Pdt285jj2ss Parts

This upper rack assembly replaces a worn or damaged dishwasher upper rack to securely hold cups, glasses and small dishes for normal cleaning. It restores proper support and alignment for top-rack loading. What it does:

• Provides the upper-level rack platform to hold cups, glasses, small plates and dishwasher-safe items
• Restores proper rolling and tracking when the rack is pushed in and pulled out
• Helps prevent dishes from shifting or tipping during the wash cycle
• Addresses symptoms like bent or broken rack frame, missing mounting points, or a rack that won't roll smoothly

• Disconnect power and shut off water to the appliance before starting any repair
• Remove the lower rack and any obstructing items, then slide out the upper rack to access mounting clips or rails
• Reinstall carefully so the rack tracks engage properly; check for smooth operation before use
• If rack wheels or clips are damaged, inspect and replace those components as needed

This replacement screw fastens and secures appliance components where a 1/4-28 threaded flange screw with an internal hex washer head is required. It restores proper fit and helps prevent movement or rattling of panels and assemblies. What it does:

• Secures panels, brackets and components that use a 1/4-28 threaded flange screw
• Internal hex washer head allows a compact, low-profile drive for tight spaces
• Helps stop looseness, vibration noise, and misalignment when the original fastener is missing or worn
• Matches OEM fit and fastening form for reliable reassembly

• Disconnect power and follow all appliance safety procedures before servicing
• Use the correct hex driver/socket to avoid stripping the head
• Tighten to snug fit—do not overtighten to avoid damaging threads or mating parts
• Replace with identical part number to ensure proper fit and function

This rubber tub gasket creates a watertight seal between the tub and door opening to help prevent leaks and maintain proper drum/door contact. It replaces a worn or damaged seal to restore reliable operation. What it does:

• Seals the tub/door interface to help stop water leaks during cycles
• Keeps laundry and drum area contained, helping prevent water damage
• Reduces rubbing and vibration caused by a cracked or deformed seal
• Helps limit lint and debris from escaping the wash tub

• One tub gasket

• Disconnect power and turn off the water supply before starting any work
• Typical installation may require removing the door or front panel and repositioning the gasket into the tub groove
• Inspect the sealing surface for damage or residue and clean before installing the new gasket

This replacement rack handle provides a sturdy grip for sliding a dishwasher rack in and out, restoring smooth access and safe loading. It replaces a broken or missing handle so racks are easier to pull. What it does:

• Attaches to the front of a dishwasher rack to provide a grip for pulling the rack in and out.
• Restores lost leverage from a cracked or missing handle so dishes load and unload more easily.
• Helps keep the rack aligned when sliding to prevent tipping or catching.
• Fits the original mounting points; use this when the existing handle is damaged or worn.

• One replacement dishwasher rack handle.

• Remove the rack and empty dishes before replacing the handle to avoid damage or injury.
• Inspect the rack clips or mounting tabs and line up the handle before snapping or fastening into place.
• Use basic hand tools if screws or clips are present; avoid force that could bend the rack.
• No specialized electrical safety steps are required, but follow your appliance manual for any model-specific guidance.

This DC harness is a factory-style replacement wire harness that connects control and power circuits to the appliance's DC motor/control assembly, restoring reliable electrical connection and component operation. What it does:

• Carries power and signal between the control board and the DC motor/control assembly
• Replaces damaged or broken wiring that can cause intermittent operation or loss of function
• Helps eliminate issues like unresponsive controls or motor that won't run when wiring is the cause
• Maintains correct connector fit and circuit routing when installed as intended

• Disconnect power to the appliance before beginning any repair to avoid shock hazard
• Compare connectors and wire routing to the original harness to ensure proper fit and length
• Handle connectors gently; do not force pins or terminals into misaligned sockets
• If the harness shows heat damage, exposed conductors, or melted insulation, replace the entire harness rather than attempting a partial repair

This lower spray arm circulates and directs wash water to clean dishes on the bottom rack, restoring spray coverage and helping improve cleaning performance. Easy to replace when the original arm is cracked, clogged, or not rotating. What it does:

• Directs pressurized water across the lower rack to remove food soil and detergent residue
• Replaces cracked, warped, clogged, or broken lower spray arms that reduce cleaning coverage
• Restores proper rotation and spray pattern when the original arm is not spinning or is leaking
• Helps reduce spotting and missed areas caused by uneven water distribution

• Always disconnect electrical power to the dishwasher before servicing.
• Remove the lower rack to access the spray arm; follow OEM removal steps for retaining nut or clip.
• Inspect the spray arm mounting post and bearing for debris before installing the new arm.
• Hand-tighten fittings and run a short rinse cycle to confirm proper rotation and sealing.

This drain pump hanger secures the washer's drain pump to the outer tub, keeping the pump and hoses aligned so the pump can remove water reliably. Use it to replace a cracked or broken support that lets the pump shift. What it does

• Holds the drain pump firmly in place and maintains proper pump alignment.
• Helps reduce pump vibration and noise from a loose or mispositioned pump.
• Prevents the pump from pulling on hoses or becoming dislodged during the spin/drain cycle.
• A worn or broken hanger can contribute to poor draining, intermittent drainage, or unusual pump noise.

• One drain pump hanger.

• Disconnect power to the washer before beginning any repair.
• Access typically via the washer's lower front or rear panel; follow for disassembly.
• Inspect and reuse mounting hardware and grommets if undamaged; replace if corroded or broken.

This left-side door trim piece restores the exterior appearance and proper fit of a damaged or worn appliance door. It replaces cracked, chipped, or loose trim to help the door close and sit correctly in the frame. What it does:

• Covers and protects the left edge of the door while providing a finished appearance
• Replaces cracked, broken, or cosmetically damaged trim
• Helps maintain correct alignment of the door edge and attachment points
• Secures to the door with factory mounting tabs or screws
• Useful when left-side trim has snapped, warped, or come loose

• One left side door trim

• Disconnect power and/or fuel supply before beginning any repair
• Use appropriate hand tools; support the door to prevent dropping or damage
• Inspect mounting tabs and nearby components; replace any broken fasteners
• Follow the appliance service manual for disassembly and torque/spec guidance

This housing bottom is the lower cabinet section that supports internal dryer components and helps channel airflow. It restores structural support and proper airflow path for safe, efficient dryer operation. What it does

• Provides a stable mounting surface for the blower, motor base, and other lower-chassis components
• Helps direct airflow from the drum to the blower and vent, supporting proper drying performance
• Replaces cracked or damaged lower housing that can cause vibration, rattling, or rubbing noises
• Prevents gaps that could allow lint buildup near motor/blower areas and reduce airflow

• One housing bottom

• Recommended for technicians or experienced DIYers; unplug the appliance and disconnect power before starting
• Remove the dryer cabinet and follow OEM disassembly steps to avoid damaging wiring, seals, or nearby components
• Inspect adjacent parts (blower wheel, mounts, seals) and replace any worn items while the cabinet is open
• Test appliance after reassembly to ensure proper fit, airflow, and that any noises or vibration are resolved

This LED board harness is the factory-style wiring harness that connects the refrigerator's LED light board to the cabinet power and controls, restoring reliable lighting and signal connections. It helps fix lighting failures and intermittent LED operation. What it does:

• Provides the electrical connection between the LED light board and the appliance power/control circuits
• Replaces damaged, corroded, or broken harnesses that cause lights to stay off or flicker
• Ensures secure plug-to-board mating to prevent intermittent lighting or loss of LED function
• Maintains original routing and connector fit for proper installation and operation

• One LED board harness

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Handle connectors and wiring gently; avoid pulling on wires—disconnect at the plugs
• May require removing light housing or control panel for access; keep track of fasteners and routing
• If connectors are damaged at the board or mating harness, inspect both sides and replace as needed

This AC harness is the wiring assembly that connects the air conditioning system's electrical components, providing organized power and signal routing for reliable operation. Replaces worn or damaged harnesses to restore proper electrical connections. What it does:

• Routes power and low-voltage signals between A/C components (compressor, fan, controls) for coordinated operation
• Helps prevent intermittent faults caused by loose, frayed, or corroded wires
• Can resolve symptoms such as the A/C not starting, intermittent compressor or fan operation, or blown fuses
• Maintains correct connector fit and wire routing to reduce stress on terminals

• One AC wire harness

• Turn off power at the breaker and confirm zero voltage before servicing
• Match connectors and wire colors; secure harness along original routing to avoid heat or moving-part damage
• Inspect connector terminals and mating components for corrosion—clean or replace as needed

This user-cleanable fine filter and basket keeps dishwasher wash water free of food particles for better cleaning and fewer clogs. Replace a damaged or clogged filter assembly to restore proper draining and improve cycle performance. What it does:

• Traps food and debris in the fine mesh basket to prevent recirculation and pump blockages
• Helps maintain spray arm performance and consistent wash results
• Reduces risk of drain clogs and dishwasher odors from trapped solids
• Common symptom fix: dishwasher leaves food on dishes, has reduced wash performance, or shows an error tied to circulation/drain issues

• Follow manufacturer instructions; remove power before servicing dishwasher
• Clean surrounding area before installing to ensure a proper seal and fit
• Inspect for damage to mounting tabs/gaskets and replace if needed

This control box bottom is the lower housing that protects and supports the appliance's control electronics, helping keep wiring and components secure from debris and moisture. Fits into the control assembly to restore proper enclosure and support. What it does:

• Provides a protective lower enclosure for the control board and wiring harness
• Helps keep dust, lint and moisture away from sensitive electronics
• Secures the control board and related connectors in their correct position
• Prevents rattling or movement that can cause loose connections or noise

• One control box bottom (base cover) as pictured

• Disconnect power before servicing to avoid shock or component damage
• Handle electronics carefully and avoid touching circuit contacts
• Installation typically requires basic hand tools and removal of the control housing

This sump port plug seals the washer's sump/drain opening to stop leaks and keep internal components protected. It restores a watertight closure at the sump port so the appliance can operate without water escaping. What it does:

• Seals the sump or drain port to prevent water leaks from the washer tub area
• Helps maintain proper water containment during fill and wash cycles
• Keeps debris and contaminants out of the sump cavity
• Useful when replacing a damaged, cracked, or missing sump port cap

• One sump port plug

• Designed to press/seat into the sump port; verify seating for a snug, leak-free fit
• Inspect mating surface for debris or damage before installing to ensure a proper seal
• Disconnect power and water supply before accessing internal components