Mfi2296vem3 Parts

A straight replacement support rod used to secure or guide moving components in compatible laundry and kitchen appliances. Replaces a worn, bent, or broken rod to restore proper alignment and part movement. What it does:

• Provides structural support or alignment for linked components that rely on a straight mounting or guide pin.
• Restores smooth operation when the original rod is bent, broken, or missing.
• Helps eliminate binding, misalignment, or abnormal movement caused by a damaged rod.
• Works as a direct-fit replacement when the OEM part number matches your appliance.

• One replacement support rod (quantity: 1)

• Inspect surrounding brackets, clips, and fasteners for damage and replace if needed; rod ships alone.
• Turn off and unplug the appliance before attempting any repairs to avoid electrical shock or injury.
• Use basic hand tools; some disassembly may be required to access and remove the old rod.

This wire harness assembly routes power and signals between a range of appliance control and its components, restoring reliable electrical connections for proper operation. It replaces a damaged or worn harness to help eliminate intermittent or failed component function. What it does:

• Carries power and control signals between the control board and components
• Restores lost or intermittent electrical connections that can cause components to stop working
• Common symptom fixes: intermittent operation, components not powering on, or error conditions related to wiring
• Used where multiple connector plugs and bundled wires are required for safe operation

• Disconnect power (unplug or shut off breaker) before starting any repair
• Route harness along original wire paths and secure with existing clips or fasteners
• Match connector shapes and colors; ensure connectors are fully seated and latched

This Arm-shut is the OEM shut arm that secures and guides the appliance door so it closes and latches correctly, helping the unit operate safely and reliably. It restores proper door movement and engagement when the original arm is worn or damaged. What it does:

• Guides and supports the door during opening and closing so the latch can engage
• Holds the door in the closed position for normal operation
• Prevents door misalignment that can cause leaks, error codes, or failure to start
• Replaces a bent, broken, or worn shut arm that interferes with proper door closure

• One Arm-shut

• Disconnect power (and water if applicable) before starting any repair
• Basic hand tools required; follow the appliance service manual for disassembly
• Inspect surrounding hinge, latch, and strike for wear and alignment and replace if needed

This trim is a decorative replacement panel that restores the finished appearance of the appliance and helps protect the underlying edge from dirt and wear. Replaces a worn or damaged trim to improve fit and finish. What it does:

• Covers and protects the appliance edge or opening where installed
• Restores the exterior appearance after damage, chips, or scratching
• Helps keep debris and moisture away from the exposed edge
• Useful when gap, misalignment, or visible damage affects the appliance look

• Inspect mounting tabs and fasteners before installing; replace any broken hardware
• Install with the appliance powered off and panels cool; disconnect power if working near electrical components
• Align trim carefully to avoid cracking; secure with original fasteners or manufacturer-recommended hardware
• If the trim requires adhesive or clips, use only OEM-recommended parts and methods

This evaporator clip secures the refrigerator evaporator assembly and related components so the cooling system stays aligned and vibration-free. It helps maintain proper airflow and prevents rubbing or loose parts. What it does:

• Holds the evaporator coil/assembly or associated covers in place
• Prevents vibration, noise, and contact between the coil and cabinet parts
• Helps maintain consistent airflow for reliable cooling performance
• Commonly linked to rattling, buzzing, or loose parts around the freezer evaporator

• Disconnect power before servicing the appliance
• Handle evaporator and surrounding fins carefully; they are sharp and fragile
• Verify clip orientation against the OEM diagram before fastening

The Icemaker Fill Cup is an OEM part for Whirlpool bottom-mount and side-by-side refrigerators. Located inside the icemaker assembly, the fill cup sensor works to automatically detect when an ice scoop or bucket is in place below the icemaker chute. It signals the icemaker to drop ice cubes into the receptacle below.

Causes of a bad fill cup sensor can include mineral or dirt build-up inhibiting sensor response, moisture damage to its electronic functioning, or physical damage to the sensor head.

Symptoms of a bad fill cup sensor include:

• Ice failing to dispense or drop when a container is in place
• Ice clumping in the chute instead of dispensing properly  
• The icemaker continuing to run even with ice present below
• Inability to sense when ice is removed from the bucket

This OEM Whirlpool replacement fill cup sensor is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore bottom-mount and side-by-side refrigerators. 

This replacement housing is the outer cabinet component that supports and protects internal appliance parts, restoring proper alignment and preventing debris intrusion. It's a direct-fit service piece when the original housing is cracked, bent, or damaged. What it does:

• Replaces a damaged or cracked outer housing to restore structural support
• Protects internal components from dirt, moisture, and impact
• Reduces vibration and rattling caused by warped or broken housing
• Helps maintain correct alignment of internal assemblies for reliable operation

• One replacement housing

• Disconnect power (and water if applicable) before starting any repair
• Handle edges carefully — use gloves to protect against sharp metal or plastic
• Follow OEM instructions for removal and reassembly; fasteners and trim may be required

This trim piece replaces a worn or damaged decorative trim to restore the appliance's finished appearance and cover edge gaps. It provides a clean, factory-style look so doors and panels sit flush and look complete. What it does:

• Covers and finishes an exposed edge or seam for a neater appearance
• Restores a factory look after panel or door service
• Helps prevent small items from catching on an unfinished edge
• Useful when the original trim is cracked, dented, or missing

• One trim piece

• Designed to snap or fasten into place; verify orientation before seating
• Turn off and unplug the appliance before removing panels or trim to avoid injury
• Retain all mounting hardware; replace hardware only if specified