembly can be caused by wear and tear over time, excessive weight or force applied to the door, or damage due to accidental impact or mishandling.

Symptoms of a bad top hinge assembly include:

• Difficulty in opening or closing the refrigerator door.
• Uneven alignment or gaps between the door and the refrigerator body.
• A loose or wobbly feeling when opening or closing the door.
• The door not staying closed properly.

Replace your worn-out or damaged top hinge assembly with this OEM part. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

A rubber tubing grommet that fits a factory hole to protect and cushion refrigerant/water tubing and help prevent chafing or leaks. Simple, durable replacement that restores a sealed pass-through for tubing. What it does:

• Cushions and protects tubing where it passes through sheet metal or plastic openings
• Helps prevent chafing, rubbing and premature tubing wear
• Provides a cleaner, more secure tubing pass-through to reduce leak risk
• Commonly used on water lines, refrigerant lines or small-diameter tubing in appliances

• One tubing grommet

• Disconnect power and water supply before servicing the appliance
• Remove access panels as needed to reach the tubing hole; press-fit the grommet into the opening and route tubing through the slit
• Replace grommet if cracked, torn or excessively worn; ensure tubing is properly seated in the grommet
• Do not use sharp tools that could damage the grommet or tubing during installation

This middle door cover is the molded interior trim piece that restores the refrigerator door's appearance and protects internal components and insulation. Replacing a damaged cover improves fit and looks without changing door function. What it does:

• Covers and protects internal door cavities, wiring and insulation behind the middle section
• Restores a secure mounting surface for door bins and shelves
• Replaces cracked, warped or cosmetically damaged trim that allows gaps or loose fittings
• Helps maintain a proper door seal by ensuring correct bin/shelf alignment

• One middle door cover (dark gray)

• Disconnect power to the appliance before servicing
• Remove door bins/shelves and any fasteners that secure the cover; keep hardware for reuse
• Align tabs and screw holes, then install using the original fasteners; do not force the part into place

This is a replacement screw used to secure appliance components and panels so parts stay properly attached for safe operation. It's a direct-fit fastener matching OEM form and function. What it does

• Secures panels, trim, or internal components to prevent rattling or gaps
• Restores factory attachment where a screw is missing or stripped
• Helps maintain proper alignment of housing and service access
• Suitable when repair requires original-fit fasteners

• Disconnect power or unplug the appliance before servicing to avoid shock
• Use the matching screwdriver or bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage to threads or plastic parts
• Keep removed screws organized; replace only the screws that match the original locations

This switch actuator is the small control lever that presses a switch inside the appliance control panel so the user's button or dial can change settings. It restores reliable physical actuation for responsive controls. What it does

• Transfers user input from a button or dial to the internal switch so circuits can change state
• Replaces a broken, worn, or missing actuator that causes unresponsive buttons or stuck controls
• Helps restore proper control-panel operation without replacing the whole switch assembly
• Works with the original internal switch mechanism to maintain OEM fit and function

• Disconnect power to the appliance before any service to avoid shock or injury.
• Access the control panel or console per the service guide; actuator is usually secured to the front control or switch housing.
• Remove only the damaged actuator and install the replacement; do not force parts or modify components.

This center track guides and supports the fresh-food door drawer, helping the drawer slide smoothly and stay aligned for reliable access and seal. Replaces a worn or damaged center track to restore normal movement and alignment. What it does:

• Provides a stable sliding surface for the fresh-food drawer/door
• Restores smooth opening and closing when original track is worn or cracked
• Helps maintain proper door alignment to reduce gaps that can affect cooling
• Common symptom: drawer sticks, jams, or tilts during operation

• One center track for the fresh-food drawer/door

• Turn off power to the appliance before beginning any service
• Access usually requires removing the drawer/door assembly and fasteners; keep hardware organized
• Inspect companion tracks and rollers; replace any worn pieces to ensure smooth operation

This right-side freezer drawer rail holder secures the drawer glide to the cabinet so the drawer opens and closes smoothly. A direct-fit replacement that restores proper drawer alignment and support. What it does:

• Supports the freezer drawer on the right side and keeps the glide in the correct position
• Guides the drawer during opening and closing to reduce sticking or uneven movement
• Replaces worn, cracked or broken rail holders that cause misalignment or noisy operation
• Works with the matching left rail holder to maintain even drawer travel

• Designed to install using existing cabinet and drawer hardware; verify orientation before fastening
• Power off and remove food and drawers before working to avoid injury or damage
• Handle plastic parts carefully to avoid cracking; use hand tools and avoid over-torquing
• If clips or screws are damaged, replace them with OEM-specified fasteners

This left-side freezer drawer rail holder secures the drawer rail so the freezer drawer opens and closes smoothly. Replaces a worn or broken holder to restore stable drawer tracking and prevent the drawer from sagging or binding. What it does:

• Supports the freezer drawer rail assembly and maintains proper alignment during sliding
• Keeps the drawer from tilting, catching, or coming off the track when opened or closed
• Replaces cracked, broken, or missing holders that cause noisy or uneven drawer movement
• Works with the rail system to help the drawer operate smoothly under normal load

• One left-side freezer drawer rail holder

• Disconnect power to the appliance before service to avoid electrical or injury risk
• Remove the freezer drawer and rail assembly per the manufacturer's instructions to access the holder
• Inspect mating rail and fasteners; replace any damaged clips or screws for a secure fit
• Use common hand tools;