P2s930yp1fs Parts

This bake element assembly replaces a failed oven bottom heating element to restore normal baking and roasting heat. Fits electric ovens that use a separate lower bake element and connects to the oven's element terminals. What it does

• Heats the oven cavity during bake cycles to provide even cooking and browning.
• Replaces a burned-out or visibly broken element that no longer glows when the oven is on.
• Can fix symptoms such as no heat on Bake, undercooked or unevenly baked food, or a visibly damaged element.
• Works as the lower/bake heating element that powers on during standard baking functions.

• One bake element assembly.

• Disconnect power to the appliance before starting any work; lock out or switch off at breaker.
• Removal typically involves accessing the oven cavity, disconnecting the element wires from terminals, and removing mounting screws; follow your oven's service instructions.
• Handle the element carefully to avoid bending or damaging the heating tube; do not install if element is cracked.

This genuine replacement screw secures panels, trim and small components on compatible appliances to restore proper fit and prevent rattling or gaps. Use it when a missing or damaged fastener causes loose or misaligned parts. What it does:

• Fastens panels, bezels, trim pieces and small assemblies to the appliance frame
• Restores secure fit to eliminate rattling, vibration noise or loose trim
• Replaces stripped, rusted or missing screws that prevent proper alignment

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct screwdriver or driver bit to prevent stripping the head
• Tighten securely but avoid over-torquing; excessive force can strip threads or crack plastics
• Keep removed fasteners organized to ensure correct reassembly

This glass touch board assembly replaces the control panel glass and integrated touch sensor board to restore responsive controls and a clean front appearance on compatible ranges and cooktops. It provides a ready-to-install replacement for a damaged or unresponsive control surface. What it does

• Replaces the front glass and touch-sensor circuit used to select functions and set temperatures.
• Restores touch responsiveness when buttons or the control surface fail to register input.
• Replaces cracked, scratched, or cosmetically damaged control glass for improved appearance.
• Helps address intermittent or non-working control inputs caused by a faulty touch board.

• One glass touch board assembly (glass panel with attached touch/control board), quantity: 1

• High-level: Remove power to the appliance before starting; this part installs behind the control bezel and may require removing the backguard or control housing.
• Handle the glass carefully to avoid breakage and wear appropriate hand protection.
• If connectors or screws are tight, do not force; verify alignment before fastening to avoid damage.

This stainless steel panel manifold replaces the damaged or worn front manifold panel on compatible refrigerators, restoring a clean, finished look and proper dispenser/trim fit. Durable metal construction resists everyday wear. What it does:

• Replaces the refrigerator's front manifold panel to restore proper alignment and trim around dispenser or control openings.
• Provides a corrosion-resistant stainless finish to maintain appearance and surface durability.
• Helps stop cosmetic issues like dents, scratches, or loose trim that affect the dispenser area.
• Works with the existing mounting points and trim to retain factory fit and function.

• One stainless steel panel manifold.

• Intended for qualified DIYers; verify model compatibility before ordering.
• Power off and unplug the appliance and turn off water supply before beginning work.
• Handle panel edges carefully to avoid cuts; use proper fasteners and follow OEM fastening sequence.
• Reuse or replace any associated gaskets, clips, or trim pieces only if explicitly listed in model instructions.

The Door Hinge is an OEM part for GE gas ranges. It acts as the pivot point that allows the oven door to smoothly and securely open and close. 

Symptoms of a bad hinge can include wear and tear over time, damage or bending due to excessive force applied while opening or closing the door, or failure of components that assist the door movement.  

Symptoms of a bad door hinge include:

• The door becoming misaligned and no longer closing or sealing properly 
• Difficulty or resistance when opening and closing the door
• Noise or squeaking coming from the hinge area
• Visual signs of damage or bending to the hinge itself

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Stainless Steel Handle is an OEM replacement part for GE electric range models. It provides a sturdy grip for opening and closing the oven door.

Causes of failure include loosened mounting screws from repetitive use, bent or damaged profile from impact, and corrosion affecting appearance.  

Symptoms of a faulty handle include:

• Difficulty smoothly opening and closing the oven door 
• Risk of pinched fingers if handle wobbles during operation
• Degraded aesthetic and value of the appliance over time

This OEM stainless handle also fits select Hotpoint and RCA electric ranges.

This PSC convection motor powers the oven's convection fan to circulate hot air for even cooking and browning. Replacing a worn motor restores proper airflow and helps return convection performance. What it does:

• Drives the oven's convection fan to move and circulate heated air throughout the oven cavity.
• Helps maintain even cooking and consistent browning by promoting uniform temperature distribution.
• Common symptom: convection fan won't run or runs intermittently during convection cycles.
• Common symptom: oven has poor air circulation or uneven cooking when using convection mode.

• One convection motor (PSC) as shown.

• Disconnect power to the appliance before starting any work.
• Handle sheet metal edges carefully; use basic hand tools and reference the oven's service manual for disassembly steps.
• Verify electrical connector and mounting alignment match the original before final installation.

This orifice spud meters gas to a burner, controlling flow for a correct, stable flame. Replace a clogged or damaged spud to restore reliable ignition and proper flame characteristics.

• Threads into the orifice holder to regulate gas flow to the burner head
• Helps maintain proper flame height and shape during cooking
• A clogged or damaged spud can cause weak/uneven flames, yellow tipping, or delayed ignition
• Replacing the spud can improve lighting and flame consistency

• Disconnect power and shut off gas; allow the appliance to cool completely
• Remove grates, caps, and burner heads (as applicable) to access the orifice
• Support the orifice holder while loosening/tightening the spud to avoid twisting the gas tube
• After reassembly, restore gas and check for leaks with an approved leak-detection solution; verify proper burner operation

This small V2 inlet jet directs water flow to the dispenser/ice-making area so the appliance fills and forms properly. It restores correct water routing for consistent filling and helps reduce weak or misshapen ice or slow dispensing. What it does:

• Channels water to the ice maker/dispenser so the correct amount reaches the fill area.
• Helps ensure uniform ice formation and consistent dispenser flow.
• Can resolve symptoms like weak/slow dispensing, underfilled ice trays, or uneven ice cubes.
• Works as the small replacement nozzle where the original inlet jet is worn or blocked.

• One small V2 inlet jet

• Disconnect power and shut off the water supply before beginning work.
• Access may require removing inner panels or the ice maker/dispenser housing; follow your model's service instructions.
• Inspect the seat and surrounding fittings for debris or damage before installing; replace other damaged components as needed.

The Badge Assembly is an OEM part for GE ranges. It includes the magnetic decorative badge affixed to the front of the range. This badge displays important information such as the brand name, model number, and technical specifications.

Causes of a bad badge assembly can include damage from impacts or abrasions over time, adhesive failure from repeated heat exposure, or normal wear from routine cleaning. On a range, the badge must withstand higher cooking temperatures.

Symptoms of a bad badge assembly include:

• Faded or illegible print on the badge face
• Cracks or breaks in the plastic material
• The badge lifting or peeling away from the surface
• Missing or loose attachment clips/fasteners

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The GE Range Support Base is an OEM replacement part for GE wall ovens and ranges. It provides critical support and stability for the appliance, ensuring safe and reliable operation. 

Causes of a bad support base could include cracks or breaks in the material over time due to repeated stresses and strains from the heavy appliance above it. The base may also become damaged or unstable if the unit is moved incorrectly and suffers impact.

Symptoms of a failing support base include:

• The oven or range rocking or becoming unlevel during use  
• Noisy or squeaking sounds coming from the base
• Visible cracks or weaknesses in the material
• The appliance seeming loose or unstable on the countertop or floor

This genuine GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This high-voltage electrodes and harness assembly replaces the ignition electrode wiring used to deliver spark to burners. It restores reliable spark delivery so the cooktop or range can light safely and consistently. What it does:

• Carries high-voltage ignition from the module to the burner electrodes to create the spark
• Replaces cracked, corroded, or damaged electrode wires that cause weak or no spark
• Stops continuous clicking or intermittent ignition when worn or shorted
• Helps ensure proper spark routing and spacing for consistent ignition

• Disconnect electrical power and, if applicable, gas supply before servicing
• Handle electrodes and porcelain insulators carefully to avoid damage
• Route harness and seat connectors per OEM routing; ensure secure, snug electrical connections
• Test ignition operation after installation and restore power/gas only when safe

This rotary switch is the user-control selector that lets you choose settings on your appliance and restores responsive, consistent control when the original switch is worn or malfunctioning. It provides a direct replacement that matches OEM fit and function. What it does:

• Selects the appliance control position (temperature/speed/setting) as you turn the knob
• Restores reliable electrical contact when the original switch has intermittent operation or unresponsive detents
• Stops erratic or non-functioning controls caused by worn contacts or broken selector mechanism
• Re-establishes safe, repeatable control positions for normal appliance operation

• One rotary switch

• Disconnect power to the appliance before starting any repair
• Access may require removing the control panel or console; handle panel clips and trim carefully
• Take care with terminals and wiring; note original connections or photograph before disconnecting

This tangential blower circulates air across oven/microwave components to help cool electronics and maintain proper airflow. Replaces a worn or failed blower to restore cooling and reduce overheating risks. What it does:

• Moves air along the appliance's internal components to help dissipate heat
• Helps prevent overheating of control electronics and nearby parts
• Can stop whining or rattling noises when a worn fan is replaced

• One tangential blower assembly

• Disconnect power to the appliance before starting any repair
• Follow the appliance manufacturer's service instructions and wiring diagrams
• Handle with care around sharp sheet metal and fragile components

This glass and touch board assembly replaces the front control glass and capacitive touch interface to restore a stove/oven's control panel appearance and responsive touch control. Ideal for cracked glass, unresponsive touch keys, or cosmetic damage. What it does:

• Provides the glass surface and integrated touch sensors for the cooktop/oven control panel.
• Restores touch-key input so oven functions and settings can be selected from the front panel.
• Replaces cracked, scratched, or delaminated glass that affects appearance or use.
• Interfaces with the oven's main control electronics through the original connector.

• One glass and touch board assembly.

• Disconnect power (unplug or switch off breaker) before servicing to avoid shock or damage.
• Handle glass carefully to avoid cuts; use padded surfaces and proper tools when removing mounting screws.
• Remove or label electrical connectors and mounting hardware during disassembly to ensure correct reassembly.