Maytag Cwe 4800 Parts

This access cover closes a service opening on the refrigerator cabinet, protecting internal components and restoring a secure, finished fit. Replacing a cracked or missing cover helps keep debris out and supports proper operation and airflow paths.

• Covers the machine/service compartment to shield wiring, fan, and other components from contact and debris
• Helps maintain designed airflow through the compartment when properly installed
• Reduces vibration and rattling when the cover is secured
• Replace if the cover is missing, cracked, warped, or no longer fastens securely

• Disconnect power before servicing
• Remove any retaining screws/clips and note the cover's orientation and vent/slot alignment
• Transfer any original grommets or insulation to the new cover if present
• Reinstall with existing hardware; do not overtighten; ensure openings/vents remain unobstructed

The Icemaker Fill Cup is an OEM replacement part for GE refrigerators responsible for directing the water flow into the icemaker, allowing for the creation of ice cubes. It securely attaches to the icemaker, preventing any leaks or spills that could disrupt the ice production.  

A bad fill cup can occur due to several factors. Common causes include cracks, damage, or wear and tear over time. If you notice symptoms such as leaks around the icemaker, improper ice production, or water overflow, it may indicate a need to replace the fill cup.

Symptoms of a bad fill cup include:

• Leaks around the icemaker area
• Insufficient or inconsistent ice production
• Water overflow or spills

Restore your refrigerator's ice-making capabilities by replacing the faulty fill cup with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Icemaker Fill Tube Heater is an OEM component specifically designed for GE refrigerators. Located near the icemaker assembly, this heating element plays a crucial supporting role.

Symptoms of a bad fill tube heater include:

• Irregular or inconsistent ice production amounts  
• Cracked, cloudy or malformed ice cubes being generated
• The icemaker failing to operate or stop working altogether
• Water or moisture around the refrigerator icemaker area 

Causes can include wear over time from powering on during each ice-making cycle. Mineral deposits may also form and insulate the heating surface, reducing effectiveness.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This replacement drain tube channels defrost and condensation water from the evaporator area to the drain pan, helping prevent water pooling and ice build-up in the fresh-food section. Restores proper drainage when the original tube is damaged. What it does:

• Directs defrost/condensation water to the drain pan during the refrigerator's automatic defrost cycle.
• Helps stop water pooling inside the fresh-food compartment and under crisper drawers.
• Reduces risk of frost or ice buildup near the evaporator when the original tube is cracked, kinked, or clogged.
• Provides a direct-fit replacement for the factory drain path when specified by OEM part number.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Remove food and drawer assemblies as needed to access the evaporator/drain area; some residual ice or water may be present.
• Clear any drain blockages and ensure the tube is seated without kinks so water flows freely to the drain pan.

The Quick Space Shelf is an OEM component for GE side-by-side refrigerators. With adjustable sliding shelves on silver tracks, it provides flexible small-item organization and storage optimization. Convenient access relies on functional shelving. 

Symptoms of a faulty quick space shelf include:  

• Shelves sticking or jamming during movement along tracks
• Difficulty retracting or extending shelves fully  
• Warped or cracked plastic interfering with balanced item placement

Causes involve repetitive overloading weakening mounting rails, moisture exposure distorting shelf material integrity, or wearing of track rollers inhibiting smooth sliding over extended use.

Replacing with this genuine GE shelf ensures dependable quick access storage through resiliently engineered shelving. Compatible for Hotpoint, RCA, or Kenmore units seeking small area preservation and convenient retrieval of condiments or snacks.

The Center Hinge is an OEM part for GE refrigerators. It is responsible for connecting and supporting the refrigerator doors, allowing them to open and close smoothly.

A bad center hinge can be caused by wear and tear over time, excessive weight or force applied to the doors, or damage due to accidental impact or mishandling.

Symptoms of a bad center hinge include:

• Difficulty in opening or closing the refrigerator doors.
• Squeaking or grinding noises when opening or closing the doors.
• The doors not staying securely closed.
• Uneven alignment of the doors.

Replace your worn-out or damaged center hinge with this genuine OEM part. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Evaporator Harness is an OEM replacement part for GE refrigerators. This harness is responsible for connecting the evaporator fan motor and the defrost heater to the main control board, allowing for cooling and defrosting. It enables the fan motor to circulate cold air throughout the refrigerator and the defrost heater to melt any accumulated frost or ice on the evaporator coils.

A bad evaporator harness can occur due to wear and tear, damage, or loose connections. If you notice symptoms such as inadequate cooling, excessive frost or ice buildup in the freezer, or the refrigerator not defrosting properly, it may indicate a need to replace the evaporator harness.

Symptoms of a bad evaporator harness include:

• Inadequate cooling
• Excessive frost or ice buildup in the freezer
• Improper defrosting

Restore your refrigerator by replacing the faulty evaporator harness with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
 

This 12-24 screw secures brackets, panels, and other hardware in GE refrigerator assemblies. Replacing a stripped or missing fastener restores a tight, rattle-free fit and helps keep doors, handles, and internal components properly aligned.

• Fastens components where a #12-24 screw is specified
• Replaces damaged, stripped, corroded, or missing hardware
• Helps resolve loose handles/panels, vibration noises, or minor misalignment caused by missing screws
• OEM-grade hardware for a precise fit in the designated locations

• Disconnect power; turn off water supply if working near water lines
• Match the new screw to the original; start threads by hand to avoid cross-threading
• Support the part being secured (door/handle/panel) during removal and installation
• Use the correct driver/bit that matches the screw head; tighten snugly without overtightening

The Door Closure Spring is an OEM replacement part for GE refrigerators. This spring ensures that the refrigerator door closes securely and maintains a tight seal, preserving the freshness of your food and preventing energy loss. The door closure spring provides the necessary tension to keep the refrigerator door properly aligned and closed. It helps to prevent air leaks and maintain consistent temperature levels inside the refrigerator.

A bad door closure spring can occur due to wear and tear over time or accidental damage. If you notice symptoms such as a loose or sagging refrigerator door, difficulty in keeping the door closed, or a compromised seal, it may be time to replace the door closure spring.

Symptoms of a bad door closure spring include:

• Loose or sagging refrigerator door
• Difficulty in keeping the door closed
• Compromised seal resulting in temperature fluctuations

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This meat pan is the removable deli drawer that stores cold cuts, cheese and packaged meats in the refrigerator, keeping them organized and helping contain spills. Durable molded plastic fits into the fresh-food compartment tracks. What it does:

• Provides a dedicated drawer for deli items and fresh meats to keep them separated from other foods
• Helps contain juices and small spills to make cleanup easier
• Slides in and out on internal refrigerator tracks for easy access
• Restores proper fit and organization when the original drawer is cracked, warped or missing

• One meat pan / deli drawer

• Slide the pan into the existing drawer tracks; no hardware required in most installations
• Inspect tracks and mounting ribs for damage before installing; replace damaged parts as needed
• Clean with mild soap and water; avoid abrasive cleaners or high heat
• Keep out of direct heat sources and do not use in oven or microwave

The Freezer Lower Slide is an OEM replacement part for GE refrigerators. It is designed to provide smooth and easy movement of the freezer drawer, allowing for convenient access to your frozen goods.

A bad freezer lower slide can occur due to factors such as wear and tear, damage, or misalignment. If you notice symptoms such as difficulty in sliding the freezer drawer, a loose or broken slide, or an unstable freezer compartment, it may indicate a faulty or malfunctioning left freezer lower slide.

Symptoms of a bad freezer lower slide include:

• Difficulty in sliding the freezer drawer
• Loose or broken slide
• Unstable freezer compartment

Restore your refrigerator's freezer drawer by replacing the faulty left freezer lower slide with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This spring feeler arm is the replacement sensing arm used with the refrigerator ice maker assembly to detect ice level and help actuate the ice-making mechanism. Restores proper ice sensing and helps prevent overfill or stoppage. What it does:

• Acts as the ice maker's feeler/bail arm to detect when the ice bin is full or empty.
• Triggers the ice maker to stop or continue cycles based on ice level.
• Helps prevent overfilling and reduces ice production problems caused by a bent or broken arm.
• Can stop erratic ice maker behavior when the original arm is damaged or worn.

• Disconnect power to the refrigerator before beginning any repair.
• Handle the arm carefully and inspect the ice maker mounting points for damage before installation.
• Reuse factory hardware if undamaged; replace any stripped or missing fasteners.

The Evaporator Cover is an OEM replacement part for GE refrigerators. It is responsible for covering and protecting the evaporator coils located inside the refrigerator or freezer compartment.

A bad evaporator cover can occur due to wear and tear over time or damage caused by mishandling or accidents. If you notice symptoms such as frost buildup, inconsistent cooling, or excessive noise, it may indicate a need to replace the evaporator cover.

Symptoms of a bad evaporator cover include:

• Frost accumulation on the coils
• Uneven cooling or inconsistent temperature
• Excessive noise or vibration during operation

Restore your refrigerator by replacing the faulty evaporator cover with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Door Bin is an OEM replacement part for GE refrigerators. It is designed to fit on the refrigerator door, providing storage space for bottles, jars, and other items.

A bad door bin can occur due to wear and tear, accidental damage, or misalignment. If you notice symptoms such as a cracked or broken rack, difficulty in storing items on the door, or items falling off the rack, it may indicate a need to replace the door bin.

Signs of a faulty door bin include:

• Cracked or broken shelf
• Difficulty in storing items on the door
• Items falling off the shelf

Restore your refrigerator's door by replacing the faulty door bin with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.