Maytag Mhw6000xw2 Parts

The Tub Suspension Spring is an OEM part for Whirlpool washers. It is responsible for supporting and stabilizing the washer tub during the wash cycle. This spring ensures proper balance and reduces excessive vibrations and movement of the tub. 

A bad tub suspension spring can occur due to continuous use, heavy loads, or accidental mishandling. If you notice symptoms such as excessive shaking or vibrating during the wash cycle, loud banging noises, the washer moving or "walking" during operation, or leaks due to increased stress on the tub and other components, it may be time to replace the tub suspension spring set.

Symptoms of a bad tub suspension spring include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging noises
• The washer moving or "walking" during operation
• Leaks due to increased stress on the tub and other components

Restore your washer by replacing the faulty or worn-out tub suspension spring with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Inner is an OEM part for Whirlpool washing machines. As an integral component situated behind the outer door panel, this plastic inner shell provides structure and seals the inner workings.

Symptoms of a bad door inner include:

• Excessive vibrations or rattling noises coming from the door area  
• Gaps forming between the inner and outer doors
• Deteriorating or cracked plastic door liners
• Difficulty latching or sealing the door closed

Causes relate to wear over time under repeated pressures of the wash cycle. Mineral deposits also accelerate damage to high-efficiency models. 

This Whirlpool replacement door inner restores a positive seal, quiet operation, and protection from leaks. Compatible with legacy models, it ensures dependable performance for all your laundry needs.

Distribution lever replacement that operates the dispenser/linkage inside the appliance, restoring proper mechanical movement and reliable dispenser operation. Use when the original lever is cracked, worn, or no longer moves freely. What it does:

• Replaces the plastic lever that routes motion within the dispenser/distribution assembly.
• Helps the dispenser or internal linkage open and move correctly during cycles.
• Common symptoms: dispenser won't open, linkage binds or hangs, or inconsistent dispensing.
• Works with the existing mounting points and clips in the dispenser assembly.

• Disconnect power (unplug or shut off breaker) and water supply before starting any work.
• Remove the dispenser or access panel to reach the lever; take care with plastic clips and tabs—do not force them.
• Inspect and replace any worn clips, springs, or adjoining parts to ensure proper function.
• Test dispenser operation through a short cycle before reassembling panels.

This replacement refrigerator water filter cartridge helps restore clear-tasting drinking water and ice by filtering particulate matter and common taste/odor causes. Designed to fit compatible Whirlpool refrigeration systems for reliable in-line filtration. What it does:

• Filters sediment and particulates to improve water clarity
• Reduces common taste and odor issues associated with aging filters
• Helps maintain ice quality by filtering water used for ice production
• Addresses symptoms like reduced water taste, cloudy ice, or off-odors

• Shut off water supply and relieve line pressure before removing the old filter
• Remove old cartridge per manufacturer instructions and insert the new filter until it seats securely
• Flush water lines and dispense water until it runs clear before use
• If you notice leaks or poor fit, re-seat the cartridge and check the filter housing for damage

This is the pull-out dispenser drawer assembly for a washer. It holds and channels laundry products into the dispenser housing so each additive is released at the right time, restoring smooth operation and proper dispensing. What it does:

• Holds detergent and additives and directs them into the wash at the correct stage
• Restores smooth open/close action of a worn or broken drawer
• Helps resolve issues like detergent remaining in the drawer after a cycle
• Addresses leaks or drips from a cracked or warped dispenser drawer

• 1 dispenser drawer assembly

• Unplug the washer and turn off water supply before servicing
• Pull the old drawer out; depress the locking tab(s) to remove
• Transfer any reusable inserts/caps from the original drawer if applicable
• Slide the new drawer into the rails until it clicks; run a quick cycle to check for proper dispensing and leaks

This nozzle directs and focuses water flow inside the dishwasher so dishes get a thorough rinse. Replaces a worn, cracked, or clogged nozzle to restore spray coverage and help prevent poor cleaning performance. What it does

• Channels water from the spray arm or manifold to create a targeted spray pattern
• Helps maintain even water distribution across racks for better cleaning
• Clogs, cracks, or damage can cause weak spray or spotty wash results
• Compatible with systems that use a snap- or press-fit nozzle on the spray assembly

• Disconnect power and water supply before starting any repair
• Remove the spray arm or access panel as needed to reach the nozzle
• Inspect mating surfaces for debris; press or snap the new nozzle into place until seated