Nfwt200tw Parts

The Control Board is an OEM part for Whirlpool washers. It controls and coordinates the various functions and cycles of the appliance. It communicates with other components, such as the motor, pump, and sensors, to ensure proper timing and sequencing of the wash cycles.

A bad control board can occur due to electrical malfunctions, power surges, or damage from water exposure. If you notice symptoms such as the washer not starting, cycles not completing, or error codes appearing on the display, it may be time to replace this part.

Symptoms of a bad main control board include:

• Washer not starting
• Cycles not completing
• Error codes on the display

Restore your Whirlpool washer by replacing the faulty or damaged main control board with this genuine OEM part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Vent Coupler is an OEM replacement part for Whirlpool washers. This vent coupler plays a crucial role in maintaining proper airflow and ventilation within the washer. Its precise design and compatibility ensure efficient operation and aid in preventing issues related to moisture buildup and overheating.

A damaged or malfunctioning vent coupler can impede the washer's ability to ventilate properly, leading to potential moisture-related problems or overheating issues. Causes of a faulty vent coupler may include wear over time, blockage due to debris, or damage from external factors.

Symptoms of a defective Vent Coupler may include:

• Excessive heat buildup during washer operation
• Moisture accumulation or condensation within the washer's interior
• Inefficient drying or prolonged drying cycles

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

The Vent Hose is an OEM part for Whirlpool washing machines. This vent hose allows air to circulate in and out of the washer, preventing pressure build-up and ensuring proper water drainage. It helps maintain the efficiency and effectiveness of the washing machine by facilitating the necessary airflow during the wash and spin cycles.

Common causes of a bad vent hose include wear and tear from regular use, blockages from lint or debris, and damage from mishandling or improper installation.

Symptoms of a bad vent hose include:

• Water not draining properly from the washer
• Unusual noises during the wash or spin cycles
• Leaks or water pooling around the washer
• Visible cracks, splits, or blockages in the hose

This OEM part is also compatible with some Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This dispenser drawer slides into the washer's dispenser housing and holds detergent and laundry additives for each cycle. Replace a cracked, stuck, or missing drawer to restore smooth operation and proper dispensing. What it does:

• Holds and organizes detergent and other laundry additives in labeled compartments
• Works with the dispenser housing to flush products into the tub at the correct time
• Helps contain liquids to reduce drips and spills around the dispenser area
• Typical failure symptoms: cracked/broken face or tabs, drawer binding or popping out, detergent left in the drawer, or water leaking at the dispenser

• 1 dispenser drawer

• Disconnect power and turn off water before servicing
• Fully extend the old drawer, press the release tab, and pull it free from the housing
• Move over any removable siphons or inserts from the old drawer if present
• Slide the new drawer in until it latches and glides smoothly; run a quick test cycle to check dispensing and leaks

This rubber seal fits around the water temperature sensor where it passes through the tub or housing. It restores a watertight barrier at the sensor port to help prevent leaks and ensure reliable temperature feedback.

• Creates a watertight seal around the temperature sensor
• Helps prevent drips or leaks from the sensor opening
• Supports stable, accurate temperature readings during cycles
• Typical failure signs: cracked, flattened, or brittle seal; moisture at the sensor area; pooling water beneath the unit; temperature-related faults

• Disconnect power and turn off water supply before servicing
• Access the sensor location and drain any remaining water
• Withdraw the sensor, remove the old seal, and clean the seating surface
• Lightly moisten the new seal with water, seat it fully, reinstall the sensor, and check for leaks during a test cycle

Drain hose retainer keeps the appliance's drain hose securely fastened to the cabinet or pump, helping prevent the hose from slipping loose. Replacing a broken retainer reduces leaks and improper draining caused by a detached hose. What it does:

• Secures the drain hose to the cabinet, pump outlet, or drain connection to maintain correct hose positioning.
• Helps prevent water leaks and hose disconnection during drain cycles.
• Common symptoms of a failed retainer: visible hose movement, water at the rear or floor, or intermittent draining issues.
• Replaces worn or broken retainers that no longer hold the hose firmly.

• Always disconnect power and turn off water before servicing the appliance.
• Access may require moving the appliance or removing a rear/access panel to reach the hose retainer.
• Seat the drain hose fully in its proper position, snap or clip the retainer into place, and verify the hose is secure and not kinked.
• Inspect the drain hose for cracks or wear while replacing the retainer; replace the hose if damaged.

This O-ring is a direct replacement sealing ring that restores a watertight connection on the associated Whirlpool appliance assembly. Replacing a worn O-ring helps stop leaks and prevents water damage or drips at the joint. What it does:

• Provides a compressible seal between mating parts to prevent water leaks.
• Commonly used where hoses or fittings meet valves, dispensers or water lines.
• Fits into a groove to maintain pressure and stop slow drips or pooling.
• Replace when cracked, flattened, or pinched to restore proper sealing.

• Turn off water supply and unplug the appliance before replacing the seal.
• Remove the old O-ring, clean the mating surfaces, and inspect for nicks or debris.
• Lubricate the new O-ring if recommended by the manufacturer and seat it evenly in the groove.
• Test connections for leaks after restoring power and water.

This electronic control board is the main control that manages appliance settings, cycles, and user inputs so the appliance responds correctly to commands. Replacing a faulty board can restore normal control operation and displayed feedback. What it does:

• Receives input from the control panel and sends signals to components to run selected cycles
• Manages timers, cycle selection, and display indicators so the unit follows chosen programs
• Common symptom linkage: unresponsive or erratic controls, blank or incorrect display, cycle failures, or appliance not starting
• Can produce diagnostic/error codes when onboard sensing detects faults

• Disconnect all power before servicing to avoid shock or damage
• Handle the board by edges and avoid static discharge; use ESD precautions if available
• Verify connector placement and orientation before reconnecting; do not force terminals

This power cord is the replacement electrical lead that supplies mains power to the appliance, restoring safe, reliable operation when the original cord is damaged or worn. What it does

• Delivers AC power from the wall outlet to the appliance's internal wiring and controls.
• Replaces frayed, cut, melted, or otherwise damaged cords that can cause intermittent power or safety hazards.
• Helps eliminate issues like no power, intermittent power loss, or visible cord insulation damage.
• Restores a secure connection at the appliance strain-relief and terminal block when installed correctly.

• One replacement power cord.

• Always disconnect power at the circuit breaker or unplug the appliance before installing.
• Inspect terminal block and strain-relief; replace any damaged hardware and secure the cord per the appliance wiring diagram.
• Follow the appliance manufacturer's wiring diagram for correct conductor routing and grounding.

This electronic control board replaces the main control module that governs oven functions, display, and user inputs. It restores reliable cycle control so the oven can run bake, broil, timers, and display settings correctly. What it does:

• Controls oven temperature settings, bake/broil cycles and timed cooking functions
• Manages display and touchpad/console responses for user inputs
• Coordinates safety features such as timed shutoff and element relays
• Common symptom: blank or non-responsive display or touchpad
• Common symptom: oven won't heat or cycles incorrectly

• One electronic control board

• Disconnect power to the appliance at the breaker before starting
• Handle the board carefully to avoid static discharge and physical damage
• Follow OEM disassembly/reassembly steps and secure all connectors firmly
• After installation, restore power and verify proper operation of controls and cooking functions

Kit contains two 10 feet inlet hoses.