Mgt8655xsoo Parts

This gas valve regulator controls and stabilizes incoming gas pressure to the range's burners, helping ensure consistent flame performance and safe operation.

• Regulates gas pressure supplied to the appliance for proper burner performance
• May help resolve weak, irregular, or no flame at the burners or oven
• Can address issues like delayed ignition, uneven heating, or burner outage
• Safety-critical component in the gas supply path

• Disconnect gas and electrical supply before servicing
• Verify gas type and inlet orientation match your appliance configuration
• Check for leaks with an approved leak-detection method after installation
• Recalibrate or adjust only per the manufacturer's instructions

This 8-32 x 3/8 screw secures panels, brackets, and internal components in your appliance so everything stays aligned and tight. Replace worn or missing hardware to restore a solid, rattle-free fit and safe operation.

• Fastens components to frames, brackets, or panels
• Helps reduce vibration, rattling, and misalignment
• Replaces missing, stripped, or corroded screws
• Correct 8-32 machine thread for tapped holes in compatible assemblies

• Disconnect power before servicing; shut off gas or water if applicable
• Start threads by hand to avoid cross-threading
• Tighten snugly without overtightening to prevent stripping

A shoulder screw that secures appliance components and provides a precise pivot or spacer point. Replaces a missing or worn screw to restore alignment, reduce rattling, and keep panels and assemblies securely in place. What it does:

• Provides a fixed-diameter shoulder for pivots, spacers, or mounting points in assemblies.
• Holds panels and moving components at the correct distance to prevent binding or friction.
• A missing or worn shoulder screw can cause misalignment, rattling, or loose parts during operation.
• Used where a smooth-bearing surface and controlled clearance are required between parts.

• Disconnect power to the appliance (unplug or shut off breaker) before servicing.
• Handle small fasteners carefully to avoid dropping into assemblies; magnetic pickup tools can help.
• Start threads by hand to avoid cross-threading; tighten snugly but avoid overtightening.

Color: White. Size: 2 oz. can. Porcelain touch-up paint.

Color: White

Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.

This broiler pan is the heat-safe tray used for broiling in the oven or broiler drawer. Replace a rusted, warped, or missing pan to maintain safe broiling and simpler cleanup by catching drippings.

• Holds food for broiling and supports correct placement under the broiler
• Collects drippings to help reduce flare-ups and smoke
• Restores safe use when the original pan is rusted, pitted, dented, or warped
• Seats on the designated rails/supports in the broiler drawer or compartment per model design

• Allow the appliance to cool completely; wear cut-resistant gloves
• Remove the broiler drawer or open the broiler compartment as your model requires
• Position the pan on the proper rails/supports and verify stable seating before use
• Follow your model's user guide for broiling setup and care

Screws for range anti tip bracket: WP3801F656-51. Includes 2 screws.

Replacement burner cap for the 4-inch sealed gas burner on your cooktop. Restores proper flame shape and helps keep the burner head clear of spills and debris for reliable ignition and even cooking. What it does:

• Covers the burner head to promote an even, focused flame for consistent heat distribution.
• Helps prevent food and liquid from entering the burner assembly and interfering with ignition.
• Can resolve common symptoms like uneven or yellowing flame, lifted flame, or a burner that doesn't heat evenly when the cap is damaged or missing.
• Fits onto the burner post and works with the existing burner head and igniter to maintain normal operation.

• Allow the cooktop to cool completely and turn off the gas supply or power to the appliance before servicing.
• No tools are normally required; remove the old cap and seat the replacement cap flat on the burner head.
• Make sure the cap is properly centered—misalignment can cause ignition issues or uneven flame.

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

The Oven Liner Touch Up Paint is an OEM part for Whirlpool ovens. This 2 oz warm white touch-up paint is designed to cover minor scratches, chips, and blemishes on the oven liner, restoring its appearance and protecting it from further damage. 

Causes of a bad oven liner include exposure to high temperatures, accidental impacts, and abrasive cleaning materials, which can lead to scratches, chips, and discoloration. Over time, these imperfections can worsen, making it necessary to use touch-up paint to maintain the oven liner’s integrity.

Symptoms of a bad oven liner include:

• Visible scratches or chips on the oven interior
• Discoloration or fading of the liner
• Increased difficulty in cleaning the oven liner
• Potential rust or corrosion in affected areas

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This left-side oven door hinge secures and supports the oven door, restoring smooth opening, closing and proper alignment. Designed to replace a worn or damaged hinge and help eliminate door sag, rubbing and improper sealing. What it does:

• Supports the oven door at the left hinge point so the door opens and closes smoothly
• Restores correct door alignment to prevent rubbing, gaps, or uneven sealing
• Eliminates sagging or a door that won't stay open or won't latch properly
• Works with the oven's door assembly to maintain safe operation

• Disconnect power to the range before starting and ensure the oven is cool
• Support or remove the oven door per the service manual before removing/installing the hinge
• Keep fasteners and mounting hardware together; torque to OEM specs if available

Color: Biscuit. Size: 13 oz. can. Enamel spray paint.

G4 orifice holder secures the gas orifice to the burner tube, keeping the orifice aligned for reliable ignition and a consistent flame. Replaces a damaged or worn holder to help restore proper burner flame behavior. What it does:

• Holds and positions the gas orifice in the burner tube for correct flame pattern and stability.
• Ensures consistent ignition and steady flame when the burner is operating normally.
• Common symptom indicators: burner won't light reliably, flame is weak or uneven, or burner performance is inconsistent.

• Turn off the appliance power and shut off the gas supply before beginning work.
• Inspect the orifice and burner tube for debris and proper alignment during installation.
• Tighten fasteners snugly but avoid overtightening; ensure the orifice is properly seated and oriented.
• After installation, check for correct ignition and perform a gas-leak check.

This gas tubing is a direct-fit replacement line that routes gas between components and restores a secure fuel path for safe burner operation. It helps stop leaks and ensure consistent gas flow to the appliance. What it does

• Replaces damaged, cracked, or corroded gas tubing that can cause leaks or loss of gas flow
• Restores a sealed connection between the gas valve and burner or between gas components
• Can resolve symptoms such as gas odor, intermittent ignition, or weak burner flame when tubing is the cause
• Designed to match OEM form and fit for straightforward replacement when listed for your model

• One gas tubing assembly as shown

• Shut off the gas supply and unplug the appliance before starting any work
• After installation, test all fittings with a leak detection solution; do not use an open flame
• Follow all local codes and OEM instructions for fittings, sealants, and torque values

This manifold assembly routes and controls water flow to your appliance's dispenser and ice/water outlets, restoring reliable delivery and preventing unwanted leaks. Designed as a direct-fit replacement for the factory manifold. What it does:

• Directs water to multiple outlets using four individual valves for precise flow control
• Replaces a failed or leaking manifold to stop dripping or standing water
• Restores water delivery when dispenser or ice/water functions do not dispense
• Ensures proper routing of inlet water to downstream components

• One manifold assembly (4-valve)

• Disconnect power and shut off the water supply before beginning repair
• Drain residual water from lines to reduce spillage when removing the old manifold
• Inspect and replace any worn tubing or clamps while access is available