Maytag Ffht1835vw Parts

The Socket is an OEM part for Frigidaire refrigerators. It is responsible for holding and connecting the light bulb in the refrigerator, allowing for proper lighting inside the appliance.

A bad light socket can be caused by electrical issues, physical damage, or wear and tear over time. Signs of a faulty light socket include a non-functional light bulb, flickering or dim lighting, or a loose connection.

Symptoms of a bad light socket can include:

• The refrigerator light not turning on 
• Intermittent flickering or dimming of the light
• Difficulty in installing or removing the light bulb
• Visible damage on the socket

Replace your malfunctioning light socket with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This precision bearing supports a rotating component inside your appliance, reducing friction for smooth, reliable operation. Replacing a worn bearing can eliminate noise and restore proper movement in the affected assembly.

• Provides low-friction support for a rotating shaft or component
• Helps maintain alignment for smooth, quiet operation
• Common symptoms include squealing/grinding noises, wobble/play, or binding/seized rotation
• Excess drag can cause overheating or motor overload

• Disconnect power and shut off gas/water supplies as applicable before service
• Match orientation to the original and your model's diagram for placement
• Clean the shaft/bore and inspect mating parts; replace worn components; apply OEM-approved lubricant only if specified
• If press-fit is required, use proper drivers/press tools; do not hammer directly on the bearing

Color: White. Used for the upper hinge holes.

The Wire Harness is an OEM part for Frigidaire refrigerators. It is a bundled set of multi-colored insulated wires that connect electronic and mechanical components inside the refrigerator. The wire harness reliably transmits power and control signals throughout the appliance. 

Symptoms of a bad wire harness include:

• Loose, frayed, or damaged wiring  
• Intermittent operation of lights, fans or temperature control
• Buzzing or humming noises coming from wires
• Error codes related to communicating with modules

Causes of a bad wire harness can include insulation cracking from repeated flexing/bending over time and exposure to liquid or rodent damage. This puts components at risk of short-circuits.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. Replace yours today to avoid potential electrical issues.

This compressor kit replaces a failed refrigerator compressor and the small electrical parts needed to restore the cooling system. It provides a ready set of components to help the appliance pump refrigerant and maintain proper temperatures. What it does:

• Replaces the refrigerator compressor motor that circulates refrigerant through the cooling loop
• Includes the basic electrical start/run parts needed to help the compressor restart and run reliably
• Commonly used when the appliance fails to cool or the compressor hums but doesn't start
• Helps address symptoms like warm temperatures in the fridge/freezer and a non-cycling compressor

• One compressor and accompanying electrical components as shipped

• Installation requires handling refrigerant lines and should be performed per local refrigerant and safety regulations
• Power to the appliance must be disconnected before starting work
• Replace any refrigerant and service fittings per OEM instructions; use correct refrigerant and oil specified by manufacturer
• Verify electrical connections and test for leaks after installation

This replacement access cover restores the appliance's finished appearance while protecting internal components and controls from dust and debris. It helps keep wiring and small parts secure so the unit operates safely. What it does:

• Protects control assemblies, wiring and internal components from dust, spills and accidental contact
• Restores a secure, finished fit when the original cover is cracked, broken or missing
• Helps prevent loose parts from shifting during use and reduces risk of debris-related issues
• Visible damage, a loose or rattling cover, or gaps around the control area are common signs this part is needed

• One replacement access cover

• Disconnect power (unplug or switch off circuit) before starting any work
• Remove necessary trim or panels to access mounting screws; keep fasteners for reassembly
• Handle plastic clips and tabs gently to avoid breakage; use proper tools (screwdriver, trim tool)

This replacement refrigerator door hinge restores smooth door movement and correct alignment, helping the door close fully and maintain a proper seal to protect food and reduce gaps caused by a sagging door. What it does:

• Supports and pivots the refrigerator door to restore proper opening and closing and stop door sag or droop.
• Realigns the door to help maintain an effective seal and reduce uneven gaps or cold-air leakage.
• Stops grinding, scraping or rough door movement caused by a worn or damaged hinge.
• Provides a direct replacement part to restore normal door operation.

• Disconnect power or unplug the appliance before beginning service to avoid electrical hazards.
• Support the door (have a helper or use a support block) and remove door contents to prevent injury or damage.
• Use appropriate hand tools to remove and install fasteners; align the door before fully tightening hardware.

This replacement cover protects internal components and restores the appliance's finished appearance. It helps keep wiring and parts enclosed for safer operation and reduces dirt and moisture intrusion to prolong component life. What it does:

• Shields internal components and wiring from debris and accidental contact
• Helps reduce rattling or vibration by securing exposed openings
• Restores the appliance's exterior finish where a cover was cracked, warped, or missing
• Supports safe operation by keeping live parts inaccessible

• One replacement cover

• Disconnect power (unplug or switch off breaker) before beginning work
• Remove fasteners from the damaged cover, note screw locations, and save hardware if reusing
• Align new cover, secure with the correct screws, and confirm it sits flush without pinching wires

This is a replacement door hinge for refrigerators that supports and guides the door for smooth opening and closing. It restores proper door alignment to help maintain an even seal and consistent cooling. What it does:

• Secures the refrigerator door to the cabinet and allows the door to pivot properly
• Restores correct door alignment to reduce gaps that can cause warm air leaks
• Helps eliminate door sag, rubbing, or uneven closing
• Works with factory mounting points so the door seals and operates as designed

• Verify left/right and upper/lower orientation before installing; hinge orientation varies by model
• Use the same mounting screws and positions installed by the manufacturer; do not overtighten fasteners
• Support the door during removal/installation to prevent injury or damage
• Disconnect power to any powered door components (ice maker/water lines not typically affected)

This replacement screw fastens appliance components so panels, brackets, and covers stay securely in place. Replace a missing, stripped, or damaged screw to restore a tight fit and help prevent vibration or noise. What it does:

• Secures panels, brackets, trim, or covers as designed for your model
• Replaces missing, rusted, or stripped hardware
• Helps correct loose or misaligned components
• Reduces vibration and rattling from loose fasteners

• Includes: 1 screw

• Disconnect power before servicing
• Wear gloves and eye protection
• Use the correct driver to avoid stripping the screw head
• Tighten snugly without overtightening; refer to your model's parts diagram for exact location

This replacement cover is an access panel that protects internal components and keeps the appliance looking finished. It provides a secure barrier to help prevent debris from entering and allows service access when maintenance is needed. What it does

• Covers and protects internal parts from dust, dirt and incidental contact
• Helps reduce airflow of loose debris into the component area
• Provides a finished exterior appearance after repair or service
• Allows access to controls or components when removed
• Fits where the original factory cover was installed

• One replacement cover

• Disconnect power (and gas if applicable) before starting any repair
• Remove fasteners holding the old cover; keep hardware
• Align cover and reinstall screws until snug; do not overtighten
• Use caution: edges may be sharp and panels may be thin

This outer refrigerator door replaces a damaged or dented cabinet door to restore appearance and proper sealing. It provides the structural panel that mounts hinges, handles and the door gasket for normal operation and cooling performance. What it does:

• Replaces a damaged or dented outer refrigerator door panel
• Restores correct hinge alignment and door closing pressure
• Helps maintain proper internal temperature by supporting the gasket seal
• Prevents drafts, moisture intrusion and cosmetic blemishes

• Disconnect power and remove any food from door shelves before starting
• Door panels are heavy and may require two people to position and install
• Support the cabinet and follow OEM hinge/fastener order to avoid damage
• Check gasket condition and hinge fasteners after installation; adjust for proper seal

This tube is a direct-replacement plumbing/air line used in compatible Frigidaire appliances to route fluid or condensate. It restores proper flow and helps prevent leaks or pooling when the original tube is damaged or clogged. What it does:

• Channels water or condensate away from components to the appropriate drain or collection area
• Prevents leaks and water pooling caused by cracked, split, or collapsed tubing
• Helps restore normal dispenser/drain operation when original tubing is blocked or deteriorated
• Works as a simple, low-risk part to replace during troubleshooting of water-routing issues

• One replacement tube as shown

• Inspect the existing routing and connections before removal; replace with identical routing to avoid kinks or interference
• Use appropriate clamps or fittings and tighten securely to prevent leaks
• Disconnect power and water supply as applicable before servicing to prevent shock or flooding