Mvw8700vqo Parts

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

This replacement silverware basket holds and organizes utensils in the dishwasher, keeping forks, knives and spoons secure for a thorough wash. It restores proper utensil placement to help prevent items from falling through the rack or blocking spray arms. What it does

• Holds and separates silverware and small utensils during the wash cycle
• Keeps items upright and contained so they receive consistent spray and cleaning
• Prevents utensils from falling into the wash tub or interfering with spray arms
• Replaces a cracked, broken or missing silverware basket for better wash performance

• No special tools typically required; remove the lower rack and set the basket into the rack slots or mounting pockets
• Make sure the basket sits securely so it does not shift during loading or cycles
• Handle edges carefully—plastic parts can be sharp if damaged
• If you notice additional rack damage or mounting clips broken, inspect those components before installation

This drawer housing with valve assembly replaces the water inlet/valve housing used in select refrigerator drawers to control water flow to the dispenser/icer. Restores proper water routing and reduces leaks or no-water symptoms. What it does:

• Houses the water inlet valve and routes water to the dispenser/ice system
• Replaces cracked or damaged housing that can cause leaks under the drawer
• Restores valve mounting and alignment for reliable water flow
• Addresses symptoms like intermittent water flow, visible leaks, or loose valve fit

• Disconnect power and shut off water supply before starting service
• Remove drawer and front panels to access housing; hose clamps or clips may secure connections
• Inspect and replace any damaged hoses, gaskets, or mounting fasteners when reassembling

This replacement commercial cover protects internal components and restores the appliance's exterior appearance. It keeps wiring and controls shielded from debris and accidental contact so the unit operates safely and looks finished. What it does:

• Shields internal controls and wiring from dust, spills, and accidental contact
• Restores damaged or missing exterior panels for a clean, professional appearance
• Helps prevent short circuits and component exposure caused by cracked or broken covers
• Useful when the original cover is dented, cracked, or no longer secures properly

• One commercial cover

• Disconnect power to the appliance before starting any repair to avoid electric shock
• Basic hand tools are typically required; follow the service manual for fastener locations and order
• Inspect mounting tabs and surrounding components; replace any broken fasteners for a secure fit

This wire harness is the factory-style wiring assembly that routes power and signals between controls and components so your appliance can run reliably. It replaces damaged or worn wiring to restore secure electrical connections. What it does:

• Routes electrical power and control signals between the control board, motors, switches and other components
• Replaces frayed, broken or corroded wires and connectors that can cause intermittent operation
• Helps resolve symptoms such as unresponsive controls, functions that won't start, or intermittent power to components
• Maintains factory connector fit and wire routing for reliable, vibration-resistant connections

• Disconnect power (unplug or switch off breaker) before starting any work
• Compare the harness to the original and follow the OEM wiring diagram when reconnecting connectors
• Secure harness with existing clips/ties and avoid contact with moving parts or hot surfaces

Color: White

This genuine replacement door lock assembly secures the appliance door and signals the control so cycles start and run properly. It restores proper door latching and electronic lock function for safe operation. What it does

• Physically latches the door closed to allow the appliance to run
• Contains the switch that tells the control board the door is locked/closed
• Can resolve symptoms like the appliance not starting, showing a door error, or stopping mid-cycle
• Replaces a worn or broken latch to restore reliable door closure

• One door lock assembly as shown

• Disconnect power before attempting replacement to avoid electrical shock
• Access typically requires removing the front panel or door trim; follow your model's service instructions
• Handle edges and mounting tabs carefully to avoid damage or injury

The Facia Assembly is an OEM component specifically designed for Whirlpool brand front-loading washers. As the frontmost part of the appliance, the fascia assembly serves an important aesthetic purpose while housing critical control functions. 

Causes of a bad fascia assembly can include broken or cracked plastic, damaged capacitive touch controls, or failed LED displays over time. Exposure to excessive moisture or impact events may compromise the integrity of this front-facing component. 

Symptoms of a malfunctioning fascia assembly include:

• Unresponsive or inaccurate control buttons  
• Glitchy or unreadable display screens
• Water infiltration behind the fascia panel
• Loose, damaged, or missing mounting fasteners

Color: White

Compatible with Whirlpool, Maytag, Amana, and other brands for a direct fit replacement solution.

This door hinge secures and pivots a refrigerator or freezer door, restoring correct alignment and smooth opening. Use this replacement when a door droops, binds, or makes noise during operation. What it does:

• Provides a pivot point that supports the door and maintains alignment.
• Restores smooth opening and closing when original hinge is worn or bent.
• Helps prevent gaps that can cause cooling loss or uneven sealing.
• Reduces scraping, squeaking, or binding caused by a damaged hinge.

• One replacement hinge (single hinge assembly only)

• Disconnect power and empty door shelves before starting; support the door to prevent dropping.
• Follow OEM instructions for correct screw torque and hinge orientation; some doors require shims or spacer placement.
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage.

This cabinet is the outer housing that protects and supports the appliance's internal components, restoring the unit's structural integrity and appearance. Replaces a bent, dented, or rusted outer shell to reduce vibration and air leaks. What it does:

• Provides the main exterior enclosure and mounting surface for internal parts.
• Restores proper panel alignment to stop rubbing, rattling, or uneven gaps.
• Helps maintain correct airflow by sealing the appliance body.
• Protects wiring and controls from damage and debris.

• Disconnect power and any fuel supply before starting work.
• Installation may require removing panels and transferring brackets or trim; keep original fasteners if reinstalling.
• Cabinet replacements often require two people for safe positioning and alignment.
• Refer to the appliance's service manual or OEM instructions for specific disassembly and reassembly steps.

This outer washer tub is the main exterior tub that surrounds the inner wash basket, helping contain water and support the tub assembly for dependable washing performance. It restores the washer's water-sealing and structural support. What it does:

• Houses the inner tub and helps contain wash water to prevent leaks
• Provides structural support for the tub assembly and associated seals/bearings
• Works with the inner basket, seals, and suspension to maintain proper wash action
• Can address symptoms such as visible leaks from the tub area or excessive tub movement/noise

• One outer tub (single piece as shown)

• Refer to your model's service manual for step-by-step removal and reassembly and follow OEM torque and seal replacement guidance
• Replace any worn seals, gaskets, or mounting hardware during installation to ensure a proper water-tight fit
• Disconnect power and water supply before beginning service to avoid shock or flooding
• Inspect those components and replace as needed