Mhw5630hc1 Parts

The Console is an OEM replacement part for Whirlpool washers. It allows you to conveniently select and adjust various washing settings with intuitive buttons and a clear display, allowing you to easily select the desired settings for your laundry needs.

Symptoms of a faulty control panel assembly include:

• Unresponsive buttons or controls
• Malfunctioning display or erratic behavior
• Inability to select desired settings

A bad control panel assembly can occur due to regular usage, accidental damage, or wear and tear over time. If you experience issues such as unresponsive buttons, a malfunctioning display, or erratic behavior from the controls, it may be time to replace the control panel assembly.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This top panel is the exterior upper cover that protects internal washer parts and gives the appliance a finished look. It restores a secure mounting surface for the control area and helps keep water and debris out of the cabinet. What it does

• Covers and protects internal components at the top of the washer cabinet.
• Provides the mounting surface and alignment for the control console and lid.
• Restores appearance when the original panel is dented, cracked, or rusted.
• Reduces rattles or vibration caused by a loose or warped top.

• Disconnect power and water supply before starting any repair.
• Use basic hand tools; some screws or clips may need to be removed to lift the old panel.
• Handle edges carefully — metal panels can be sharp.
• Have a second person assist if needed to prevent bending or dropping the panel.

The Hose is an OEM part for Whirlpool washers.  

Causes of a bad hose can include wear and tear over time, exposure to excess heat and moisture, or accidental damage.

Symptoms of a bad hose include:

• Extended drying times or inability to fully dry clothes
• Visible cracks or splits allowing airflow issues
• Loose or disconnected ductwork connections
• Musty odors indicating trapped moisture

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The CORD POWER is an OEM part for Whirlpool washing machines. It serves as the connection between the washer and a power source, supplying electricity needed to run cycles and components. 

This power cord contains wiring designed to meet Whirlpool's rigorous safety and performance standards. It delivers steady voltage to power essential parts like the motor, timer module, and heating elements without interruption.

Symptoms of a bad power cord include:

• The washing machine not powering on when switched to a cycle 
• Cycles starting and stopping intermittently
• Surges in voltage resulting in errors or burned-out components
• An electrical burning smell coming from the cord 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Kit contains two 10 feet inlet hoses.

This touch-up paint bottle restores small chips and scratches on painted appliance surfaces to improve appearance and help protect against rust. Easy-to-apply formula matches common appliance finishes for quick cosmetic repairs. What it does:

• Covers small chips, nicks and surface scratches to improve appearance
• Helps protect exposed metal from moisture and surface corrosion after damage
• Provides a precise application for targeted repairs on doors, panels and trim
• Can be used on painted steel and metal appliance surfaces (test in an inconspicuous area first)

• Clean and dry the repair area; remove loose paint and corrosion before applying
• Shake bottle well and apply sparingly with included applicator or a small brush
• Allow adequate drying time between coats and follow any manufacturer cure instructions on the label
• Wear gloves and work in a well-ventilated area; keep away from open flame and out of reach of children

The Nozzle is an OEM part for Whirlpool washing machines. It spray clean water and detergent throughout the drum to thoroughly saturate clothes during cycles.

Common causes of replacement involve mineral deposits clogging spray ports over time or cracks reducing water pressure. Impacts from overloading or an imbalanced spin cycle may also damage plastic.

Symptoms include:

• Weak or incomplete water coverage of clothesloads
• Soap scum residue failure to rinse away fully
• Damp spots signifying poor absorption into fabrics
• Strange noises or shaking from uneven fluid dispersal

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The HARNESS WIRE is an OEM part for Whirlpool washing machines. It is a comprehensive wiring harness that connects all electronic control boards and components within the washer. 

Proper connectivity between parts through this harness is essential for running cycles, as it routes signals allowing for functions like temperature regulation, water fill levels, agitation control, and more. 

Causes of a bad harness can include pinched wires, cuts in the insulation, repeated bending in problem areas, or loose connections due to normal movement during operation.

Symptoms of a bad harness wire can include: 

• Error codes are displayed and cycles unable to advance past certain points
• Components like the motor not receiving control signals 
• Lights or displays not functioning correctly
• Intermittent or unreliable operation 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A U-bend retainer designed to secure a U-shaped heating element or tubing in place, preventing movement and vibration for reliable operation. Fits as the replacement hold-down clip used on compatible Whirlpool HVAC and appliance assemblies. What it does:

• Secures U-shaped element or tubing to the appliance frame or mounting bracket
• Prevents rubbing or vibration that can lead to wear or noisy operation
• Helps maintain proper spacing and alignment of the element for consistent performance
• Used where a compact, U-shaped clamp is required to hold components safely

• One U-bend retainer clip as shown

• Inspect the surrounding area and replaced part for damage before installing
• Use basic hand tools; align clip over the U-bend and fasten to the designated mounting point
• Disconnect power and allow components to cool before attempting repair
• Replace with the exact OEM fasteners

This genuine mounting screw secures panels and components so assemblies stay aligned and rattle-free. Designed to replace worn or missing fasteners and restore proper fit and function. What it does:

• Secures panels, brackets or trim to prevent movement and vibration
• Restores proper alignment of assemblies that feel loose or shift
• Helps eliminate rattling, squeaks, or parts that fall away during use
• Matches OEM thread and head type for correct fit

• Use the matching screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten which can strip threads or crack plastic
• Replace any additional damaged or missing fasteners for best results
• Disconnect power or follow appliance-specific safety steps before working near wiring or energized components

Spring-style hose clamp that secures flexible appliance hoses to fittings, helping keep connections tight to reduce leaks and maintain proper water flow. Use it to replace a worn or damaged clamp and restore a reliable hose seal. What it does:

• Compresses around a flexible hose to lock it onto barbs or fittings
• Helps prevent drips, leaks, and water pooling at hose connections
• Keeps hoses from slipping off during appliance operation
• Useful when a clamp is corroded, stretched, or no longer holds tension

• Disconnect power and shut off water to the appliance before starting any repairs
• Use pliers to compress the clamp for removal and installation; keep hands and face clear when releasing tension
• Inspect the hose and fitting for damage; replace the hose if cracked or excessively worn

The Handle is an OEM part for Whirlpool washing machines. As the interface point for users, this handle allows for easy opening and closing of the washer door. 

Symptoms of a bad handle can include: 

• Faded or peeling surface finishes on the handle plastic  
• Loose mounting screws or bolts that caused play
• Broken or cracked internal mounting posts
• Handles that do not stay securely in the open position 

Causes relate to long-term wear from repeated use and exposure to chemicals in the laundry room environment. Accidental damage during unloading may also occur.

This Whirlpool replacement handle restores easy machine access with a professional fit and finish. It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models for a seamless look. Proper installation returns full functionality.

The Valve is an OEM part for Whirlpool washing machines. It controls the flow of water into the washer tub at designated stages in the washing process. Water enters through the valve inlet and is distributed to internal components like the detergent dispenser, water pipes, and sump hoses. 

Causes of a bad valve can include mineral scale buildup inhibiting proper flow regulation over time, or cracks and leaks from wear and tear on rubber gaskets and seals. 

Symptoms of a bad valve include:

• Slow or incomplete fills during washing cycles  
• Water not dispensing correctly through hoses or dispensers
• External water leaks from the valve area
• Error codes related to water level or pressure issues

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Strike is an OEM part for Whirlpool washing machines. It is responsible for securely latching and locking the washer door shut during operation.

Causes of a bad door strike can include wear and tear over time, damage or bending from repeated use of the door latch, or issues with other interacting locking components like the door latch.

Symptoms of a bad door strike include:

• The washer door not latching or locking fully
• The door popping or releasing unexpectedly during a cycle
• Potential for leaks if the door is not sealing tightly
• Safety hazard if the door cannot be securely fastened

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.