Mhw35005fw0 Parts

This replacement cross-flow hose routes fluid/air between refrigerator components to restore normal operation and stop leaks or drainage issues. Durable black hose designed to match the original fit and function. What it does

• Routes condensate/drain or air between evaporator and drain areas to ensure proper flow
• Replaces cracked, split, or deteriorated hose that can cause leaks or pooling under the unit
• Helps prevent frost or moisture buildup when the original hose is blocked or damaged
• Restores correct drainage/flow where a worn hose caused poor performance or water on the floor

• One black cross flow hose

• Disconnect power to the appliance before starting any repair
• Drain water and remove any clips or clamps carefully to avoid damaging adjacent components
• Inspect and replace associated clamps or seals as needed for a secure, leak-free connection

This stator is the stationary electrical component that works with the rotor to create the magnetic field needed for motor rotation, restoring proper motor function and helping appliances resume normal operation. What it does

• Generates the magnetic field that interacts with the rotor to drive the motor
• Replaces a worn or damaged stator that can cause humming or failure to spin
• Helps eliminate intermittent operation or reduced torque caused by stator faults
• Works as part of the motor assembly to support reliable appliance performance

• One stator assembly

• Disconnect power before servicing to avoid shock or injury
• Installation requires disassembly of the appliance motor housing
• Inspect rotor, bearings, and mounting hardware while replacing the stator

This wire harness routes power and signals between the appliance control and components to restore reliable electrical connections and normal operation. It replaces damaged or worn wiring to help stop intermittent power, unresponsive controls, or component failures. What it does:

• Connects control board to motors, switches, sensors and other electrical components
• Restores broken or frayed circuit paths that cause intermittent operation or no power
• Replaces burned, corroded, or loose connector ends that cause poor contact
• Helps prevent shorting or blown fuses when original wiring is compromised

• Disconnect power (unplug or turn off breaker) before starting any repair.
• Handle connectors by the housing; avoid pulling on individual wires.
• Route and secure the harness the same way as the original to prevent pinching or heat exposure.

The Harns-Wire is an OEM part for Whirlpool front-loading washing machines. 

Causes of a bad Harns-Wire can include wear from prolonged vibration during spin cycles. The wiring may crack or split over many years of use due to constant movement inside the chassis. 

Symptoms of a bad Harns-Wire include:

• Unexpected intermittent outages or failed cycles  
• Unbalanced loads resulting in excessive shaking
• An inability to properly fill or drain water
• Error codes indicating electronic control issues

This genuine Whirlpool replacement is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore as well. 

This shield is a protective cover that helps keep internal appliance components safe from heat, debris, and wear. Replacing a damaged shield restores protection to nearby parts and helps prevent further damage. What it does:

• Covers and protects internal components from debris, heat, and contact
• Helps prevent rubbing or chafing on wiring and nearby parts
• Reduces risk of heat-related damage when the original shield is warped or missing
• May stop rattling or vibration caused by a loose or broken shield

• Shield

• Disconnect power (and gas if applicable) before servicing
• Inspect the mounting area for damage or missing fasteners before installing
• Use the correct fasteners and alignment; do not force the shield into place

A small metal hose clamp that secures flexible hoses and tubing to fittings to help prevent leaks and keep connections tight. Simple, durable replacement for worn or loose clamps on appliance water and drain lines. What it does:

• Holds a hose or tube firmly on a barb or fitting to prevent leaks or disconnection
• Resists loosening from vibration and normal use
• Restores a secure connection when an old clamp is corroded, stretched, or broken
• Helps prevent water damage from loose plumbing connections

• One metal hose clamp

• Disconnect power and shut off water supply before servicing
• Slide clamp over hose, position over fitting barb, then compress or tighten as required
• Replace any damaged hoses or fittings when installing a new clamp
• Verify a leak-free connection before returning appliance to service

This outer door assembly replaces a damaged or worn outer door to restore your appliance's appearance and allow the door to close securely. It's a direct-fit exterior door panel used where the outer skin is cracked, dented, or cosmetically damaged. What it does:

• Replaces a cracked, dented, or cosmetically damaged outer door panel
• Restores proper door alignment and helps the door close evenly
• Protects internal door components and maintains the appliance's exterior finish
• Helps eliminate rattling or loose-feeling doors caused by outer door damage

• Disconnect power and follow all safety instructions before beginning repair.
• Installation may require basic hand tools and two people for safe handling of the door.
• Some installations require transferring hinges, trim, latch, or inner door components from the old door; have those parts handy.

This counterweight is a replacement door balance weight that helps stabilize an appliance door for smoother, more controlled opening and closing. It restores proper door balance and reduces sagging or uneven movement. What it does:

• Adds counterbalance weight to a refrigerator/freezer door assembly for correct alignment
• Helps prevent door sag, slamming, or uneven closing that can compromise the seal
• Reduces strain on hinges and ensures doors operate smoothly
• Quietly stabilizes the door during normal use

• One counterweight

• Disconnect power and empty/remove door contents before starting
• Follow the appliance service manual for door removal/installation; some steps may require two people
• Use appropriate hand tools and avoid forcing parts; retain fasteners for reuse