Mveb765fw1 Parts

This microwave turntable assembly supports and rotates the glass tray so food heats more evenly. Replacing a damaged turntable restores smooth, stable rotation and reliable heating performance.

• Supports dishes on the glass tray and rotates them during cooking
• Engages the drive coupler to help promote more uniform heating
• Replaces a cracked, chipped, or missing turntable assembly
• Can help address wobbling, scraping noises, or failure to turn when the tray/support are damaged

• Disconnect power to the microwave before servicing
• Remove the old tray; clean the turntable track of debris
• If your model uses a roller ring, place it on the track, then seat the tray on the center coupler; ensure it sits flat and spins freely
• Do not operate the microwave without the turntable properly installed; inspect the drive coupler and turntable motor

The Thermostat is an OEM part for LG microwaves. This part monitors and regulates the temperature within the appliance. The thermostat ensures that the microwave does not overheat, automatically shutting off the power if the internal temperature exceeds safe levels. This preventive measure helps to avoid damage to the microwave and potential safety hazards in the kitchen. 

Causes of a bad thermostat can range from normal wear and tear, which may cause the component to lose its calibration over time, to overheating incidents that permanently damage its sensitivity.

Symptoms of a bad Microwave Thermostat include:

• The microwave unexpectedly turning off during use
• The microwave failing to start
• Inconsistent cooking temperatures or unevenly cooked food

This OEM LG part is also compatible with some Kenmore models.

The Installation Hardware Kit is an OEM part for LG microwaves. It includes all the necessary mounting brackets, screws, and other hardware components required for a proper and secure installation of the microwave. This kit ensures a safe and stable fitment, whether the microwave is being installed over the range, built into cabinetry, or mounted on the wall.

Causes of needing a new installation hardware kit can include missing or damaged components from the original kit, or requirements for a different installation type or location.

Symptoms indicating the need for a new kit include:

• Unstable or loose microwave installation
• Difficulty in properly aligning or securing the microwave
• Missing brackets or hardware pieces

This OEM LG part is also compatible with some Kenmore models.

This choke cover is the inner perimeter trim that snaps onto the microwave door. It secures the door choke and helps maintain proper door shielding and appearance. Replace a cracked or missing cover to restore a secure fit.

• Secures the door choke around the inner door frame
• Helps maintain proper door shielding and consistent door alignment
• Covers and protects door-frame edges for a finished look
• Helps with: cracked/missing inner trim, loose or rattling cover, visible gaps at the door perimeter, or arcing at the door edge

• Disconnect power or switch off the circuit breaker before servicing; support over-the-range units as needed
• Work on a padded surface; carefully release perimeter tabs/clips and avoid prying against the glass
• Ensure the door choke/gasket is seated evenly, then align and snap the new cover fully around the perimeter; verify smooth, even door closure
• Microwaves contain high-voltage components.

This humidity sensor assembly monitors moisture inside the microwave cavity during Sensor Cook and Reheat cycles, allowing the control to automatically adjust time and power. Replacing a failed sensor can restore accurate, reliable sensor-based cooking performance. What it does:

• Detects steam/humidity in the cavity for auto-sensing cook and reheat programs
• Sends feedback to the control board to adjust power levels and cook time
• Failure symptoms include sensor cook not starting, stopping early, "sensor" error messages, or inconsistent results on auto settings

• One humidity sensor assembly

• Unplug the appliance before service; microwaves contain a high-voltage capacitor that can retain a dangerous charge
• Handle the sensor face carefully and keep it clean; route and secure the wire harness as originally

This turntable coupler connects the microwave's turntable motor to the glass tray, rotating it for even, consistent heating. Replace a worn or cracked hub to restore smooth tray motion and reduce noise during cooking.

• Couples the turntable motor to the glass tray for even heating
• Replaces a worn, cracked, or stripped hub that prevents rotation
• Helps reduce tray wobble and scraping sounds from the center
• Common symptoms: tray not turning, intermittent rotation, clicking/grinding at the hub

• Disconnect power before servicing; microwaves contain high-voltage components
• Remove the glass tray and roller ring; lift the old coupler straight up from the motor shaft (some models may require access from below per instructions)
• Align the new coupler with the keyed motor shaft and press it fully into place
• Reinstall the roller ring and tray; verify smooth, centered rotation

This customized nut is a small fastener used to secure components inside an appliance. Replacing a stripped, rusted, or missing nut restores a tight hold, reduces vibration, and helps keep panels and brackets properly aligned.

• Threads onto a matching screw or bolt to clamp parts together
• Maintains alignment of panels, brackets, and internal assemblies
• Helps prevent vibration, looseness, and rattling during operation
• Common failure signs: missing hardware, stripped threads, or components that won't stay tight

• Disconnect power; turn off water or gas before servicing
• Match the thread size/pitch to the original fastener before installation
• Hand-start threads to avoid cross-threading; tighten until snug—do not overtighten
• Replace any worn companion hardware (screw/bolt/washer) as needed

This thermostat is a temperature-sensitive safety switch for select LG microwaves. It monitors heat at its mounting point and interrupts power when overheating is detected, helping protect internal components and restore operation once temperatures return to normal.

• Monitors temperature at its mounting location inside the microwave
• Opens the circuit to interrupt power when temperatures exceed its rating
• Helps prevent heat-related damage to internal components
• Failure symptoms include mid-cycle shutoff, no heat or no start after an overheat event, or abnormal vent/cooling fan operation

• Disconnect power at the outlet or breaker before servicing
• Microwaves contain a high-voltage capacitor; discharge it properly before touching internal parts
• Note wire positions and transfer one lead at a time; mount the thermostat firmly for accurate heat sensing
• Inspect and replace any burnt connectors; ensure clean contact with the mounting surface

This microwave grease filter captures grease and cooking residue from the exhaust air to help protect the blower and maintain airflow. Replace when the filter is saturated, damaged, or no longer cleans up adequately.

• Traps grease and particulates from cooktop vapors to keep the vent path cleaner
• Helps maintain ventilation performance and reduce lingering smoke and odors
• Replace if the mesh/frame is torn, warped, missing, or remains greasy after washing
• Symptoms of a clogged filter can include weak airflow and grease buildup under the microwave

• Disconnect power at the plug or breaker and let surfaces cool; wear gloves—filter edges can be sharp
• Access the filter from the underside; release the retaining tab or screw and slide the old filter out
• Insert the new filter into the tabs, secure the latch/screw, and ensure it sits flat and locked
• Restore power and test the vent fan for proper airflow

This replacement screw secures specified panels or components inside your appliance. Refreshing worn or missing hardware helps restore a tight fit, reduce rattling, and keep assemblies properly aligned for reliable performance.

• Provides secure fastening for brackets, panels, or internal assemblies
• Replaces stripped, rusted, or lost hardware
• Helps reduce vibration and rattling noises
• Symptoms include loose panels, shifting components, or a screw that won't tighten

• Disconnect power and allow any hot surfaces to cool before servicing
• Wear cut-resistant gloves and eye protection
• Match length and thread to the original; replace like-for-like
• Start threads by hand to avoid cross-threading; do not overtighten

This replacement door glass restores a clear viewing window and the protective barrier on your microwave door. Replace it when the original panel is cracked, shattered, or heavily scratched to keep the door secure and safe to use.

• Provides the see-through window and protective barrier within the microwave door
• Helps maintain proper door rigidity and alignment when intact
• Replace if the glass is cracked, chipped, shattered, loose, or badly scratched
• Reduced visibility, rattling, or visible damage are common symptoms of failure

• Unplug the microwave before servicing; microwaves can retain high voltage—use caution and do not open the cabinet
• Support the door; removal from the hinges may be required per your model's diagram
• Handle glass with cut-resistant gloves; edges can be sharp
• Transfer any reusable trim/clips as directed and verify the door latches and closes properly after installation

This ventilation fan motor drives the appliance's vent/cooling fan to move air through the cabinet. Replacing a failed motor restores proper airflow to prevent overheating, reduce odors, and return normal vent performance.

• Spins the ventilation fan to exhaust or circulate air as designed
• Helps protect controls and internal components by moving heat away
• Common symptoms: fan won't run, runs slowly, or makes loud humming/squealing/rattling noises
• May cause hot control areas, weak venting, or thermal shutdowns if failing

• Disconnect power at the breaker and allow the unit to cool before servicing
• Remove the necessary rear/top/cover panels to access the motor per your model
• Label and photograph wire connections; note shaft and rotation orientation
• Transfer the existing fan blade and mounting hardware; verify free spin before restoring power and testing

This Nut Assembly is a threaded fastener used to securely hold an associated component inside the microwave. Replacing a worn, stripped, or missing nut helps reduce vibration, eliminates rattling, and keeps parts properly aligned during operation.

• Provides a secure threaded anchor point for the matching screw/bolt
• Helps maintain alignment and prevent vibration or rattling
• Replaces stripped, cracked, or missing hardware
• Addresses symptoms like loose or shifting components and recurring rattling noises

• Disconnect power; if built-in, switch off the circuit breaker
• Access the mounting location, remove damaged hardware, and install the new nut assembly
• Avoid overtightening to prevent damage to threads or surrounding material

This replacement grille vent restores the lower/front airflow opening on compatible refrigerators, helping protect internal components and maintain proper ventilation. Designed to replace a cracked, warped, or missing lower vent grille. What it does:

• Covers and directs airflow at the refrigerator's lower/front ventilation area
• Protects condenser and kick-plate area from debris and accidental contact
• Restores proper airflow path that can reduce noise from turbulent flow
• Replaces cracked, broken, or missing grille that affects appearance and clearance

• One grille vent

• Remove power to the appliance before attempting removal or installation
• Typically fastens with a few screws or snap clips; inspect existing hardware and retain for reuse if undamaged
• Align tabs/clips and press or secure with the original screws until seated; do not force plastic parts to avoid breakage

This replacement holder secures the appliance door latch assembly, restoring proper catch and alignment for reliable closing. It helps maintain safe door engagement and prevents the door from popping open during use. What it does

• Secures the door latch keeper so the latch can engage and hold the door closed
• Restores proper door alignment and reduces door rattle or incomplete latching
• Addresses symptoms such as a door that won't stay closed or that pops open during operation
• Works as the mounting/retaining piece for the latch assembly in the door frame

• One holder locker part

• Basic hand tools are typically required; follow the appliance service manual for disassembly steps
• Disconnect power (and gas if applicable) before servicing to avoid injury
• Inspect the latch and strike for wear when replacing this part; replace any damaged components