Pdt285jj2ss Parts

This outer door panel is the stainless-profile front surface that restores a dishwasher's appearance and protects internal door components. It replaces a dented, scratched, or corroded outer door to return the appliance to a finished look. What it does:

• Replaces damaged or dented outer door surface to restore appearance
• Protects inner door components from moisture and impact
• Provides the finished stainless-profile exterior for proper alignment with controls and trim
• Helps eliminate vibration or rubbing caused by a warped outer panel

• Disconnect power to the appliance before beginning any repair
• Removal typically requires opening the door and removing screws/fasteners; support the door to avoid dropping
• Handle edges carefully; metal panels can be sharp

This flexible silverware bellow seals and guides water flow around the dishwasher silverware basket, helping maintain proper spray circulation and keeping utensils contained for more consistent cleaning results. What it does:

• Replaces a torn or worn bellow that can allow utensils to block spray or shift during a cycle
• Helps direct wash water into the silverware area for more even cleaning
• Prevents small items from falling through gaps beneath the basket
• Reduces the chance of debris collecting where the basket meets the tub

• Disconnect power to the appliance before attempting any service.
• Typically snaps or slides into place; remove the silverware basket for access.
• Inspect surrounding gaskets and the basket for damage; replace if worn.

This dielectric shield is a small heat-resistant insulator that protects ignition wiring and components from heat and prevents electrical arcing near burners. It helps maintain reliable spark ignition and reduces risk of shorts or damage from high temperatures. What it does:

• Shields spark module wires and electrode areas from direct heat exposure
• Helps prevent arcing and electrical shorts that can interrupt ignition
• Reduces risk of melted or damaged wire insulation near burners or ovens
• Commonly replaced when cracked, deformed, or showing burn marks that affect ignition

• Disconnect power (and gas if applicable) before servicing electrical or ignition components
• Inspect surrounding wiring and connectors; replace any damaged insulation or terminals
• Reinstall using original mounting hardware and ensure the shield fully covers the wire/electrode area

This rear third-rack end cap replaces the plastic end piece that secures the dishwasher's third rack to its track, restoring proper alignment and smooth sliding. Ideal for replacing cracked, broken, or missing rear end caps. What it does:

• Secures the third rack to the rear track so the rack stays aligned during use
• Provides a smooth contact point for the rack to slide on and reduces binding or catching
• Replaces cracked, broken or missing rear end caps that can cause rack drift or instability
• Common symptoms this part can fix: rack falls off track, rear rack sits unevenly, scraping or rough movement when sliding the rack

• Disconnect power to the dishwasher before beginning repairs for safety
• Pull the third rack out to access the end cap; remove the old cap and snap the replacement into place
• No special tools are typically required; a flat screwdriver can help if the old cap is stuck
• After installation, slide the rack in and out a few times to ensure secure fit and smooth movement

This adjustable leveling leg replaces a single worn or damaged foot to stabilize and level your appliance. It restores proper appliance balance to reduce rocking, vibration, and uneven operation. What it does

• Provides an adjustable support point to level the appliance on uneven floors
• Helps stop rocking, minimize vibration and reduce noise during cycles
• Restores correct appliance height so doors and panels close correctly
• Useful when an original leg is stripped, bent, or missing

• One adjustable leveling leg

• Unplug or disconnect power before working on the appliance; follow all safety precautions
• Tip or raise the appliance per manufacturer guidance to access and remove the old leg
• Screw in the replacement leg and adjust height until the appliance sits level; check with a bubble level
• Do not overtighten; ensure all legs bear weight evenly before returning appliance to service

This sump assembly collects and directs wash water to the pump so your dishwasher can drain and circulate properly. Replacing a damaged sump restores proper water flow and helps stop leaks or drainage failures. What it does:

• Houses and channels wash water from the tub to the drain/pump assembly
• Seals the tub bottom to prevent leaks caused by cracks or worn seals
• Enables the pump to maintain proper circulation and pressure for cleaning
• Resolve symptoms like water leaking under the dishwasher, failure to drain, or unusual pump noise

• Disconnect power to the appliance and shut off the water supply before beginning
• Installation typically requires removing the lower access panel and possibly the tub/shield; handle parts gently to avoid damaging seals
• Inspect and replace any gaskets or clamps as needed to ensure a watertight seal
• Test the dishwasher through a short cycle and check for leaks after installation

This right-side door trim is a factory-style replacement that restores the finished edge and appearance of the appliance door. It covers the door edge and trim mounting area for a clean, factory look. What it does

• Replaces cracked, chipped or worn right-side door trim to restore appearance
• Covers and protects the door edge and trim fasteners from dirt and damage
• Helps maintain the door's finished look after impacts or wear
• Fits into existing trim mounting points for a direct replacement

• High-level replacement only; follow for disassembly steps
• Remove any contents from the door and move shelves as needed for clearance
• Use proper tools to remove fasteners or trim clips; avoid forcing the trim to prevent damage

This pump isolator hanger cushions and secures the washer drain pump to reduce vibration and noise while keeping the pump properly positioned for reliable water flow. Replaces worn or broken hangers to restore stable pump mounting. What it does

• Cushions the drain pump to reduce vibration and rattling during spin and drain cycles
• Keeps the pump aligned to prevent rubbing, misalignment noise, or premature wear
• Helps maintain a secure pump connection to reduce movement that can lead to leaks
• Used when hanger is cracked, torn, missing, or allowing excessive pump movement

• One pump isolator hanger (single piece as shown)

• Disconnect power and turn off water supply before starting any repair
• Drain remaining water from the washer and access the pump per your model's service instructions
• Inspect surrounding mounting tabs and fasteners; replace any damaged hardware

This kit contains the screws and matching plug buttons used to secure and finish a countertop installation, restoring a clean, secure fit and covering screw heads for a finished look. What it does:

• Provides the correct screws to fasten the countertop to the cabinet or appliance frame
• Includes plug buttons to conceal screw heads for a neat appearance
• Helps stop loose or rattling countertops by replacing worn or missing fasteners
• Matches OEM fit and fastening locations when original parts are missing or damaged

• Use proper driver bits to avoid stripping screw heads; hand-start screws to ensure correct alignment
• Keep plastic plug buttons away from heat sources during installation

The Lower Spray Arm Base is an OEM replacement part for GE dishwashers. It serves as the mounting point inside the lower basket for the lower spray arm assembly to attach. Proper positioning of the spray arm base allows for uniform water coverage on the dishes below. 

Causes of a faulty spray arm base include cracks, deterioration, or breaks in the plastic mounting features from repeated cycle use.  

Symptoms of an improper or defective spray arm base are:

• Loose or unstable lower spray arm assembly
• Uneven cleaning results on lower basket dishes
• Leaks around the lower spray arm area
• Chipped or degraded plastic appearance

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This top attachment strip secures the appliance's top panel and provides the mounting point for the door strike, restoring a stable, properly aligned front. It prevents panel movement and reduces rattles for a snug fit and reliable door engagement. What it does:

• Secures the top/front panel to the cabinet to maintain alignment and fit
• Serves as the mounting point for the door strike or latch components
• Helps eliminate rattling, vibration, and gaps at the top of the door area
• Restores reliable door engagement and prevents the strike from shifting

• Disconnect power to the appliance before beginning any repair
• Remove the top panel or access screws to reach the attachment strip; a screwdriver set is typically required
• Handle mounting tabs and edges carefully to avoid bending or damage
• Verify alignment of the door strike and test door closure after installation

This LED board provides the replacement lighting for a refrigerator control/dispenser panel, restoring illumination and visibility to the user interface. It replaces a failed or dim panel light for clearer display feedback. What it does:

• Illuminates the control or dispenser panel so buttons and indicators are visible
• Replaces flickering, dim, or non-functioning panel LEDs
• Helps restore normal panel appearance and user feedback
• Works as the plug-and-play lighting module for compatible control housings

• One LED board

• Disconnect power to the appliance before starting any repair
• Remove the control/dispenser trim per manufacturer instructions to access the board
• Handle the board by its edges and avoid touching LED lenses or contacts
• Reconnect all wiring harnesses securely and test lighting before reassembling trim

This discharge hose routes drained water from the washer's pump to the household drain, restoring normal draining and stopping leaks when the original hose is worn or damaged. Easy direct replacement for a failing or split hose. What it does:

• Channels wastewater from the washer pump to the home drain to allow complete draining.
• Replaces cracked, split, or hardened hose that can cause leaks or water on the floor.
• Helps resolve slow or incomplete draining when the pump and hose are otherwise functional.
• Works with existing pump and clamp connections when correctly installed.

• One drain pump discharge hose

• Disconnect power and turn off the water supply before starting; follow all safety precautions.
• Drain residual water from the washer and remove clamp(s) securing the old hose to the pump and drain port.
• Fit new hose onto pump outlet and drain connection, then secure with proper clamps; ensure routing avoids sharp bends or pinch points.
• After installation, restore power/water and run a short drain cycle to check for leaks.

This upper rack assembly replaces a worn or damaged dishwasher upper rack to securely hold cups, glasses and small dishes for normal cleaning. It restores proper support and alignment for top-rack loading. What it does:

• Provides the upper-level rack platform to hold cups, glasses, small plates and dishwasher-safe items
• Restores proper rolling and tracking when the rack is pushed in and pulled out
• Helps prevent dishes from shifting or tipping during the wash cycle
• Addresses symptoms like bent or broken rack frame, missing mounting points, or a rack that won't roll smoothly

• Disconnect power and shut off water to the appliance before starting any repair
• Remove the lower rack and any obstructing items, then slide out the upper rack to access mounting clips or rails
• Reinstall carefully so the rack tracks engage properly; check for smooth operation before use
• If rack wheels or clips are damaged, inspect and replace those components as needed

This replacement screw fastens and secures appliance components where a 1/4-28 threaded flange screw with an internal hex washer head is required. It restores proper fit and helps prevent movement or rattling of panels and assemblies. What it does:

• Secures panels, brackets and components that use a 1/4-28 threaded flange screw
• Internal hex washer head allows a compact, low-profile drive for tight spaces
• Helps stop looseness, vibration noise, and misalignment when the original fastener is missing or worn
• Matches OEM fit and fastening form for reliable reassembly

• Disconnect power and follow all appliance safety procedures before servicing
• Use the correct hex driver/socket to avoid stripping the head
• Tighten to snug fit—do not overtighten to avoid damaging threads or mating parts
• Replace with identical part number to ensure proper fit and function

This rubber tub gasket creates a watertight seal between the tub and door opening to help prevent leaks and maintain proper drum/door contact. It replaces a worn or damaged seal to restore reliable operation. What it does:

• Seals the tub/door interface to help stop water leaks during cycles
• Keeps laundry and drum area contained, helping prevent water damage
• Reduces rubbing and vibration caused by a cracked or deformed seal
• Helps limit lint and debris from escaping the wash tub

• One tub gasket

• Disconnect power and turn off the water supply before starting any work
• Typical installation may require removing the door or front panel and repositioning the gasket into the tub groove
• Inspect the sealing surface for damage or residue and clean before installing the new gasket