Ngm5664uc Parts

The Nut is an OEM component specifically designed for select Bosch gas cooktops. As a fastening mechanism, it firmly holds valves and brackets without loosening.  

Zinc plating resists corrosion ensuring dependable seating even under pot handles and continuous thermal expansion/contraction. Precision threading aligns without galling or binding that could jeopardize safe regulator positioning.

Causes requiring nut replacement commonly relate to wear through threads no longer maintaining clamping pressure on brass regulators over decades of use. Physical damage or over-tightening during assembly/service could also crack or distort housings.

Symptoms signaling the need for new nuts include:

• Gas leaks detected around valve connections or mounting points
• Loosened assemblies enabling unwanted vibrations from frequent cooking  
• Difficulty reaching proper tightening torques without hardware damage

This OEM Bosch replacement nut is also compatible with Thermador, Gaggenau, and some Kenmore ranges.
 

The Burner Holder is an OEM component specifically designed for Bosch ranges. It braces the simmer ring burner assemblies securely in place on the cooktop. Correct alignment ensures proper flame distribution and even heating across each cooking zone. 

Symptoms of a bad burner holder include burners that shift positions, are loose, or flames that behave unevenly. Failure to provide stable, grounded support necessitates replacement.

Causes of a bad burner holder can involve wear from continual assembly/disassembly of burners for cleaning. Heat exposure over time may also lead to material degradation or cracking.

Causes of a bad burner holder include:

• Misaligned or unstable burner placement  
• Improper flame dispersal or hotspots below pans
• Difficulty securing burners firmly in position

This OEM Bosch part is also compatible with Thermador and some Kenmore ranges. Replace yours for trouble-free use of precisely stationed burners.
 

The Pressure Regulator is an OEM replacement part for Bosch gas cooktops. It maintains consistent burner flame levels for precise meal preparation, maximizing fuel efficiency. Even pressure safeguards safety through controlled gas flow.

Causes of a bad pressure regulator can include deteriorating diaphragm seals or valve shafts due to repetitive operations over the appliance's lifespan. Mineral scales from sediment in gas lines threaten integrity.

Symptoms of a bad pressure regulator include:

• Flames lift or flare away from burner heads unpredictably   
• Burners cannot maintain set heat levels, constantly cycling 
• Difficulty achieving desired flame height or cooktop shuts off
• Potential safety hazards like uncontrolled gas leakage

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement holder is the mounting bracket used to secure a component inside the appliance, restoring proper alignment and support so parts stay in place during normal use. It helps reduce noise and wear caused by loose or misaligned components. What it does:

• Provides a secure mounting point for the associated component to prevent movement and vibration
• Restores proper spacing and alignment so connected parts operate smoothly
• Helps eliminate rattling or knocking caused by a missing or damaged bracket
• Durable replacement designed to match the OEM fit and function

• One holder as pictured

• Compare the part to the original before installation to ensure fit and orientation
• Turn off power and unplug the appliance before beginning any repair
• Use basic hand tools; avoid overtightening fasteners to prevent damage

This push-on retainer clip holds a 6mm shaft securely in place on compatible appliance components, restoring proper axial restraint and preventing parts from sliding off during operation. Simple, low-profile fastening for shaft retainment. What it does:

• Secures shafts and spindles with a 6mm outer diameter to prevent axial movement
• Keeps knobs, pulleys, or rotating components positioned correctly during use
• Commonly used where a quick, tool-free clip is required for retention
• Can resolve symptoms like loose or detached knobs, wobbling pulleys, or parts sliding along the shaft

• One push-on retainer clip sized for 6mm shaft mounting

• Push the clip onto the shaft groove until it snaps into place; ensure full engagement before operating
• Use snap-ring pliers or appropriate tools if removal is required to avoid damage
• Wear eye protection when installing or removing clips to guard against sudden release

This clamp secures flexible hoses and small tubes to fittings, keeping connections tight to help prevent leaks and movement. It's a small replacement clip used on water and drain lines in many appliances. What it does

• Holds a hose or tube firmly to a barb or nipple to maintain a sealed connection
• Helps stop leaks caused by loose or damaged hose connections
• Prevents hoses from slipping off during operation and reduces vibration noise
• Used wherever a small retaining clamp is required on water or drain lines

• One clamp

• Turn off power and shut off water supply before replacing the clamp
• Slide clamp over the hose, push hose fully onto the fitting, then compress or tighten clamp as required
• Use pliers or the correct tool for the clamp type; avoid damaging the hose when installing
• Replace if corroded, cracked, or not seating properly

The Tube is an OEM part for Bosch cooktops. It provides stable containment for the gas burners that allow for cooking flexibility. Precise flame control delivers heating power for any cooking task. 

Causes of a bad gas tube cooktop can include cracks or damage to the enamel surface as a result of pots sliding or debris falling. Wear and tear of internal components like control valves or pilots over time also indicates the need for replacement.  

Symptoms of a bad tube include:

• Flames that cannot be adjusted or controlled properly
• Burners that are difficult to ignite or stay lit  
• Cracks or chips in the enamel surface exposing metal below

This OEM Bosch part is also compatible with Thermador and some Kenmore models. 

This cable harness is the factory-style wiring assembly that connects electrical components, making it easier to restore reliable power and signal paths in the appliance. Replaces damaged or frayed harnesses to help resolve intermittent or no-power issues. What it does

• Routes and connects power and control signals between components (connectors included).
• Restores electrical continuity when worn, pinched, or damaged wiring causes failures.
• Common symptoms: appliance won't power on, controls unresponsive, intermittent operation, or visible burned/ frayed wires.
• Helps prevent short circuits caused by exposed conductors when replaced promptly.

• One complete cable harness as shown

• Disconnect all power (unplug or shut off circuit) before starting repairs.
• Label or photograph connector locations before removal to ensure correct reassembly.
• Avoid crushing or kinking the harness; route and secure per original routing to prevent wear.
• Replace with the exact part number to ensure correct fit and connector types.

This retaining washer secures a control shaft or hub to keep components in place during operation, helping restore proper control movement and prevent parts from sliding off the shaft. Simple replacement when a worn or missing retainer causes loose knobs or shifting parts. What it does:

• Fits onto a control or drive shaft to hold a knob, hub or gear in position
• Prevents axial movement that can cause loose or slipping controls
• Commonly replaced when the original washer is bent, cracked, or lost
• Works with compatible Bosch control assemblies and hubs

• One retaining washer

• Recommended for users comfortable with basic appliance disassembly; unplug appliance before starting
• Remove the control knob or panel per model instructions to access the shaft
• Press the washer into place on the shaft until fully seated; verify proper fit and control operation

This replacement door gasket seals the dishwasher door to keep water inside the tub and help maintain wash performance. It restores a tight door seal to reduce leaks and prevent water from pooling around the appliance. What it does:

• Creates a watertight seal between the door and tub to stop leaks during cycles
• Helps prevent water from dripping onto floors and surrounding cabinetry
• Reduces steam and moisture escape that can cause odors or damage
• Restores proper door closure where worn or flattened seals allow seepage

• Disconnect power and water supply before attempting any service.
• Inspect surrounding door edges for damage and clean mounting surfaces before installing the new gasket.
• Press the gasket firmly into the door channel; some models require partial door disassembly.
• After installation, run a short cycle and check for leaks before returning the dishwasher to regular use.

This replacement part is a cooktop burner grate set for gas stoves. The cooktop burner grate set are the pieces that cookware sits on above the burners. Grate sets provide a stable cooking surface for pots and pans.To replace the grate set, simply remove the old grates from the stove. Lift them off and set them to the side. Install the new grates by placing them in their appropriate positions. Once placed properly, make sure they are secure and level on the stove. Place a pan on the grate set to see if it sits evenly on the stove. If so, the installation was a success.This genuine OEM part is compatible with Bosch, Gaggenau, and Thermador gas stoves.