Mgt8885xs Parts

This broiler pan restores a sturdy broiling surface in your oven. It holds food for high-heat broiling while the lower tray catches drippings to help reduce smoke and keep the oven cavity cleaner.

• Provides a durable surface for broiling under the broil element or flame
• Collects grease and juices beneath the food during high-heat cooking
• Replaces pans that are missing, warped, chipped, or heavily rusted
• Helps cut down on smoke and mess from burnt-on residue on a damaged pan

• Allow the oven to cool completely before handling
• Slide the pan onto the appropriate rack position per your model's instructions; no tools required
• Use oven mitts—surfaces and edges can be hot after broiling
• If your model uses a separate broiler grid or rack, position it on top of the pan before cooking

This upper door insulation restores the door's thermal barrier to help the refrigerator/freezer hold temperature and reduce condensation. It replaces deteriorated or missing insulation to improve cold-air retention and reduce frost build-up. What it does:

• Replaces worn or damaged insulation inside the upper door cavity
• Helps limit heat transfer to maintain interior temperature
• Reduces condensation and frost forming on the door liner
• Can address symptoms like uneven cooling, warm spots near the door, or excessive frost

• Disconnect power to the appliance before starting any service
• Access requires removing the inner door liner or trim—keep screws and clips organized for reassembly
• Position insulation without compressing; use the original retainer clips or adhesive as OEM specified
• Dispose of old insulation per local regulations and check door seal condition after reinstall

This oven door gasket creates a tight seal around the oven door to help keep heat and moisture inside for more even baking and cooking. It replaces a worn or torn seal to reduce heat loss and improve oven performance. What it does:

• Seals the oven door to prevent heat and smoke from leaking during operation
• Helps maintain consistent oven temperatures for more even cooking and baking
• Reduces energy loss and prevents exterior surfaces from getting excessively hot
• Addresses symptoms like visible gaps, burned or brittle rubber, smoke escaping, or longer cook times

• Disconnect power to electric ovens or shut off gas supply and pilot for gas ovens before installing
• Allow the oven to cool completely before starting work to avoid burns
• Remove the oven door or open it per your model's service instructions to access the gasket channel; replace gasket by seating it evenly around the door frame
• Inspect the gasket channel for debris and clean before installing; do not use adhesives unless specified by the manufacturer

This oven rack is a replacement wire rack that restores stable support for cookware and bakeware, letting trays and pans slide in and out smoothly. It fits into the oven's rack supports to provide even cooking placement. What it does:

• Provides a stable shelf for baking sheets, pans, and cookware inside the oven
• Slides on oven rack supports to position food closer or farther from heat
• Replaces bent, warped, or missing racks that prevent stable placement
• Helps maintain even airflow and cooking clearance by restoring proper rack height

• One replacement oven rack

• Install by sliding rack into the oven's existing rack supports until fully seated
• No special tools required; handle edges carefully to avoid pinching
• Remove racks before using self-clean cycle; allow oven to fully cool before handling
• Use oven mitts or gloves when inserting/removing while hot

This Holder ORF is a small mounting retainer used to secure internal components so parts stay aligned and stable during normal appliance operation. Replacing a damaged or missing holder prevents loose parts and rattling. What it does:

• Secures and positions a specific internal component or assembly
• Keeps parts aligned to prevent rubbing, vibration, or noise
• Restores proper fit where the original retainer is cracked, bent, or missing
• Helps maintain reliable operation by holding components in place

• Disconnect power (and gas, if applicable) before servicing the appliance
• Inspect adjacent parts and fasteners for wear; replace any damaged hardware
• Use basic hand tools; avoid over-tightening which can crack the retainer

This inner door panel replaces a damaged or cracked refrigerator door liner to restore interior protection and shelf mounting support. It keeps insulation covered and helps maintain a clean, stable interior surface for door bins and hardware. What it does:

• Covers the door cavity and protects internal insulation and wiring
• Provides mounting surfaces and anchors for door bins, shelves, and hardware
• Prevents drafts and helps maintain interior temperature by sealing around fitted components
• Common signs it's needed: visible cracks, broken mounting bosses, loose or misaligned door bins, or interior moisture buildup

• One replacement door liner

• Disconnect power or unplug the refrigerator before starting any work
• Typical installation requires removing the door inner assembly and unfastening retaining screws/clips
• Handle carefully to avoid damaging mounting bosses or trim; alignment is important for bin fitment
• If hardware is worn or damaged, inspect and replace separately as needed

This rubber door bumper cushions and aligns the appliance door to prevent slamming and reduce vibration, helping doors close smoothly and protecting cabinet and door finishes from wear. What it does:

• Acts as a cushion between the door and cabinet, absorbing impact during closing
• Helps keep the door aligned and reduces rattling or vibration during use
• Prevents metal-to-metal contact that can cause chipping, scratching, or noise
• Commonly replaced when worn, flattened, cracked, or missing

• One rubber door bumper

• Remove power to the appliance before accessing the door area or hinges
• Usually presses into a hole or snaps into a mount on the door or cabinet; no special tools required for many models
• Inspect surrounding mounting boss for damage; replace if cracked or deformed

This replacement fitting connects the appliance's water line to its internal plumbing so water flows where it's needed and stays sealed. It restores a proper watertight connection to help stop leaks and ensure reliable water delivery. What it does:

• Connects the external water supply line to the appliance's internal water inlet
• Creates a secure, watertight seal to prevent drips and leaks at the connection point
• Supports consistent water flow for ice makers, dispensers, or valves where used
• Can resolve symptoms like visible leaks, reduced water flow, or intermittent filling

• One replacement fitting

• Turn off the water supply and unplug the appliance before installing
• Inspect mating surfaces and replace any damaged O-rings or gaskets as needed
• Hand-tighten first, then snug with appropriate tools; avoid over-tightening
• If plumbing sealant is recommended by your installer, use plumber's tape on threaded connections only

This orifice holder secures the gas orifice/nozzle at the burner to help deliver fuel for consistent ignition and flame performance. It's a direct-replacement part used on compatible gas cooktop and range burners. What it does:

• Holds the gas orifice/nozzle in the correct position for proper gas flow to the burner
• Helps maintain steady ignition and an even flame across the burner
• Can prevent gas leaks or misdirected flow when installed correctly
• Commonly replaced when burners have weak, uneven, or no flame

• One orifice holder

• Turn off the appliance, shut off the gas supply, and disconnect power before servicing
• Use appropriate hand tools; avoid overtightening to prevent damage
• Inspect or replace any damaged gaskets or fittings and test for leaks after installation

This surface ignitor lights a gas burner by creating the spark needed to ignite the gas, restoring reliable ignition and consistent burner operation. Designed as a direct replacement part for compatible gas ranges. What it does:

• Generates the spark to ignite a surface gas burner so cooktop burners light reliably
• Replaces a cracked, damaged, or non-sparking electrode that prevents ignition
• Helps eliminate clicking without flame when the ignitor is functioning correctly
• Works with the range's control and valve assembly to start the burner safely

• One surface ignitor (single)

• Turn off power and gas supply to the appliance before servicing to avoid shock or gas leaks
• Handle the ceramic tip and electrode carefully; damage can prevent proper sparking
• Use factory diagrams or service manual for correct location and wiring; do not force parts

This retainer is a small mounting clip that secures internal components in your appliance, helping keep parts aligned and preventing rattles or movement. It restores proper fit and reduces noise from loose components. What it does:

• Secures panels, assemblies or hardware to prevent shifting during operation
• Keeps components aligned to reduce rattling or intermittent contact
• Helps maintain reliable operation when a worn or broken clip causes loose parts
• Common symptom: loose trim, rattling, or misaligned internal parts

• One retainer/mounting clip as shown

• Disconnect power (and water if applicable) before attempting service
• Inspect the mounting area and replace only the broken or missing clips
• Typical installation requires basic hand tools; handle plastic clips carefully to avoid breakage