Mvwx500w1 Parts

Impeller cap that fits over the pump impeller to protect moving parts and help maintain proper water circulation. Replacing a cracked or missing cap helps reduce leaks and restore reliable pump performance. What it does:

• Covers and protects the pump impeller from debris and direct contact.
• Helps maintain correct water flow and impeller alignment inside the pump housing.
• A damaged or missing cap can cause reduced circulation, noisy operation, or leaks near the pump area.
• Small, inexpensive replacement that can prevent further pump damage when installed promptly.

• Disconnect power (and water if applicable) before accessing the pump area.
• Access may require removing an access panel or lower kick plate; keep fasteners and panels organized.
• Press the cap onto the impeller until fully seated; avoid forcing if resistance indicates other damage.
• Inspect the impeller and nearby seals while replacing the cap; replace the pump assembly or seals if they show wear.

This strike is the replacement door latch strike that secures the appliance door when closed, restoring a solid door catch and proper sealing. Use it to replace a worn or broken strike that prevents the door from latching. What it does:

• Provides the mating catch for the door latch so the door stays closed
• Restores proper door alignment and sealing when the original strike is damaged
• Helps eliminate issues like a loose or unseated door that won't stay closed
• Works with the existing latch assembly to re-establish reliable operation

• Basic hand tools required; unplug appliance or disconnect power before service
• Remove door trim or access panel as needed to reach the strike mounting screws
• Align strike with latch, tighten fasteners securely, and test door operation

Kit contains two 10 feet inlet hoses.

This replacement brace reinforces appliance cabinet structure to restore proper alignment and reduce vibration. It helps maintain secure mounting of adjacent panels so doors and controls operate smoothly. What it does:

• Provides structural support for the appliance cabinet and connected panels
• Reduces rattling or vibration caused by loose or bent cabinet components
• Helps realign panels that are pulling away or not closing flush
• Useful when visible damage, bending, or missing support causes fitment issues

• Disconnect power and, if applicable, gas supply before starting any repair
• Remove outer cabinet panels or access panels to reach the brace mounting points
• Retain original fasteners when possible; replace damaged screws or clips as needed

This electronic control board is the washer's user interface assembly that manages cycle selection, timing and communicates commands to the machine. Replaces a failed UI board to restore touchpad/display control and cycle operation. What it does:

• Serves as the washer's main user interface and control logic for cycle selection and timing
• Sends commands to motors, valves and sensors to start and advance wash cycles
• Controls and displays cycle status, options and user inputs
• Common symptom link: unresponsive touchpad, blank or erratic display, or washer not starting/responding

• Disconnect power before attempting any service to avoid shock or damage
• Handle the board carefully and avoid touching contacts; use anti-static precautions if possible

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This dispenser is the exterior door component that delivers chilled water and/or ice from the refrigerator, restoring normal dispensing and preventing drips or jams. It replaces a damaged, cracked or non-functioning door dispenser. What it does

• Guides water and ice from the internal plumbing to the exterior spout so items can be dispensed from the door.
• Re-establishes a secure spout and actuator for reliable dispensing and reduced leaks.
• Stops common dispenser symptoms such as leaking at the door, stuck or loose dispenser lever, and misaligned spout.
• Helps restore normal dispensing when the door dispenser is cracked, broken, or no longer seating properly.

• One dispenser assembly.

• Disconnect power and shut off the refrigerator water supply before beginning.
• Remove the interior door panel and any trim to access the dispenser assembly; keep fasteners organized for reassembly.
• Inspect and replace any worn gaskets or seals to prevent leaks; ensure proper hose routing.
• Test operation and check for leaks after reconnecting power and water.

This replacement bezel fits around the washer lid lock assembly to restore appearance and help secure the lock. It provides a clean finish where the lid lock mounts and helps keep the latch area properly aligned. What it does:

• Replaces a cracked, broken or missing bezel that exposes the lid lock assembly
• Helps the lid lock sit flush so the lid can latch reliably
• Restores the washer's top appearance and prevents debris from entering the lock area
• Fits the factory lid lock opening and snaps or screws into place depending on model

• One bezel as shown

• Disconnect power to the washer before servicing to avoid electrical shock
• Remove the lid or access panel as needed to reach the lock area; retain screws and fasteners
• Align bezel over the lock assembly and secure by snapping or fastening per your model's configuration
• If the lid lock itself is damaged or the latch still won't engage after replacing the bezel, inspect the lock assembly and strike for wear

This replacement lid restores the top cover of a top-load washer, protecting the wash tub and providing a finished appearance. It's a direct-fit exterior part designed to replace a damaged or missing lid. What it does:

• Covers the washer tub to prevent debris access and retain water spray during operation
• Restores proper lid closing and helps the lid switch engage for normal washer cycles
• Replaces cracked, dented, or warped lids that affect appearance or function
• Helps reduce vibration-related noise by providing a secure top surface

• One replacement washer lid (single piece)

• Remove power and ensure the washer is disconnected before servicing
• Lift off or unbolt the existing lid per the washer's service instructions; mounting hardware may be reused unless damaged
• Handle the lid carefully to avoid chipping paint or scratching the finish
• Inspect and replace any damaged components separately