Maytag Mfi2570fez07 Refrigerator Parts

This insul-sound deadening pad reduces vibration and noise by dampening panels and components in laundry and kitchen appliances. It's a small adhesive-backed sound/isolation pad used where noise or rattles transfer through metal surfaces. What it does

• Dampens rattles and reduces structure-borne noise from panels, cabinets and housings.
• Helps isolate vibrating components from appliance chassis to lower perceived sound.
• Commonly applied behind control panels, cabinet walls or on motor mounts to cut vibration transmission.
• Useful when worn, detached or hardened factory pads allow increased noise.

• One insul-sound deadening pad

• Disconnect power before servicing an appliance to avoid shock or injury.
• Clean and dry mounting surface; press pad firmly to ensure adhesive contact.
• Replace only in the original location; do not cover vents or moving parts.
• If adhesive is weak, use OEM-approved adhesive; avoid solvents that may damage finishes.

This spring hose clamp secures flexible hoses to fittings to prevent leaks and keep connections tight. It's a simple, durable retaining clip used on water and vent lines to maintain a reliable seal during operation. What it does:

• Holds a hose or duct onto a spud or barb to prevent leaks and disconnection
• Keeps hoses secure against vibration and pressure changes
• Helps stop water leaks or airflow loss caused by loose connections
• Works on flexible rubber or corrugated hoses in laundry and appliance water/vent systems

• Disconnect power and water supply before servicing the appliance.
• Relieve any pressure and drain hoses before removing the old clamp.
• Use appropriate pliers or clamp tool to expand or compress the clamp for removal and installation.
• Test for leaks after reassembly.

This slide tray is the removable drip tray that catches spills and condensation from the refrigerator dispenser, keeping the cabinet floor and shelf area clean and dry. It slides out for quick cleaning and maintenance. What it does:

• Collects drips and overflow from the water/ice dispenser to prevent puddles under the dispenser
• Slides outward for easy access when wiping up spills or removing debris
• Re-seats into the dispenser assembly to maintain proper alignment and coverage
• Helps reduce need for frequent cleanups and keeps the dispenser area sanitary

• Disconnect power and turn off the water supply before servicing dispenser components
• Remove old tray by sliding it out; align new tray and slide in until it clicks or seats firmly
• Use only gentle pressure—do not force or pry parts into place
• If tray doesn't seat correctly, check for obstructions or damaged mounting tabs before operating

The Wiring Harness is an OEM part for Whirlpool refrigerators. It ensures proper connectivity between various parts of the electrical system.

The wiring harness provides a secure and reliable connection for power supply and communication within the refrigerator. It allows for efficient operation of the refrigerator's functions, such as temperature control, ice making, and defrosting.

A bad wiring harness can occur due to factors like wear and tear, accidental damage, or electrical faults. If you notice symptoms such as intermittent power loss, malfunctioning controls, or erratic behavior of the refrigerator, it may be time to replace this part.

Symptoms of a bad wiring harness include:

• Intermittent power loss
• Malfunctioning controls
• Erratic behavior of the refrigerator

Restore your Whirlpool refrigerator by replacing the faulty or damaged wiring harness with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This shelf trim is the replacement trim piece that restores the front edge of a refrigerator shelf or door shelf rail, improving appearance and helping keep items from sliding forward. It provides a clean, finished look and stable edge control. What it does:

• Replaces a cracked, broken or missing front shelf trim that lets items slide or snag
• Restores proper edge containment for stored items and improves shelf appearance
• Prevents small items from shifting off the shelf during door movement
• Matches the original part shape and attachment points for a secure fit

• One shelf trim piece

• Disconnect power to the appliance or ensure the door is secured per the model service guide before starting
• Typically installs by aligning with the shelf/rail and snapping or sliding into the original mounting location
• Inspect mating shelf or rail for damage and clean the area before installing
• If fasteners were used on the original trim, retain and reinstall them; your model's service instructions for details

This fan scroll is the blower housing that directs airflow from the blower motor to the appliance's ducts, helping maintain proper circulation. It replaces a damaged or warped housing to restore efficient airflow and reduce noise. What it does:

• Channels air from the blower motor into the appliance air path for cooling or venting.
• Helps maintain consistent temperatures and airflow for proper operation.
• Can reduce vibration or rubbing noises caused by a cracked or deformed housing.
• Supports the blower motor assembly and seals the motor-to-duct interface.

• One fan scroll / blower housing.

• Disconnect power to the appliance before starting any repair.
• Installation may require removal of the blower motor and nearby panels; handle motor and impeller carefully.
• Inspect and reuse or replace any required mounting hardware, gaskets, or seals as needed—only what explicitly ships is included.
• If you hear unusual noises after installation, recheck alignment and clearance between the impeller and the scroll.

The Midnight Grey Appliance Touchup Paint is an OEM touchup paint that is specifically designed for use with Whirlpool appliances. It is the perfect solution for covering up any scratches, chips, or blemishes on the surface of your appliance, restoring its original appearance. 

Causes of scratches or chips on your appliance's surface can include accidental impacts, wear and tear over time, or mishandling. These imperfections can not only affect the aesthetic appeal of your appliance but also leave it vulnerable to further damage.

Symptoms of a damaged appliance surface include:

• Visible scratches or chips
• Discoloration or uneven appearance
• Exposed metal or other materials

Restore your appliance by using this genuine OEM touchup paint to cover up any imperfections. Simply apply to the affected area and let it dry for a flawless finish.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This replacement handle restores a secure grip and normal door operation on compatible Whirlpool appliances. It's a direct-fit exterior handle that keeps the appliance looking finished and easy to open. What it does

• Replaces a cracked, broken, or missing exterior appliance handle
• Restores a solid grip so doors open and close smoothly
• Helps prevent further wear or damage to the door edge or latch area
• Fits in the same mounting locations as the original for a straightforward swap

• Use proper tools and follow manufacturer instructions for safe removal and installation
• Support the door or panel while removing the old handle to avoid damage or injury
• Keep mounting screws and hardware organized; reuse original screws unless replacements are provided

This shelf cant bracket is a direct-fit support bracket that restores proper shelf positioning and stability in compatible refrigerators. It replaces a broken or worn cant bracket so shelves sit level and stay secured during use. What it does:

• Replaces a damaged or broken shelf cant bracket that lets the shelf tilt or sag
• Supports the shelf edge to keep items stable and prevent sliding or falling
• Commonly used when shelves shift, droop, or no longer lock into place
• Simple replacement that restores original shelf alignment and support

• Disconnect the appliance from power before starting any repair to avoid injury
• Remove the affected shelf according to the owner's manual before replacing the bracket
• Snap or screw the replacement bracket into the shelf rail or frame as required; retain any original fasteners unless the new part includes them