Ngm8055uc Parts

This replacement surface burner head restores even gas distribution and reliable ignition on your cooktop. Replacing a worn or clogged burner helps the flame light quickly, burn evenly, and bring back dependable everyday performance. What it does:

• Channels gas from the orifice through flame ports to create an even, stable flame
• Interfaces with the igniter electrode for consistent, quick lighting
• May resolve delayed ignition, clicking without lighting, weak or uneven flames, or flames that go out
• Replaces corroded, damaged, or persistently clogged burner components

• 1 surface burner head

• Shut off gas supply and power; allow the cooktop to cool completely
• Remove grate and burner cap, then lift off the old burner head
• Clean the orifice area and ensure flame ports are free of debris
• Align the new head with the orifice and igniter, seat fully, reinstall cap and grate, then test operation

The Holder is an OEM part for Bosch cooktops that provides a reliable and efficient ignition process for your cooktop burners. The burner igniter is responsible for generating the spark necessary to ignite the gas coming from the orifice holder. The orifice holder controls the flow of gas from the gas supply to the burner, while the tube connects the orifice holder to the burner head.

A bad holder can lead to issues with burner ignition, such as failure to light or inconsistent sparking. Possible causes of a bad assembly include worn-out igniter electrodes, clogged orifice holders, or damaged tubes.

Symptoms of a bad holder may include:

• Difficulty in igniting the burner
• Inconsistent sparking or weak spark
• Gas smell from the orifice holder 

Replace your faulty holder with this genuine OEM Bosch part to restore your cooktop burners. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This small replacement sealing ring restores a watertight connection in the appliance's fluid or valve fittings, helping prevent leaks and maintain proper operation. Replace worn or damaged rings to stop drips and avoid water-related damage. What it does:

• Forms a seal at pump, valve or hose connections to prevent water leakage.
• Commonly replaced when the ring becomes cracked, brittle, flattened or deformed.
• Symptoms that indicate replacement: visible leaks, pooling under the appliance, or intermittent water flow issues.
• Protects internal components by maintaining a reliable seal and preventing water intrusion.

• Disconnect power and shut off the water supply before starting any repair.
• Inspect mating surfaces and clean away debris or old sealant before installing the new ring.
• Fit the ring evenly without twisting; avoid overstretching or using metal tools that can nick the ring.
• If the original used lubricant, use only manufacturer-recommended lubricants; otherwise install dry.

This set of jets replaces worn or clogged dishwasher spray nozzles to restore proper water distribution and improve cleaning performance. Simple replacement of the nozzles helps maintain even spray coverage across racks. What it does

• Directs water from the spray arm through individual nozzles to reach dishes and remove food soil
• Replaces cracked, clogged, or damaged nozzles that cause poor cleaning or uneven spray patterns
• Helps reduce spotting and leftover residue by restoring designed spray flow
• Compatible with applicable Bosch dishwasher spray arm assemblies

• One set of jets as shown

• Disconnect power to the appliance before servicing; shut off water supply if required
• Remove the spray arm per your model's instructions to access the nozzles
• Use gentle pressure or the recommended tool to remove/install jets to avoid damaging the spray arm
• Run a short test cycle after installation to ensure proper spray operation and check for leaks

This clamp secures flexible hoses and small tubes to fittings, keeping connections tight to help prevent leaks and movement. It's a small replacement clip used on water and drain lines in many appliances. What it does

• Holds a hose or tube firmly to a barb or nipple to maintain a sealed connection
• Helps stop leaks caused by loose or damaged hose connections
• Prevents hoses from slipping off during operation and reduces vibration noise
• Used wherever a small retaining clamp is required on water or drain lines

• One clamp

• Turn off power and shut off water supply before replacing the clamp
• Slide clamp over the hose, push hose fully onto the fitting, then compress or tighten clamp as required
• Use pliers or the correct tool for the clamp type; avoid damaging the hose when installing
• Replace if corroded, cracked, or not seating properly

This cable harness is the factory-style wiring assembly that connects electrical components, making it easier to restore reliable power and signal paths in the appliance. Replaces damaged or frayed harnesses to help resolve intermittent or no-power issues. What it does

• Routes and connects power and control signals between components (connectors included).
• Restores electrical continuity when worn, pinched, or damaged wiring causes failures.
• Common symptoms: appliance won't power on, controls unresponsive, intermittent operation, or visible burned/ frayed wires.
• Helps prevent short circuits caused by exposed conductors when replaced promptly.

• One complete cable harness as shown

• Disconnect all power (unplug or shut off circuit) before starting repairs.
• Label or photograph connector locations before removal to ensure correct reassembly.
• Avoid crushing or kinking the harness; route and secure per original routing to prevent wear.
• Replace with the exact part number to ensure correct fit and connector types.

This retaining washer secures a control shaft or hub to keep components in place during operation, helping restore proper control movement and prevent parts from sliding off the shaft. Simple replacement when a worn or missing retainer causes loose knobs or shifting parts. What it does:

• Fits onto a control or drive shaft to hold a knob, hub or gear in position
• Prevents axial movement that can cause loose or slipping controls
• Commonly replaced when the original washer is bent, cracked, or lost
• Works with compatible Bosch control assemblies and hubs

• One retaining washer

• Recommended for users comfortable with basic appliance disassembly; unplug appliance before starting
• Remove the control knob or panel per model instructions to access the shaft
• Press the washer into place on the shaft until fully seated; verify proper fit and control operation

This replacement door gasket seals the dishwasher door to keep water inside the tub and help maintain wash performance. It restores a tight door seal to reduce leaks and prevent water from pooling around the appliance. What it does:

• Creates a watertight seal between the door and tub to stop leaks during cycles
• Helps prevent water from dripping onto floors and surrounding cabinetry
• Reduces steam and moisture escape that can cause odors or damage
• Restores proper door closure where worn or flattened seals allow seepage

• Disconnect power and water supply before attempting any service.
• Inspect surrounding door edges for damage and clean mounting surfaces before installing the new gasket.
• Press the gasket firmly into the door channel; some models require partial door disassembly.
• After installation, run a short cycle and check for leaks before returning the dishwasher to regular use.

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where the original screw is missing, stripped, or damaged to help keep parts aligned and stable. What it does:

• Fastens panels, brackets, or components to maintain proper alignment and operation
• Replaces a lost, stripped, or damaged screw to prevent rattling or loose parts
• Provides the same basic fastening function as the original hardware
• Suitable where the appliance requires a small machine/tapping screw of the correct size and thread

• One replacement screw

• Use the correct screwdriver or bit to avoid stripping the head
• Start threading by hand to ensure proper engagement before tightening
• Tighten snugly but avoid over-torquing which can strip threads or damage parts
• Disconnect power to the appliance before working on or removing panels where appropriate;

This replacement cable is a direct-replacement wiring harness used to restore electrical connections for the appliance control and components. It provides the needed wiring continuity so controls and sensors can communicate reliably. What it does:

• Reestablishes a secure electrical connection between components and the main control
• Restores signal/power routing when a frayed or damaged wire causes intermittent operation
• Can resolve symptoms such as failure to power on, intermittent cycles, or related error codes tied to wiring faults
• Prevents shorting or poor contact that can lead to inconsistent appliance behavior

• Recommended for technicians or experienced DIYers; disconnect power before replacing
• Verify matching connector shapes and wire colors before installation
• Route the cable away from heat and moving parts to avoid future damage

This hob top is the replaceable glass cooktop surface that restores a flat, stable cooking area and protects internal components from spills and heat. It helps keep burners aligned and the cooktop looking finished. What it does:

• Provides the main glass surface for the cooktop, forming the top of the cooking area
• Protects internal burner assemblies, wiring, and controls from spills and debris
• Restores a smooth, even surface for cookware to sit on after damage or cracking
• Helps prevent heat and moisture from reaching internal components when properly installed

• For safety, disconnect power at the breaker before starting repair
• Handle glass with care; use proper support and protective gloves to avoid breakage and injury
• Follow manufacturer service instructions for removal and reinstallation to ensure proper alignment and sealing

This holder is a small retainer used to secure internal components in place, restoring proper alignment and stopping loose parts from shifting during use. It helps reduce rattling and prevents components from disengaging. What it does:

• Secures and stabilizes a specific internal component or assembly
• Stops rattling and vibration caused by a loose or missing retainer
• Prevents a part from slipping out of position during operation
• Helps restore normal fit and alignment of the affected assembly

• Disconnect power before accessing internal parts
• This part typically snaps or screws into place; inspect surrounding clips and fasteners
• Handle small plastic parts carefully to avoid cracking; replace any damaged adjoining clips