Mdbs561aww-Maytag Parts

This vent seal fits at the appliance control panel to block gaps and stop drafts, helping keep lint, dust and moisture out of the control area for cleaner operation and improved safety. What it does

• Seals the gap between the control panel and cabinet to prevent air leakage and drafts.
• Helps keep lint, dust and moisture out of electrical and control components.
• Can reduce visible airflow or draft coming from the control area.
• Useful when a worn or damaged seal allows debris or excess air into the control cavity.

• One vent seal for the control panel.

• Disconnect power to the appliance before starting any repair.
• Remove the control panel per OEM instructions to access and replace the seal.
• Ensure the mating surfaces are clean and dry; press the seal into place for proper fit.
• If any fasteners or clips are damaged, replace them; do not force a misfitting seal.

This toe-panel insulation replaces the foam liner behind the appliance toe kick to help maintain cabinet insulation and reduce drafts. It restores proper airflow and thermal protection under the unit for more consistent operation. What it does:

• Provides thermal insulation for the cabinet base to help reduce heat loss and drafts
• Helps maintain proper airflow around the compressor and components beneath the appliance
• Can reduce the likelihood of cold floors or localized temperature changes near the toe kick
• Restores damaged or missing insulation that may affect efficiency or appliance comfort

• Disconnect power to the appliance before beginning service
• Remove the toe kick/grille and old insulation to access the cavity; handle metal edges with care
• Trim or fit the new insulation as needed for a snug placement; use OEM fasteners if originally present

This flexible injector hose routes liquid between the appliance's injector/dispenser and the pump or spray assembly, restoring proper dispensing and preventing leaks. It's a direct-replacement service part for affected injector connections. What it does

• Carries water or detergent solution from the injector/dispenser to the pump or spray assembly
• Restores normal dispensing when the original hose is cracked, split, or clogged
• Prevents leaks that can cause puddling or improper wash cycles
• Helps restore consistent flow so detergent and rinse/cleaning agents reach the tub

• One injector hose

• Disconnect power and shut off the water supply before starting
• Remove the old hose and reuse or replace any clamps or fittings as needed; install the new hose onto the same connection points
• After installation, restore power/water and run a short cycle to check for leaks and correct dispensing

Includes 6` Stainless Steel Braided Hose, Power cord & Connectors

This is a machine screw used to secure appliance panels and components where an 8-32 thread fastener is specified. It provides a reliable hold for control panels, brackets, and interior assemblies. What it does:

• Fastens panels, brackets, and small components to the appliance chassis
• Holds control assemblies and trim pieces in place
• Maintains secure connections that prevent vibration-related loosening
• Works where an 8-32 coarse-thread machine screw of short length is required

• One 8-32 x 3/8" machine screw

• Use the correct driver (Phillips or slotted) to avoid stripping the head
• Thread into metal or nut/insert; do not overtighten to prevent thread damage
• Disconnect power and remove any panels as required for safe access

Right hand side

Color: light blue. Measures about 1 inch high by 4 inches deep.

This replacement silverware basket holds forks, knives and spoons in the dishwasher lower rack so utensils stay upright and separate for better cleaning and easier unloading. It's a direct-fit interior basket designed to restore secure utensil loading. What it does:

• Keeps silverware and small utensils contained so pieces don't fall through or block the spray arms
• Separates items to improve water flow and cleaning coverage
• Prevents loose utensils from banging and potentially damaging dishes
• Replaces cracked, broken, or missing baskets that allow utensils to shift during the cycle

• Drop into the lower rack — no tools required for typical swap-out
• Position basket so it sits flat and does not interfere with rack movement or spray arm rotation
• Avoid overloading; place sharp utensils point-down or bundle separately to reduce hazard when unloading
• For appliance repairs beyond simple replacement, disconnect power and water before servicing

This control board housing secures and protects the washer's electronic control board, keeping circuitry stable and shielded from moisture and debris for reliable operation. It fits into the console area and supports proper control panel alignment. What it does:

• Holds and protects the electronic control board inside the console from impact, dust and moisture.
• Keeps the control board properly positioned for reliable electrical connections.
• Helps prevent control panel wobble or misalignment that can cause button or dial issues.
• Commonly replaced when housing is cracked, broken mounting tabs fail, or board access is needed.

• 1 control board housing

• Disconnect power and water to the appliance before beginning any repair.
• Handle the control board and housing carefully to avoid damage to connectors or circuit components.
• Use appropriate tools to remove console components; replace damaged mounting tabs and secure all fasteners.
• Discharge any capacitors and follow the board manufacturer's ESD/safety recommendations.

This manifold mounting bracket secures the gas manifold assembly to the appliance frame, keeping fuel lines and related components aligned for reliable operation. It's a direct-fit replacement that restores proper manifold support. What it does:

• Holds the gas manifold in the correct position to prevent strain on connections and lines
• Helps maintain stable alignment of valves and supply tubing to reduce leaks and intermittent flow
• Addresses symptoms like a loose or rattling manifold assembly or visible bracket damage
• Restores proper mounting after impact or corrosion-related bracket failure

• One manifold mounting bracket

• Install only with the appliance powered off and gas supply completely shut; follow local codes
• Match bracket orientation to the original and secure with manufacturer-specified fasteners
• Inspect nearby tubing, fittings and valve mounts for damage when replacing the bracket