Nfw 7200Tw Parts

This small replacement clip secures a press (push) switch to the appliance control panel so the switch stays aligned and operates reliably. It restores proper button engagement and prevents the switch from working loose. What it does:

• Holds the press/push switch firmly in the control panel or console
• Keeps the switch aligned so button presses register correctly
• Helps stop intermittent or loose-feeling buttons caused by a failing retainer
• Prevents the switch from shifting or falling out during use

• Disconnect power before starting any repair to avoid shock or injury
• Access typically requires removing the control panel or console—retain screws and note their locations
• Clip installs by snapping into the panel and seating the switch; small pliers may help with alignment

The Valve is an OEM part for Whirlpool washing machines. It controls the flow of water into the washer tub at designated stages in the washing process. Water enters through the valve inlet and is distributed to internal components like the detergent dispenser, water pipes, and sump hoses. 

Causes of a bad valve can include mineral scale buildup inhibiting proper flow regulation over time, or cracks and leaks from wear and tear on rubber gaskets and seals. 

Symptoms of a bad valve include:

• Slow or incomplete fills during washing cycles  
• Water not dispensing correctly through hoses or dispensers
• External water leaks from the valve area
• Error codes related to water level or pressure issues

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Strike is an OEM part for Whirlpool washing machines. It is responsible for securely latching and locking the washer door shut during operation.

Causes of a bad door strike can include wear and tear over time, damage or bending from repeated use of the door latch, or issues with other interacting locking components like the door latch.

Symptoms of a bad door strike include:

• The washer door not latching or locking fully
• The door popping or releasing unexpectedly during a cycle
• Potential for leaks if the door is not sealing tightly
• Safety hazard if the door cannot be securely fastened

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This Whirlpool Clamp is an OEM part for select Whirlpool washing machine models. This clamp plays a crucial role in securing the washer's door seal or tub parts, ensuring a tight and leak-proof connection. 

Clamps in washers can become ineffective due to metal fatigue, corrosion, or damage during maintenance activities. A compromised clamp can lead to a loosened door seal or tub connections, resulting in potential leaks or operational inefficiencies.

Symptoms of a failing washer clamp include:

• Visible water leakage around the washer door or under the machine.
• The door seal appears loose or detached.
• Unusual noises during operation, indicating loose components.
• The washing machine vibrates more than usual, suggesting misaligned parts.
• Difficulty in securing the clamp during maintenance or part replacement.

This genuine Whirlpool OEM replacement part is compatible with Maytag, Jenn-Air, and Kenmore models.
 

This electrical connector links wiring within the appliance's harness, restoring a secure, reliable connection for proper operation. Use it to replace a damaged or corroded connector that's causing intermittent power or component failures.

• Creates a solid electrical connection between harness leads
• Helps resolve issues like intermittent operation, no power to a component, or visible heat damage at a connection point
• Maintains correct current flow and reduces risk of arcing at loose terminals
• Designed to fit the specified harness location per model

• Disconnect power and shut off utilities before servicing
• Match wire colors/positions and transfer one lead at a time to avoid miswiring
• Ensure terminals are fully seated and the connection is snug
• Inspect surrounding wiring for heat damage or corrosion and address as needed

This replacement trap sits in the dishwasher's sump/filtration area and captures larger food particles before they reach the pump. It helps maintain cleaning performance and reduce clogs that can lead to poor wash results or draining issues.

• Screens debris to protect the wash and drain pump
• Helps maintain proper water circulation and draining
• Damage or warping can let debris bypass the filter system
• Symptoms include poor cleaning, standing water, unusual grinding noises, or odors

• Disconnect power and shut off water supply before servicing
• Remove the lower rack; take out the lower spray arm and filters to access the trap
• Release the trap's locking tabs/fasteners, remove, and seat the new trap fully
• Reinstall filters and spray arm; run a short cycle to check for leaks and proper operation

This replacement frame restores the structural support for the component it holds, helping it fit securely and operate smoothly. Replace a cracked, warped, or broken frame to bring back proper alignment and stability.

• Provides rigid support and correct alignment for the attached component
• Maintains proper spacing and level so items sit correctly
• Helps associated drawers or bins slide and seat smoothly where applicable
• Common signs of failure: cracks, broken tabs, warping, wobble, or poor fit

• Disconnect power before servicing
• Remove the affected assembly and set aside any inserts or hardware from the old frame
• Transfer reusable parts (such as glass, rails, or gaskets) to the new frame
• Ensure the frame is fully seated and avoid overtightening any fasteners

This replacement seal restores a tight barrier between mating parts in your appliance, helping contain moisture at the joint. A fresh seal prevents leaks and supports proper performance when the original is worn, cracked, or compressed. What it does:

• Creates a moisture-tight seal between components to contain water at the connection
• Helps prevent drips, pooling, or seepage around the joint
• Replace if the seal is cracked, torn, flattened, deformed, or brittle
• Symptoms can include dampness at the joint, small leaks, or a loose fit

• 1 seal

• Disconnect power and shut off water supply before servicing
• Note the seal's orientation during removal to ensure correct placement
• Clean and dry mating surfaces; remove old residue or debris for a proper seal
• Seat the new seal evenly without twisting; verify full, uniform contact before reassembly

This replacement seal restores the appliance's sealing surface to help prevent leaks and maintain proper performance. It fits into the door/tub opening to re-establish a tight seal and reduce visible water or air escape. What it does:

• Forms a flexible sealing barrier around the appliance opening to help stop leaks.
• Keeps water, moisture, and common odors from escaping the appliance cavity.
• Helps maintain consistent internal conditions by closing gaps from worn or damaged seals.
• Common symptoms indicating replacement: visible cracks, tears, deformation, gaps, water pooling, or persistent odors.

• Always disconnect power and shut off water before starting work.
• Remove the old seal completely and clean the mounting surface before installing the new seal.
• Press the new seal evenly into the retainer/groove; avoid stretching or twisting the gasket.

The Tank is an OEM part for Whirlpool washing machines. It properly dispenses detergent during the wash cycle.

Causes of a bad detergent tank can include: cracks, holes or other damage that cause leakage or improper detergent dispensing. Scaling or mineral buildup inside the tank over time may also lead to detergent dispensing issues.

Symptoms of a bad detergent tank include:

• Detergent not being fully dispensed or released during the wash
• Residue or leftover detergent remaining in the tank after cycles
• Clothes not getting properly cleaned due to insufficient detergent release

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This inner door panel replaces a cracked or damaged interior door surface to restore form and function. It protects internal components and helps maintain the door's appearance and insulating barrier. What it does:

• Replaces a damaged or cracked inner door panel to restore the door's structural integrity
• Protects internal components and wiring housed inside the door
• Helps maintain the door's interior appearance and insulation
• Commonly used when the door shows visible damage, deformation, or separated layers

• Disconnect power to the appliance before starting any repair
• Handle carefully to avoid scratching or stressing the panel; use soft supports when removing the door
• Installation typically requires removing the door trim and fasteners; keep hardware organized

This rotor is the rotating component of a motor that helps convert electrical energy into mechanical motion for appliance operation. It replaces a worn or damaged rotor to restore smooth motor rotation and reduce abnormal noise. What it does:

• Spins inside the motor to transfer rotational force to the appliance drive system
• Restores proper motor rotation when a rotor is damaged or scored
• Helps reduce grinding, knocking or excessive vibration caused by a bad rotor
• Works with the motor stator, bearings, and shaft to maintain normal operation

• Disconnect power to the appliance before starting any repair
• Rotor replacement often requires partial motor disassembly; handle bearings and shaft surfaces carefully
• Inspect associated bearings, shaft, and motor housing for wear and replace if needed