Medv800vq0 Parts

Replacement bulkhead that supports the front of the dryer drum and helps maintain correct drum alignment and airflow. Restores stable drum rotation and reduces rubbing, noise, and air leaks for more reliable drying performance. What it does:

• Supports the front of the dryer drum and provides a mounting point for the front drum seal/bearing.
• Helps maintain proper drum alignment to prevent rubbing, wobbling, or uneven wear.
• Seals the front of the cabinet to help direct airflow through the drum and vent system.
• Commonly replaced when customers experience loud rubbing noises, visible drum misalignment, or air leaks from the front of the dryer.

• Turn off and disconnect electrical power and shut off gas supply before servicing.
• Installation typically requires removing the dryer front panel and drum; have the correct tools available and work on a flat surface.
• Inspect seals, bearing, and mounting hardware while replacing the bulkhead and replace any worn components.

Replacement drum baffle that lifts and tumbles clothes inside the dryer for more even drying and helps prevent garments from snagging. Restores proper drum agitation to reduce noise and improve drying performance. What it does:

• Lifts and separates clothes as the drum turns to promote even heat exposure and drying.
• Helps keep items from bunching or wrapping around the drum, which can cause uneven drying.
• Reduces rattling, thumping, or scraping noises tied to a loose or damaged lifter.
• Protects fabrics from snagging or rubbing against the drum surface.

• Disconnect power to the appliance before beginning service to avoid shock or injury.
• Access may require removing the dryer front panel or drum.
• Keep fasteners and mounting tabs aligned during reassembly to ensure the baffle seats correctly.

This is the appliance's cabinet top panel in a chrome finish. It replaces a dented, bent, or rusted top to restore a clean appearance and a secure fit while protecting internal components and supporting mounted parts.

• Forms the finished top surface of the cabinet (chrome finish)
• Shields internal components from debris and accidental contact
• Provides mounting/support points for the console, hinges, or brackets (varies by model)
• Addresses damage, corrosion, looseness, or rattling from a bent or missing top

• Disconnect power before servicing; wear cut-resistant gloves (sheet-metal edges are sharp)
• Retain and reuse the original screws/clips; transfer any brackets from the old panel
• Fasteners are typically at the rear or beneath the console—support the panel, remove screws, then lift off
• Align the new panel and tighten fasteners evenly to ensure a secure, rattle-free fit

This fan blower wheel circulates air inside the appliance to help maintain even temperatures and proper cooling. Replacing a worn or broken fan restores airflow and helps the appliance reach set temperatures consistently. What it does:

• Moves air through the evaporator/condenser area to support cooling and defrost cycles
• Helps prevent hot or cold spots by circulating conditioned air
• Commonly related to reduced cooling, noisy operation, or no airflow from the vents
• Can be a root cause of frost buildup or temperature fluctuations when failed

• Disconnect power before starting any repair to avoid electrical shock
• Access may require removing interior panels or the evaporator/condenser cover
• Inspect the mounting and motor for wear; replace the fan only if it matches the OEM shape and fit

This motor connector housing is the molded body that holds the motor's wire terminals for a secure, insulated connection. Replacing a cracked or heat-damaged housing helps restore reliable motor operation and prevent intermittent power issues.

• Organizes and insulates the motor's wiring terminals
• Locks the harness to the motor for a firm electrical connection
• Helps reduce loose contacts, arcing, and heat damage at the plug
• If the housing is failing, you may see intermittent or no motor operation, the machine stopping mid-cycle, or visible melting/discoloration at the motor connector

• Disconnect power; also shut off gas supply
• Note wire positions; transfer terminals into the new housing one at a time to maintain orientation
• Inspect terminals and wiring; replace any burnt or loose terminals before reassembly
• Ensure the connector seats fully on the motor and the harness is secure; restore power and test

For mating terminal use [AP31136300].

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

Replacement bumper that cushions appliance parts and absorbs shock to prevent rubbing, rattling and surface damage. Restores proper fit and quieter operation for components that contact cabinets, doors or panels. What it does:

• Cushions contact points to reduce noise from doors, drawers or panels.
• Prevents metal-to-metal or metal-to-surface scraping that can cause wear or cosmetic damage.
• Helps components close and seat more evenly to reduce vibration and movement.
• Common symptom fixes: eliminates rattling, stops rubbing noises, and prevents chipping or scuffing where parts meet.

• One bumper.

• High-level, tool-light replacement; usually presses into or adheres to the mounting surface.
• Disconnect power or unplug the appliance before opening panels where required.
• Inspect surrounding clips/retainers and clean the mounting area for best adhesion or fit.

This air duct directs airflow inside the appliance to help maintain proper ventilation and cooling. Replacing a damaged duct restores correct air movement and can reduce noise or uneven temperature issues. What it does:

• Channels warm or cool air through the appliance's ventilation path
• Prevents air leaks that can cause unusual noises or reduced performance
• Helps maintain consistent internal temperatures and component cooling
• Supports connected seals and ducts to ensure efficient airflow

• Disconnect power before servicing to avoid shock or injury
• Inspect surrounding seals and fasteners; replace any that are worn or broken
• Handle carefully to avoid cracking plastic tabs during removal/installation

A replacement grounded-heat safety label that restores the appliance's original heat/grounding marking so important safety information remains visible. Ideal when the original label is torn, faded, or missing. What it does:

• Replaces a damaged or missing grounded-heat safety label so warnings and grounding info are readable.
• Identifies heat/grounding points and cautions about hot surfaces to help owners stay safe.
• Helps maintain the appliance's original safety markings needed for proper service and inspection.
• Adhesive-backed label designed to be applied to the appliance at the OEM-specified location.

• Clean and dry the surface thoroughly before applying to ensure proper adhesion.
• Peel backing and press the label firmly into place; avoid stretching or folding.
• Install in the OEM specified location; refer to the appliance diagram for exact placement.
• Disconnect power before servicing the appliance to access the label area safely.

This replacement fan restores airflow inside the appliance to support proper cooling and ventilation. It's a direct-fit component designed to move air where the original fan did the work, helping maintain performance and prevent overheating. What it does:

• Circulates air for cooling or ventilation so components run within intended temperature ranges
• Replaces worn or damaged fan blades that cause reduced airflow
• Stops or reduces unusual grinding, rattling, or vibration linked to a failing fan
• Helps prevent heat build-up that can lead to thermal shutdowns or reduced efficiency

• One replacement fan

• Disconnect power (unplug or shut off breaker) before starting any repair
• Access may require removing panels or moving other components; keep fasteners organized
• Inspect the fan housing and motor mounts during install; replace damaged clips or screws

Replacement refrigerator glass shelf that restores stable, easy-to-clean storage inside your fridge. Replaces a cracked, chipped or missing shelf so you can safely store food and containers while keeping the interior organized. What it does

• Provides a flat, durable surface for storing food, containers and small appliances.
• Replaces shelves that are cracked, chipped, broken or missing.
• Helps contain spills and makes cleanup faster with a smooth, wipeable surface.
• Fits into existing shelf rails/grooves to restore usable storage space.

• Unplug the appliance or disconnect power before installing and remove all items from the shelf area.
• Lift out the old shelf by sliding it out of the support grooves; position the new shelf into the same rails until it seats securely.
• Handle glass carefully — wear cut-resistant gloves and place the shelf on a padded surface during installation.
• If shelf supports, clips or rails are damaged, replace them before use and follow the appliance manufacturer's instructions.

User interface control panel that provides the buttons and display used to select cycles and view appliance status. Replaces a faulty control panel to restore responsive controls and clear cycle/status feedback. What it does:

• Registers user input from the touchpad/buttons; may fail if buttons are unresponsive or intermittent.
• Displays cycle progress and status indicators; can show blank, garbled, or missing segments when faulty.
• Sends user commands to the appliance control system; failure can prevent cycles from starting or changing.
• Common symptom linkage: unresponsive controls, no display, incorrect cycle selection, or persistent status/errors.

• Always disconnect power (unplug or shut off breaker) before servicing the appliance.
• Handle the display/overlay and ribbon/wire connectors carefully to avoid damage.
• Remove and replace the console using correct fasteners; ensure all connectors are fully seated.

The Valve is an OEM part for Whirlpool dryers. It is responsible for controlling the flow of water into the dryer's steam generator, enabling the steam function during the drying cycle.

A bad steam water inlet valve can occur due to wear and tear, sediment buildup, or malfunctioning internal components. If you notice symptoms such as no steam being produced during the drying cycle, insufficient steam generation, or water leakage around the valve, it may be time to replace this part.

Symptoms of a bad valve include:

• No steam being produced during the drying cycle
• Insufficient steam generation
• Water leakage around the valve

Repair your dryer by replacing the faulty or damaged steam water inlet valve with this genuine OEM part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Control Board is an OEM part for Whirlpool dryers. As the central processing unit, it monitors and regulates all electrical functions to ensure customized drying cycles are achieved based on user settings. Temperature, spin speed, sensor inputs, timed durations, and heating elements are all controlled by the precise circuitry within the control board.

Causes of a bad control board can include natural wear of electronic components due to constant usage over many years. Water damage from leaks is also a common cause of failure, as moisture can disrupt circuit paths. Control boards rarely fail due to external impact or physical stress.

Symptoms of a bad control board include:

• Dryer not heating or spinning properly   
• Fault codes displayed  
• Buttons/settings non-responsive
• Premature ending of cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This socket is an electrical connector used to join wiring or plug-in components, restoring a secure connection for reliable appliance operation. It replaces a worn or damaged socket to help prevent intermittent power or component failure. What it does:

• Provides a secure electrical connection between wiring and the appliance component
• Restores proper contact when a loose, corroded, or broken socket causes intermittent operation
• Helps prevent arcing or poor connections that can lead to component failure
• Used where a plug-in or push-fit electrical connection is required

• One socket

• Disconnect power to the appliance before inspecting or replacing the socket
• Replace only with the exact socket type specified for your appliance