Medb0yw0 Parts

Replace a cracked or missing bracket to keep appliance components securely mounted and aligned. Restoring this support helps prevent movement, vibration, and premature wear, so the connected part operates as intended.

• Provides a rigid mounting point for an associated component or assembly
• Maintains correct alignment and spacing within the appliance
• Helps reduce vibration, rattling, or shifting during operation
• Replaces brackets that are cracked, bent, or broken
• Common signs: loose or wobbly parts, misalignment, rattling noises, or visible bracket damage

• Disconnect power; also shut off the water supply before servicing
• Wear cut-resistant gloves—bracket edges can be sharp
• Reuse original screws/clips unless replacements are specified
• Hand-start fasteners, align parts, and tighten evenly without overtightening

This axial motor assembly drives a cooling fan to move air through the appliance, helping protect internal components from heat. Replacing a worn or noisy unit restores ventilation and reduces heat-related shutdowns or performance issues.

• Circulates air across heat-generating parts to dissipate heat
• Helps maintain stable operating temperature and protect electronics
• Failure signs can include the fan not running, intermittent operation, loud or grinding noise, overheating, or a burning smell
• Inadequate airflow may trigger thermal cutoffs or nuisance shutdowns

• Disconnect power before servicing; allow hot components to cool
• Access the motor location and note wire positions; take photos for reference
• Transfer any brackets or grommets from the old unit if required; keep wiring clear of the fan path
• After mounting, hand-spin the fan to ensure free movement before restoring power and checking airflow

The Door is an OEM replacement part for Whirlpool electric and gas dryers. Designed to provide controlled access to the drying drum interior, it is also fitted with view glass for visibility into the tumbling load.

Causes of a bad door can be wear and tear of moving components over repeated cycles, damage allowing air leakage, or blockages inhibiting proper operation. 

Symptoms include:

• Loose, sagging, or misaligned door positioning  
• Inability to open or close smoothly
• Air leaks reduce drying efficiency
• Faulty door switches disrupting dryer run times  

This OEM Whirlpool replacement door is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore brand electric and gas dryers.

This replacement air duct channels and directs airflow inside the appliance to help maintain balanced temperatures. Replacing a cracked, warped, or missing duct restores proper air circulation and helps the unit cool more consistently. What it does

• Routes air through internal passages between compartments
• Helps maintain consistent temperatures by preventing leaks and bypasses
• Restores designed airflow when the original duct is damaged or missing
• Common symptoms include uneven cooling, warm spots, frost or moisture buildup, or unusual airflow noise

• 1 air duct

• Disconnect power before servicing; wear cut-resistant gloves around sharp panels
• Remove shelves/panels as needed to access the duct and retain all fasteners
• Transfer any foam seals or gaskets from the original part
• Ensure the duct seats fully and fasteners are snug to prevent air leaks

Replacement door assembly for Whirlpool appliances that restores proper closure and appearance. This direct-fit part replaces a damaged or dented door so the appliance seals and closes correctly. What it does:

• Replaces a cracked, dented, or damaged door to restore the appliance's exterior and function.
• Helps ensure the door latches and aligns correctly to prevent leaks or loss of temperature.
• Restores the door surface and trim for improved appearance and user access.
• Reduces noise or rubbing caused by a misshapen or warped door.

• Disconnect power (and gas if applicable) before starting any work.
• Follow the appliance's service manual or wiring diagram for removal and reassembly steps.
• Use proper tools and, if needed, a second person to handle larger or heavier doors safely.
• Handle glass or trim carefully to avoid damage or injury; wear gloves and eye protection.

Flat metal washer that helps secure fasteners and evenly distribute load on mounting points. Replacing a worn or corroded washer restores proper fastener grip, reduces vibration, and stops loose or rattling parts. What it does:

• Provides a smooth bearing surface for nuts and bolts, preventing pull-through and damage
• Distributes clamping force to protect mounting surfaces and maintain alignment
• Helps reduce vibration and noise from loose or worn fasteners
• Replace when bent, corroded, cracked, or missing to restore secure mounting

• Always disconnect power to the appliance before beginning repairs; follow all safety precautions
• Use the correct size fastener and torque to avoid over-tightening or crushing the washer
• Inspect surrounding hardware and replace any damaged or corroded bolts, nuts, or brackets

This bulkhead is the front tub bulkhead that channels water between the dishwasher tub and control/door area, helping maintain proper flow and prevent leaks. It replaces a cracked or warped front bulkhead to restore sealing and alignment. What it does:

• Forms the sealed interface between the tub and door/control area to prevent water leakage
• Directs water flow from the tub toward the drain and pump assembly
• Restores proper fit and alignment when the original bulkhead is cracked, warped, or damaged
• Helps maintain wash performance by preserving the dishwasher's internal water path

• 1 bulkhead assembly (single piece as shown)

• Disconnect power and water supply before starting any repair
• Remove the dishwasher door and inner components as needed to access and replace the bulkhead
• Inspect adjoining gaskets, seals, and mounting hardware; replace any damaged parts to ensure a watertight fit

This electronic control board manages the appliance's user interface and cycle operations so your appliance runs the selected programs and responds to controls. Replacing a faulty board restores reliable control and display functions. What it does:

• Controls and sequences cycles, timers and user commands for normal operation
• Manages display and button/knob inputs so selections register correctly
• Helps coordinate power to motors, valves and heating elements as designed
• Common symptom: appliance is unresponsive, displays errors, or cycles incorrectly

• 1 electronic control board

• Disconnect power before starting any repair to avoid shock or injury
• Handle the board carefully; avoid static discharge and contact with connectors
• Keep screws and mounting hardware for reinstallation; align connectors fully before securing
• Test appliance after reconnecting power and reassembling panels

This elbow redirects a fluid or air line inside the appliance to allow routing around components and tight spaces. It restores proper flow path and helps stop leaks or blockages when the original elbow is cracked or worn. What it does:

• Provides a sealed change of direction for a water, drain, or vent line inside the appliance
• Replaces a cracked or broken elbow that can cause leaks, water pooling, or reduced flow
• Re-establishes the correct routing to prevent kinks and stress on connected hoses or tubing
• Helps eliminate intermittent draining or venting issues caused by a damaged fitting

• Disconnect power and shut off water supply before accessing the part
• Verify orientation and routing before removing the old elbow to ensure correct reinstallation
• Inspect and replace any worn clamps, gaskets, or hoses when installing the new elbow
• Tighten fittings to secure but avoid over-tightening which can crack plastic components

A replacement mounting screw to secure appliance panels and components so parts stay properly fastened during normal use. Small but essential hardware for stable, rattle-free operation and reliable repairs. What it does:

• Fastens panels, brackets or components to the appliance chassis
• Prevents loose panels, vibration noise, or parts shifting during operation
• Used when original screw is lost, damaged, or stripped
• Restores proper fit and alignment after disassembly for service

• Disconnect power and water before starting any repair
• Use the correct screw type and length; do not force or substitute oversized fasteners
• Tighten until snug—avoid overtightening to prevent stripped threads or cracked parts
• Keep small parts away from children and pets

This front axial bulkhead is the front support assembly that centers the dryer drum and provides a mounting surface for the front bearing and seal. It restores proper drum alignment and helps reduce noise and rubbing. What it does:

• Supports and centers the dryer drum at the front to maintain smooth rotation
• Houses the front bearing/seal interface to prevent rubbing and reduce vibration
• Stops or reduces scraping, grinding, wobbling, or uneven drum movement
• Restores proper drum alignment when the original bulkhead is cracked, warped, or worn

• Disconnect power (and gas, if applicable) before starting any repair
• Remove the dryer front panel and drum to access bulkhead mounting fasteners
• Inspect and replace any associated bearings, seals, or mounting hardware as needed
• Reassemble carefully and test on a short cycle to ensure drum spins smoothly and quietly