Mvwb765fwo Parts

The Console is an OEM part for Whirlpool machines. Located at the top center of the washer, it houses critical interface controls for cycle selection and initiation. 

Causes of a faulty console can include the gradual breakdown of internal electronic modules from repeated wash/dry heat cycles.Moisture through small cracks over time could also lead to failures.

Symptoms of a bad console include:

• Stuck or non-responsive buttons
• Erratic or intermittent operation of cycle/option buttons  
• Inaccurate time/temperature display readings
• Failure to advance cycles or improper operation

It is compatible with additional brands including Maytag, Amana, and some Kenmore washer models.

The Tub Ring is an OEM component for Whirlpool washing machines. It is a rubber or plastic ring that fits snugly within the metal wash tub to create a protective seal. 

The tub ring prevents leakage, provides noise dampening, and distributes rotational forces evenly across the tub base during spin cycles. Its durable construction withstands continuous agitation and movement.

Causes for a bad tub ring include cracking or splits that compromise the seal over time. Foreign objects like coins or fasteners left in pockets could puncture the ring.

Symptoms of a bad tub ring include:

• Puddling, leaks, or drips under the washer after use  
• Vibrations transfer more noticeably through floors
• Higher water levels than normal required 
• Soap scum builds up around the base over multiple loads

This OEM part is also compatible with washing machines from Maytag, KitchenAid, Jenn-Air, and Kenmore.

This machine screw secures components in place to maintain proper alignment and stability during appliance operation. Replacing a worn or missing screw restores a tight fit and helps prevent vibration, noise, or loosening parts.

• Provides a secure mechanical fasten for panels, brackets, or internal assemblies
• Helps correct rattling, vibration, or loose-fitting parts
• Useful when an original screw is stripped, corroded, or lost
• Sized to match 8-18 thread applications in compatible units

• Disconnect power and shut off water or gas before servicing
• Note original screw location and orientation for correct reassembly
• Start threads by hand to avoid cross-threading; do not overtighten
• Replace any damaged clips or mounts the screw engages

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

5 foot. Package of 2.

This replacement 7-2-1 screw secures components in compatible Whirlpool appliances, providing a dependable fastener for panels and assemblies. Use it to restore proper fitment and reduce rattling or loose parts. What it does

• Fastens trim, panels, brackets, or internal assemblies to keep parts secure
• Helps stop vibration-related noise from loose components
• Restores correct mounting where the original screw is missing or damaged
• Matches the form and fit of the OEM fastener for intended attachment points

• One replacement 7-2-1 screw

• Use the correct driver to avoid stripping the screw head
• Hand-start threads before tightening to prevent cross-threading
• Tighten until snug—do not over-tighten to avoid damaging plastic or sheet-metal parts
• Disconnect power to the appliance before accessing internal areas

This drain hose coupling connects two sections of the washer drain hose to restore a watertight path for wastewater, helping prevent leaks and restore proper draining. What it does:

• Joins two drain hose sections or connects hose to a mating outlet for secure water flow
• Seals the hose connection to reduce leaks at the joint
• Restores proper draining when a damaged or missing coupling causes slow drain or leakage
• Designed to fit the OEM hose profile for a snug, stable connection

• One drain hose coupling as shown

• Turn off power and water supply before starting any repair
• Inspect hose ends for damage; trim to clean cut if required for proper fit
• Push hose ends fully onto the coupling and secure with manufacturer-recommended clamps

Color: White

The Washer Console is an OEM part for Whirlpool washing machines. It houses the control panel and electronic components responsible for operating the washer. This console is designed to withstand the harsh washing environment and provide an intuitive interface for setting cycles and options.

Causes of a bad console can include water damage over time, cracks or damage to the console casing, or failures of the electronic modules.

Symptoms of a bad console include:

• Unresponsive or erroneous displays
• Buttons sticking or malfunctioning
• Cycle or program options not working properly
• Water leaks inside the console area

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Size: 6-32 x 9/32 inch.

This factory fastener secures appliance panels and components for a tight, rattle-free fit. Replace a missing, stripped, or corroded screw to keep assemblies aligned and performing as intended.

• Fastens panels, brackets, or assemblies in place
• Helps reduce vibration and rattling caused by loose hardware
• Maintains proper alignment of parts to prevent premature wear
• Common signs you need it: missing screw, loose panel, vibration/buzzing noises, or hardware that won't tighten

• Disconnect power; for gas or water-connected appliances, shut off supply lines before service
• Match the screw to the original; verify size, length, and thread before installation
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Snug only—do not overtighten, especially into plastic or thin sheet metal

This replacement name plate restores the appliance's identification label so model and serial information is legible and the exterior looks complete. It's a simple cosmetic and identification part that helps owners read key appliance info. What it does

• Replaces a faded, damaged, or missing identification label
• Restores readable model/serial/manufacturer details for service and registration
• Improves cosmetic appearance where the original label is worn or peeled
• Helps prevent confusion when ordering parts or scheduling repairs

• One replacement name plate

• Clean and dry the mounting surface thoroughly before installing
• Align carefully and press firmly if adhesive-backed; use the original fasteners if applicable
• Handle by the edges to avoid transferring oils or smudges to the label

The Lid Hinge is an OEM component specifically designed for Whirlpool washing machines. It provides the mechanism that allows the washer lid to properly open and close. 

Causes can include normal wear and tear over time, as well as damage from accidental impacts or overloading of clothes into the washer. The constant motion of the lid puts stress on the hinge, and failure is likely if it becomes worn.

Signs of a bad lid hinge include:

• Excessive noise emanating from the lid area 
• Scratches or damage visible on the hinge arms
• Inability to latch the lid securely in the closed position
• Uneven gaps around the lid frame when shut

This OEM Whirlpool replacement hinge ensures smooth, dependable opening and closing of your washer lid for years to come. It is also compatible with some Maytag, Amana, Jenn-Air, and select Kenmore models.

A U-bend retainer designed to secure a U-shaped heating element or tubing in place, preventing movement and vibration for reliable operation. Fits as the replacement hold-down clip used on compatible Whirlpool HVAC and appliance assemblies. What it does:

• Secures U-shaped element or tubing to the appliance frame or mounting bracket
• Prevents rubbing or vibration that can lead to wear or noisy operation
• Helps maintain proper spacing and alignment of the element for consistent performance
• Used where a compact, U-shaped clamp is required to hold components safely

• One U-bend retainer clip as shown

• Inspect the surrounding area and replaced part for damage before installing
• Use basic hand tools; align clip over the U-bend and fasten to the designated mounting point
• Disconnect power and allow components to cool before attempting repair
• Replace with the exact OEM fasteners

This siphon break kit prevents wastewater from siphoning back into the dishwasher, helping keep the tub and dishes clean and reducing drainback issues. Fits the dishwasher drain assembly to restore proper draining function. What it does:

• Stops backflow by breaking the siphon effect in the drain line
• Works with the dishwasher drain hose and pump to maintain one-way drainage
• Helps address symptoms like water remaining in the tub, partial drains, or water backing into the tub
• Supports proper drainage to reduce odors caused by standing water

• One siphon break kit

• Disconnect power to the appliance and turn off the water supply before starting
• Inspect the drain hose routing and secure the siphon break at the recommended height per the dishwasher's service instructions
• Use basic hand tools; hose clamps or fasteners may be required

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.