Pdt285jj2ss Parts

This sump port plug seals the washer's sump/drain opening to stop leaks and keep internal components protected. It restores a watertight closure at the sump port so the appliance can operate without water escaping. What it does:

• Seals the sump or drain port to prevent water leaks from the washer tub area
• Helps maintain proper water containment during fill and wash cycles
• Keeps debris and contaminants out of the sump cavity
• Useful when replacing a damaged, cracked, or missing sump port cap

• One sump port plug

• Designed to press/seat into the sump port; verify seating for a snug, leak-free fit
• Inspect mating surface for debris or damage before installing to ensure a proper seal
• Disconnect power and water supply before accessing internal components

This vent cover replaces a damaged or missing dryer exhaust cover to restore a clean appearance and proper airflow at the dryer vent opening. It helps keep lint and debris out while maintaining the dryer's exhaust path. What it does

• Covers and protects the dryer exhaust opening from debris and pests.
• Directs exhaust airflow away from the cabinet for safer operation and improved venting.
• Replaces cracked or broken louvers that allow visible gaps or reduced protection.
• Restores the appliance's finished look at the vent opening.

• Disconnect the appliance from power (and gas, if applicable) before servicing.
• Access may require removing an exterior trim or vent plate; a screwdriver is commonly needed.
• Handle edges carefully and align mounting tabs or screw holes before fastening.
• If venting issues persist after installation, inspect the full vent path and lint trap.

This replacement refrigerator door handle restores a secure grip and clean appearance to your fridge. It matches the factory shape and mounting points so the door opens and closes smoothly. What it does

• Replaces a cracked, loose, or broken refrigerator door handle
• Provides a secure grip for opening and closing the door
• Restores original fit and alignment to prevent rubbing or gaps
• Helps maintain the appliance's finished appearance

• Disconnect power to the appliance or open/lock the door per manufacturer safety instructions before servicing
• Handle typically installs with screws or clips at the door; hold the handle steady while fastening to avoid stripping
• Inspect door liner and gasket for damage while handle is removed

This leak pan is the factory replacement drip/overflow tray that catches and channels unwanted water away from the appliance to help prevent damage to floors and cabinetry. Fits where the original pan collected condensation or small leaks. What it does:

• Catches water from minor leaks, condensation, or defrost drain overflow
• Directs collected water to the appliance drain path or containment area
• Helps prevent water from reaching flooring and cabinetry
• Common symptom: water pooling under or around the appliance

• Disconnect power and water supply before beginning any service
• Access typically requires removing the appliance kickplate or lower access panel
• Inspect and clear associated drain lines and gaskets while replacing the pan

This inlet fill hose routes household water from the supply to the appliance so it fills normally. Replaces a damaged, leaking, or kinked hose to restore reliable water flow and stop visible leaks during cycles. What it does:

• Connects the cold/hot water supply to the washer's water inlet valve or dispenser
• Restores proper water flow when the original hose is cracked, split, or leaking
• Helps prevent flooding and water damage from worn or burst hoses
• Reduces low-fill or no-fill symptoms caused by collapsed or obstructed hoses

• One fill hose as shown

• Turn off electricity and shut off the water supply before starting
• Disconnect supply lines and drain residual water into a towel or bucket
• Hand-tighten fittings and check for leaks; avoid overtightening metal-to-metal
• Inspect and replace any worn washers or clamps; test with a short fill cycle after installation

This fill funnel hose directs incoming water from the inlet area into the washer tub to prevent splashing and misdirected flow. It helps maintain proper water routing for reliable fills and reduces chances of internal leaks. What it does:

• Guides incoming water from the fill/inlet area into the tub to avoid spraying or pooling
• Helps prevent water from entering cabinet areas or dripping onto components
• Can resolve symptoms like water spraying near the top of the tub, water pooling under the washer, or irregular fill routing
• Works with the washer's inlet/fill assembly to keep fill flow focused and controlled

• One fill funnel hose

• Disconnect power and shut off water supply before starting any repair
• Replace only with the exact part number shown;
• Inspect nearby fittings, clamps, and seals and replace if damaged to ensure a watertight connection