Maytag Mgs6870adq Parts

This door hinge secures and guides the active refrigerator door so it opens and closes smoothly while maintaining proper alignment. Durable replacement hinge restores correct door movement and helps prevent sagging or misalignment. What it does:

• Provides the pivot point and structural support for the active refrigerator door
• Keeps the door aligned for a proper seal and even gaps
• Commonly replaces hinges that cause door sagging, rubbing, or difficulty closing
• Works with the door assembly hardware to maintain smooth operation

• Disconnect power to the appliance and remove food/items from the door before starting.
• Support the door while removing and installing the hinge to prevent injury or damage.
• Reuse original mounting screws; tighten securely but avoid overtightening.
• After installation, check door alignment and adjust as needed for a proper seal.

This stainless-steel trim assembly restores the finished look and protective edge of the appliance fascia. It replaces a damaged, dented, or missing trim piece to help seal and finish the control/vent opening. What it does

• Replaces worn, dented, or scratched trim to restore appliance appearance
• Covers and protects the edge of the fascia or opening from dirt and damage
• Helps keep the control/vent area sealed and neat-looking
• Stops rattles or gaps caused by a loose or missing trim piece

• One stainless-steel trim assembly

• Disconnect power to the appliance before starting any work
• Basic hand tools typically required; remove adjacent panels or fasteners to access the trim
• Handle stainless trim carefully to avoid scratches; use a soft cloth when positioning

This saddle-style gas valve controls gas flow to the appliance, letting technicians create a safe, serviceable gas connection. It's used where a saddle/tap-style inlet is required for supplying natural gas to the unit. What it does:

• Provides a saddle-mounted gas shutoff and inlet for an appliance connection
• Restores gas flow when a damaged or leaking saddle valve prevents operation
• Commonly used when a service replacement or rework of the appliance gas inlet is needed
• Helps isolate the appliance gas supply for repair or maintenance

• Turn off the home gas supply and relieve downstream pressure before starting work
• Installation must follow OEM instructions and local codes; use appropriate fittings and sealants for gas service
• Check all connections for leaks with a gas-safe leak detector or soapy-water test after installation

This Holder ORF retainer secures a small appliance component in place to keep moving parts aligned and reduce noise or misfeeds. It's a simple replacement that restores proper component positioning and stable operation. What it does:

• Secures and centers the associated component so it stays in the correct position during use
• Prevents rattling, shifting, or intermittent contact caused by a loose or broken retainer
• Helps restore consistent operation when an associated part is misaligned or falls out of place
• Works as the mounting/holding point designed for the OEM component it matches

• One Holder ORF retainer

• Disconnect power (and water, if appliance type requires) before replacing the part
• Replace using basic hand tools; avoid forcing or prying plastic parts to prevent breakage
• Inspect adjacent clips and fasteners and replace if damaged to ensure a secure fit

A surface ignitor that produces the spark needed to light gas burners on compatible ranges and cooktops. Replaces a worn or failed ignitor to restore reliable ignition and consistent burner lighting. What it does

• Creates the spark at the burner to ignite gas when the control is turned on.
• Commonly used when burners click but fail to light or when a specific burner never ignites.
• Works with the cooktop's ignition system to provide consistent, repeatable sparking.
• Fits into the burner assembly and connects to the appliance's existing wiring and mounting.

• One surface ignitor (quantity: 1)

• Disconnect power to the appliance and shut off the gas supply before starting any service.
• Handle the ignitor by the ceramic/insulated areas; avoid touching the tip with bare hands to prevent contamination or damage.
• Confirm correct fit and secure all wiring connections; test ignition on a safe flame setting after reinstalling.

This end cap panel is a replacement trim piece that restores the finished edge and protects the appliance cabinet where panels meet. It helps maintain a clean look and keeps edges covered after repair or panel replacement. What it does

• Covers and protects the outer edge of a cabinet or control panel section to prevent exposed edges and wear
• Restores a flush, finished appearance after removing or replacing surrounding panels
• Helps keep dirt and moisture from reaching internal edges and seams
• Matches OEM fit and attachment points for reliable alignment

• One end cap panel

• Designed to snap or screw into existing mounting points — handle gently to avoid cracking plastic
• Turn off and unplug the appliance before removing nearby panels
• Inspect adjacent clips or fasteners and replace if damaged to ensure secure fit
• No special tools typically required; a screwdriver and trim tool may be helpful

This front mounting bracket secures the appliance's front panel and helps keep the cabinet and components aligned for stable operation. A direct-fit replacement that restores proper panel fit and reduces vibration or rattling. What it does

• Secures the front panel or trim to the cabinet to maintain alignment and prevent gaps.
• Keeps adjacent components from shifting, helping reduce vibration and noise.
• Commonly replaces cracked, bent, or missing brackets that cause loose or misaligned panels.
• Helps restore correct door/panel fit and smooth operation of attached controls or trim.

• One front mounting bracket

• Disconnect power (and water if applicable) before starting any repair.
• Access may require removing the front panel or trim—keep screws and fasteners organized.
• Inspect mating surfaces and existing fasteners; replace any damaged screws or clips.

This mounting bracket secures appliance components to the cabinet or chassis, restoring proper alignment and support. Designed to replace damaged or missing brackets, it helps reduce vibration and prevent parts from shifting during use. What it does

• Provides a stable anchor point for internal components or panels
• Restores proper alignment and fit between the appliance cabinet and mounted parts
• Helps reduce vibration and rattling caused by loose or broken supports
• Commonly replaced when bracket is bent, cracked, or missing

• Inspect adjacent fasteners and mounting holes; replace any stripped screws or damaged hardware
• Use appropriate tools and mounting hardware for secure installation; torque to OEM recommendation if available
• Disconnect power before working on electrical appliances and follow all safety guidelines

This orifice spud is the small gas fitting that directs fuel from the range/oven valve to the burner, helping maintain the correct gas flow for stable ignition and consistent flame control. What it does

• Seats in the gas valve or burner assembly to channel gas through the proper orifice
• Restores correct fuel flow when a damaged or clogged spud causes weak or no flame
• Helps correct symptoms like burners that won't light, low or uneven flame, or inconsistent cooking heat
• Works with the existing valve and burner components to re-establish reliable ignition

• One orifice spud

• Turn off the appliance gas supply and disconnect power before starting any work
• Remove grates and burner parts to access the valve/burner area; keep parts organized for reassembly
• Tighten to OEM torque; do not force fittings or overtighten threads

This replacement manifold assembly routes fluid or gas from the supply to the appliance's internal components, restoring proper distribution and operation. Use this genuine-style manifold when the original is cracked or otherwise failing. What it does

• Directs flow from the supply line to multiple component ports so burners, valves, or injectors receive proper flow.
• Restores proper operation when improper flow causes uneven performance or loss of function.
• Common symptom indicators: weak or no output at related components, visible leaks, or inconsistent operation.
• Works as the central distribution point that mates to supply and downstream lines or valves.

• One manifold assembly as shown

• Turn off and disconnect the appliance from power and the supply (gas/water/electric) before starting.
• Inspect associated seals, gaskets, and fittings; replace any worn items to ensure a proper seal.
• Hand-tighten fittings first, then torque per manufacturer spec if available; avoid overtightening.

The LP Orifice is an OEM part for Whirlpool gas ranges. As a calibrated opening, it helps regulate gas flow to the broiler burner, ensuring proper and safe operation.  

Causes of a bad orifice can include mineral or foreign debris deposits that obstruct gas flow or physical damage to the orifice opening.

Symptoms of a bad LP orifice include:  

• Yellow lazy flames or flames that do not fully ignite under the broiler  
• Inefficient or inadequate broiling performance
• Strong gas smell coming from the range

Note: This is a "Male" broil orifice with #100 stamped on it.

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. Proper calibration of gas pressure is critical for safety, so replacement with an exact OEM match is highly recommended.

This left-side slide drawer replaces a worn or damaged refrigerator drawer slide to restore smooth, stable opening and reliable support for the drawer. Designed to match the OEM fit and function for compatible Whirlpool refrigerators. What it does:

• Guides and supports the left refrigerator drawer for even, smooth movement.
• Replaces bent, broken or worn left-side slide assemblies to stop sagging or sticking.
• Reduces rubbing, scraping or catching when opening and closing the drawer.
• Helps restore proper drawer alignment and prevents uneven wear on the drawer edge.

• Disconnect power to the appliance before beginning repairs and remove food/items from the drawer.
• Remove the old slide per the freezer/refrigerator drawer removal steps; retain fasteners if re-using.
• Align the new slide with mounting points and secure with recommended screws; avoid over-tightening.
• Test drawer movement and adjust alignment as needed; stop and reassess if binding occurs.