Mgd7230hw-B Parts

The Riser is an OEM part for GE electric dryers. It is a vertical stand located at the rear of the dryer that elevates the appliance for proper airflow and venting. The riser ensures the dryer exhaust can efficiently exit out the back of the machine.

Causes of a bad riser can include cracks or breaks developing from the repeated lifting of the dryer for cleaning or maintenance. Over time, normal usage and weight of the dryer can also cause weakening. 

Symptoms of a bad riser include:

• Inability to safely lift or tilt the dryer for cleaning  
• Potential for exhaust vent blockage issues
• Increased risk of accidental tipping if riser stability is compromised
• Difficulty leveling the dryer which impacts the operation

Compatible models also include some Hotpoint, RCA, and select Kenmore dryers manufactured for Sears. Replace yours now for safe and reliable operation.
 

This replacement top panel restores the appliance's outer cabinet for a clean appearance and to protect internal components from dust and debris. It fits above the main cabinet and provides the finished surface beneath controls. What it does:

• Covers and protects internal parts and wiring from exposure and contaminants
• Restores a smooth, finished surface for the appliance cabinet
• Helps maintain proper spacing and alignment for control components
• Replaces a bent, dented, or corroded top that can trap dirt or allow moisture in

• Disconnect power to the appliance before beginning any work.
• Installation may require removing the control console or back panel to access mounting screws.
• Handle edges carefully — replacement panels can have sharp edges.
• Follow the manufacturer's service instructions for fastening sequence and torque.

This 5-foot flexible vent hose provides a replacement vent path for your dryer, restoring proper airflow to help clothes dry efficiently and reduce lint buildup. It's a straight, flexible vent designed for inline dryer ducting. What it does:

• Channels hot, moist air from the dryer to the home vent outlet to help shorten drying cycles
• Helps prevent lint accumulation in the dryer exhaust path when properly installed and maintained
• Can resolve symptoms like longer dry times, reduced airflow from the dryer, or overheating due to restricted venting
• Works as the inline connector between the dryer outlet and the household vent opening

• One 5 ft flexible dryer vent hose

• Disconnect power (and gas supply for gas dryers) before replacing the vent; follow all safety precautions
• Ensure the hose is not crushed or kinked and has a smooth path to the exterior vent for best performance
• Use proper clamps or fasteners to secure both ends and check for leaks after installation
• Clean lint from the dryer and duct before installing the new hose to maximize airflow

This finished burner funnel directs gas and air into the burner for correct flame shape and ignition. It replaces a damaged or corroded funnel to help restore even heating and reliable burner performance. What it does:

• Channels gas and air into the burner for proper mixing and flame distribution
• Helps maintain even flame across the burner for consistent cooking heat
• Can reduce ignition delays or uneven flames caused by a damaged funnel
• Works with the burner assembly; not a standalone gas valve or igniter

• Turn off gas supply and electricity to the appliance before servicing
• Replace only with the correct funnel for your burner; follow OEM diagram for orientation
• Tighten fittings by hand-first, then snug—do not overtighten; inspect for leaks after reassembly

This replacement name plate restores the appliance's identification label so model and serial information is legible and the exterior looks complete. It's a simple cosmetic and identification part that helps owners read key appliance info. What it does

• Replaces a faded, damaged, or missing identification label
• Restores readable model/serial/manufacturer details for service and registration
• Improves cosmetic appearance where the original label is worn or peeled
• Helps prevent confusion when ordering parts or scheduling repairs

• One replacement name plate

• Clean and dry the mounting surface thoroughly before installing
• Align carefully and press firmly if adhesive-backed; use the original fasteners if applicable
• Handle by the edges to avoid transferring oils or smudges to the label

This dryer elbow is the molded duct connector that redirects exhaust from the dryer to the vent duct, helping restore proper airflow and reduce leaks around the outlet. It's a simple replacement for a cracked or loose elbow. What it does:

• Connects the dryer's exhaust outlet to the home vent duct to direct hot, moist air outside
• Replaces cracked, broken, or warped elbows that cause air leaks or rattling
• Helps reduce lint escape and improves exhaust path integrity when fitted properly
• Can eliminate visible gaps or misalignment at the dryer outlet

• One dryer elbow part

• Disconnect power (and gas supply for gas dryers) before servicing; follow all safety warnings
• Remove the dryer from the wall enough to access the outlet; loosen or remove clamps to swap the elbow
• Use appropriate duct clamps or approved tape to secure connections; ensure vent is clear of lint

This touch-up paint bottle restores small chips and scratches on painted appliance surfaces to improve appearance and help protect against rust. Easy-to-apply formula matches common appliance finishes for quick cosmetic repairs. What it does:

• Covers small chips, nicks and surface scratches to improve appearance
• Helps protect exposed metal from moisture and surface corrosion after damage
• Provides a precise application for targeted repairs on doors, panels and trim
• Can be used on painted steel and metal appliance surfaces (test in an inconspicuous area first)

• Clean and dry the repair area; remove loose paint and corrosion before applying
• Shake bottle well and apply sparingly with included applicator or a small brush
• Allow adequate drying time between coats and follow any manufacturer cure instructions on the label
• Wear gloves and work in a well-ventilated area; keep away from open flame and out of reach of children

This dryer vent directs exhaust air from the dryer to the home's venting system to restore proper airflow and help maintain safe drying performance. Use when the original vent is damaged, bent, or missing. What it does:

• Channels hot, moist air from the dryer to the exterior vent to prevent backflow into the laundry area
• Restores proper airflow that can reduce long drying cycles and excess heat buildup
• Helps keep lint and moisture moving out of the cabinet area when used with regular lint-trap maintenance
• Replaces cracked, crushed, or corroded vent parts that cause poor venting

• Disconnect electrical power (and shut off gas supply for gas dryers) before starting any work
• Install only with the correct vent length and profile for your dryer; avoid sharp bends and compressing the duct
• Secure connections with appropriate clamps or fasteners and check for leaks or obstructions after installation
• Clean the lint trap and inspect the vent path regularly to maintain safe operation

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

(18"- 29")

Approximately 8 feet.

This water inlet valve controls incoming water flow to the appliance, restoring proper supply to the ice maker or dispenser. Replacing a faulty valve helps stop leaks, restore water delivery, and prevent continuous filling. What it does:

• Opens and closes to allow water into the appliance when the dispenser or ice maker calls for it
• Stops water flow when the dispenser or ice maker is idle, preventing overfilling or leaks
• Commonly linked to symptoms like no water from the dispenser, no ice production, or continuous/slow filling
• Works with the appliance's electrical solenoids to regulate water delivery on demand

• One water inlet valve assembly

• Disconnect power and shut off the water supply before starting any repair
• Use proper tools and tighten fittings to manufacturer torque—avoid overtightening plastic fittings
• Inspect water lines and seals; replace damaged hoses or gaskets to ensure a leak-free installation