Mvwp575gwd Parts

The Gearcase is an OEM part for Whirlpool washing machines. It houses key transmission components such as gears, shafts, and pulleys that work together to propel the wash basket and spin it during the cycle. As a result, it plays a crucial role in agitating clothes to wash and spin water out of them. 

Causes of a bad gearcase can include wear and tear of internal parts over time and prolonged use, gear cracking or sheering, lubrication issues, or seal leaks.

Symptoms of a bad gearcase include:

• The washer fails to agitate or spin clothes
• Abnormal noises emanate from the transmission area  
• Vibration issues occur, especially during high-speed spins
• The washer is unable to move into desired cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. Replace yours today to keep your washer running smoothly.
 

The Electronic Control Board is an OEM part for Whirlpool washers. It serves as the central command hub, overseeing all electrical operations including cycles, temperatures, spin speeds, and safety features. The control board receives input signals to properly run the motor, heating elements, pumps, valves, and other components.

Causes of a bad control board can include short circuits, water intrusion causing rust or failure, excessive shock, or simple component wear over time.

Symptoms of a failed control board include:

• The washer does not power on or cycles cannot be selected
• Inability to advance through cycles 
• Issues with specific components operating like heating or agitation   
• Error codes displayed

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This factory screw secures appliance panels and components, keeping them properly aligned and quiet during operation. Replace a stripped, corroded, or missing fastener to restore a snug fit and dependable performance in the original mounting location. What it does:

• Fastens brackets, panels, trim, or internal hardware to the cabinet/frame as specified by the manufacturer
• Helps maintain proper alignment and reduce rattling or vibration when a screw is worn or missing
• Direct replacement for damaged, stripped, or rusted hardware
• Used in various locations per the service diagram; match to the original position

• 1 screw

• Disconnect power (and shut off water or gas, if applicable) before servicing.
• Compare length and thread style to the original; install in the same location.
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten.
• Reinstall any brackets or panels in the correct order.

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

This genuine replacement door lock assembly secures the appliance door and signals the control so cycles start and run properly. It restores proper door latching and electronic lock function for safe operation. What it does

• Physically latches the door closed to allow the appliance to run
• Contains the switch that tells the control board the door is locked/closed
• Can resolve symptoms like the appliance not starting, showing a door error, or stopping mid-cycle
• Replaces a worn or broken latch to restore reliable door closure

• One door lock assembly as shown

• Disconnect power before attempting replacement to avoid electrical shock
• Access typically requires removing the front panel or door trim; follow your model's service instructions
• Handle edges and mounting tabs carefully to avoid damage or injury

Note: Bearings are only available with the gearcase assembly.

This door hinge secures and pivots a refrigerator or freezer door, restoring correct alignment and smooth opening. Use this replacement when a door droops, binds, or makes noise during operation. What it does:

• Provides a pivot point that supports the door and maintains alignment.
• Restores smooth opening and closing when original hinge is worn or bent.
• Helps prevent gaps that can cause cooling loss or uneven sealing.
• Reduces scraping, squeaking, or binding caused by a damaged hinge.

• One replacement hinge (single hinge assembly only)

• Disconnect power and empty door shelves before starting; support the door to prevent dropping.
• Follow OEM instructions for correct screw torque and hinge orientation; some doors require shims or spacer placement.
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage.

This genuine replacement screw secures components in compatible Whirlpool appliances, restoring proper fit and preventing rattles or loose panels. Use it when original fasteners are missing, stripped, or damaged. What it does:

• Fastens panels, brackets or small components to maintain structural stability
• Replaces missing or worn screws that cause vibration, rattling, or loose parts
• Restores secure connections after repairs or part replacements
• Helps prevent further damage by keeping parts properly aligned

• Turn off and unplug the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and hand-start the screw to prevent cross-threading
• Keep small parts away from children and pets during installation

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

• Rear panel detaching from frame opening gaps
• Increased noise and vibrations from a compromised seal  
• Stress on other connections from improper mounting points
• Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.