Maytag Cwe 4800 Parts

The Door Bin is an OEM replacement part for GE refrigerators. It is designed to fit on the refrigerator door, providing storage space for bottles, jars, and other items.

A bad door bin can occur due to wear and tear, accidental damage, or misalignment. If you notice symptoms such as a cracked or broken rack, difficulty in storing items on the door, or items falling off the rack, it may indicate a need to replace the door bin.

Signs of a faulty door bin include:

• Cracked or broken shelf
• Difficulty in storing items on the door
• Items falling off the shelf

Restore your refrigerator's door by replacing the faulty door bin with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

This bar reinforcement is a replacement support brace that restores strength and alignment to the appliance trim or door assembly. It helps secure panels and prevents sagging or flexing for reliable everyday use. What it does:

• Provides structural support for the door or trim assembly to reduce flex and maintain alignment
• Restores a loose or sagging panel to proper position
• Helps keep connected components stable during normal operation
• Designed to fit into the original mounting points and distribute load where the factory part did

• Follow the appliance manufacturer's service manual for disassembly and reassembly steps
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• Disconnect power (or gas, if applicable) and remove food/contents from working area before starting

This condenser fan and housing assembly circulates air across the condenser coils to help your refrigerator dissipate heat and run efficiently. Replaces a damaged or worn housing and fan to restore proper airflow and cooling performance. What it does

• Moves air over condenser coils so the compressor can shed heat and maintain cooling
• Prevents overheating and helps the system run more efficiently
• Can stop loud fan noise, rattling, or reduced cooling when the fan or housing is damaged
• Restores correct airflow when the original housing is cracked, bent, or obstructed

• One condenser fan and housing assembly

• Disconnect power to the appliance before starting any repair
• Access may require removing rear or bottom access panels; keep track of fasteners
• Handle sheet metal edges and fan blades carefully to avoid cuts and damage
• After installation, verify fan spins freely and recheck connections; confirm proper cooling

This switch actuator is the replacement lever that engages a refrigerator door/dispenser switch so controls respond reliably. It restores proper switch actuation to help items like lights, dispensers, or ice/water controls work correctly. What it does:

• Replaces a worn or broken actuator that fails to depress the switch plunger
• Allows the door or dispenser mechanism to trigger the switch reliably
• Helps resolve symptoms such as lights not turning on, dispenser or ice/water functions not responding, or intermittent switch behavior
• Works with the corresponding OEM door/dispenser switch assembly to restore normal operation

• One switch actuator

• Disconnect power (unplug or shut off breaker) before starting work
• Access may require removing the door panel or dispenser bezel; keep fasteners and trim organized
• Inspect the mating switch and surrounding parts for damage; replace the switch if the plunger is worn or broken

This glide support secures and guides a refrigerator drawer so it opens and closes smoothly, helping restore proper alignment and load-bearing for the left-side drawer. Ideal when the drawer slips, binds, or drops out of its track. What it does:

• Supports the drawer glide/slide mechanism on the left side and keeps the drawer tracking correctly
• Prevents the drawer from sagging, catching, or falling out when pulled
• Restores smooth, even drawer movement and reduces binding or rough operation
• Works with the refrigerator's existing slide hardware to carry drawer weight safely

• Unplug the appliance before starting any repair to avoid shock or injury
• Remove the drawer and existing glide hardware to access mounting points; basic hand tools (screwdriver) typically required
• Inspect mating slide components for wear and replace both sides if damaged for best performance

This evaporator block seal is a refrigerator freezer gasket that helps seal the evaporator assembly to limit air and moisture migration, reducing frost buildup and helping the cooling system run efficiently. What it does:

• Seals the evaporator block area to prevent moist air from reaching cold surfaces
• Helps reduce frost and ice accumulation on the evaporator and evaporator cover
• Supports consistent cooling by maintaining the intended airflow path
• Can reduce defrost frequency when the original seal is damaged or worn

• 1 evaporator block seal

• Disconnect power to the appliance before starting any repair
• Replacement typically requires removing the evaporator cover or assembly; handle evaporator fins and components carefully
• Inspect surrounding foam, clips, or adhesive; replace or resecure as needed to ensure a proper seal
• After installation, restore power and verify proper cooling and defrost operation

This left-side hinge top pin assembly secures the refrigerator door to the cabinet hinge, restoring proper alignment and smoother door movement. Use it to replace a worn or damaged top hinge pin for improved closing and reduced door sag. What it does:

• Secures the door at the cabinet top and provides the pivot point for opening and closing
• Replaces worn or bent pins that can cause door sag, misalignment, or rubbing
• Helps the door close more evenly and maintain a consistent seal
• Works with the existing hinge components to restore smooth hinge action

• Disconnect power to the appliance and remove stored items from the door before starting
• Support the door while removing and installing hinge parts to prevent dropping or damage
• Basic hand tools are typically required; follow the appliance manufacturer's service instructions
• Replace all affected components for a secure fit

This duct air tower assembly directs cold air through the freezer/refrigerator cabinet to maintain even cooling and proper airflow. Replaces a damaged or cracked air tower to reduce warm spots and restore consistent circulation. What it does:

• Channels cold air from the evaporator into the cabinet, helping maintain uniform temperatures.
• Helps prevent localized warm spots and food spoilage caused by disrupted airflow.
• Restores proper defrost/airflow routing if the original duct is cracked, warped, or missing.
• Works with the evaporator/airflow system—symptoms include uneven cooling, frost buildup, or reduced airflow.

• One duct air tower assembly

• Disconnect power to the appliance before beginning any repair.
• Access requires removing interior panels/shelves—handle plastic parts gently to avoid cracking.
• Inspect mating seals and clips; replace any damaged fasteners for a secure fit.

This evaporator cover houses and protects the freezer evaporator coil while directing airflow for even cooling and helping limit frost buildup. It restores proper airflow routing behind the freezer liner for consistent temperature control. What it does:

• Protects the evaporator coil from contact and debris
• Guides cold air from the evaporator into the freezer compartment
• Helps reduce localized frost accumulation on the coil and liner
• Can address symptoms like poor/freezer cooling, uneven temperatures, or increased frost/icing

• One evaporator cover (housing) as shown

• Disconnect power before beginning any repair
• Remove interior panels and shelves per your model's service instructions to access the evaporator area
• Handle carefully to avoid damaging the cover tabs, mounting points, or nearby wiring/insulation
• After installation, reassemble panels and verify proper fan operation and normal cooling

The Compressor is an OEM component specifically designed for GE top-mounted and bottom-mounted refrigerator freezers. Responsible for circulating refrigerant, its robust motor compressively moves gas to chill interiors reliably. Permanent lubrication withstands constant operation.

Symptoms of a faulty compressor commonly involve cycling off too frequently or inefficient temperature regulation. Loss of pressure from degradation risks expensive repairs necessitating replacement. 

Causes of a bad compressor relate to typical wear reducing circulation. Over-activation exposes motor windings to damage requiring timely change.

Causes of a bad compressor can involve:

• Failure to maintain set temperatures 
• Frost buildup impairing performance
• Vibrations transferring to cabinetry

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire refrigerators. Replace to retain steady refrigeration preserving freshness for dependable operation long-term.
 

This selector control provides the hi/lo switching function for the oven/range heating circuit, restoring user control over high and low heat settings. It replaces a failed selector so the range can select the proper heat level reliably. What it does:

• Switches between high and low heat settings for the heating element or burner
• Restores control when heat setting changes do not respond or stick
• Helps eliminate intermittent or no-heat conditions caused by a worn selector
• Matches OEM function and mounting for a direct replacement

• One selector control assembly as shown

• Disconnect power to the appliance before starting any repair
• Handle electrical connections carefully; note wire locations or take a photo before removal
• Use basic hand tools; do not force connectors or mounting tabs

This water dispenser tube carries chilled water from the refrigerator water valve to the dispenser, restoring reliable water flow for drinking and filling containers. Fits common front-dispense systems and replaces damaged or cracked tubing. What it does:

• Channels water from the internal valve to the exterior dispenser spout
• Stops leaks and restores normal dispensing when original tube is cracked, split, or blocked
• Maintains sanitary water path when replaced with a clean, intact tube
• Works with gravity-fed and valve-driven dispenser assemblies

• Disconnect power and shut off the refrigerator water supply before starting
• Handle tubing ends carefully; ensure secure fittings or clamps to prevent leaks
• Trim tubing squarely if needed and test for leaks at low pressure before regular use

This upper divider basket replaces the removable compartment divider used to separate items in the appliance's storage basket, helping keep contents organized and accessible. It restores the intended layout and containment for smaller items. What it does:

• Separates and organizes items inside the upper basket to prevent shifting and mixing
• Restores proper fit and containment when the original divider is cracked, broken, or missing
• Helps maintain airflow and access to stored items by keeping compartments tidy
• Visible, molded replacement that matches the original mounting points and profile

• One upper divider basket

• Empty the basket and remove any shelves or trays needed to access the divider before installing
• Inspect mounting tabs or slots for damage and align the part with the original attachment points for a secure fit
• Use care to avoid forcing clips; damaged clips may require replacement of the mounting hardware