Pdt285jj2ss Parts

This white door handle assembly replaces a broken, cracked or loose refrigerator door handle to restore a secure grip and clean appearance. Fits compatible GE refrigerators and installs in place of the original handle assembly. What it does:

• Provides a secure, ergonomic grip for opening and closing the refrigerator door
• Replaces broken, cracked or loose handles that affect door operation or appearance
• Restores proper handle alignment so the door opens smoothly
• Helps prevent further damage from using a compromised handle

• Remove food and any items from the door; support the door while working to avoid strain or damage
• Use common hand tools (screwdriver, socket) to remove mounting screws and transfer any trim or mounting hardware as needed
• Keep original screws and clips unless the new assembly explicitly includes replacements

This handle bracket secures the appliance handle to the door or front panel, restoring a firm, reliable grip and preventing the handle from wobbling or detaching during normal use. Ideal for replacing a cracked, bent, or loose bracket. What it does

• Provides a stable mounting point for the appliance handle so the handle stays firmly attached
• Replaces worn, cracked, or broken brackets that cause a loose or sagging handle
• Helps stop rattling or shifting when opening and closing the door
• Restores proper alignment and fit of the handle assembly

• One handle bracket

• Disconnect power (and gas if applicable) before beginning any repair
• Installation typically requires removing the handle and/or inner door panel and fastening the bracket with screws or clips
• Keep track of small fasteners and work on a soft surface to avoid scratching finish

This tub trim piece covers the washer tub edge to restore a finished appearance and help protect clothes from snagging. It replaces worn or damaged trim that can expose the drum edge. What it does:

• Covers and protects the exposed tub/drum rim to reduce fabric snags and wear
• Restores a finished look to the washer opening for improved aesthetics
• Helps maintain the seal interface between the door and tub perimeter
• Prevents dirt buildup in the exposed gap at the tub edge

• Disconnect power (and water if applicable) before beginning work
• Remove the door or front panel as needed per your model's service instructions
• Align the trim carefully and snap or fasten into place without forcing

This tub trim piece secures and finishes the washer tub opening, keeping the cabinet gap sealed and improving the door seal appearance. It replaces a worn or cracked tub trim to help reduce water spray and maintain a proper fit. What it does:

• Covers and seals the tub opening edge to help prevent water from escaping around the door
• Reestablishes a smooth mounting surface for the door boot/gasket and outer assembly
• Addresses visible damage like cracks, dents or missing trim that can catch laundry
• Helps reduce rubbing or chafing of the door seal caused by a damaged tub edge

• One tub trim piece

• Designed for repair-level replacement; remove power and disconnect water before starting
• Basic trim removal may require removing the door boot/gasket and outer front panel; follow your model's service instructions
• Inspect surrounding seal and fasteners; replace any damaged clips or screws

This tub trim ring restores the finished edge around the washer tub opening for a clean, secure fit and appearance. It replaces cracked or missing trim that can catch clothing or make the top look worn. What it does:

• Covers and protects the tub opening edge to prevent clothes from catching on the tub lip
• Restores the washer's finished appearance after damage or wear
• Helps maintain proper fit against the cabinet and lid area
• Reduces chances of visible gaps or rubbing during load agitation

• Turn off power to the appliance before starting any repair
• You may need to open or remove the washer top or access panel to reach and replace the trim
• Handle the trim carefully — edges can be sharp and clips can be brittle on older machines
• If clips or mounting hardware are broken, inspect and replace them as needed

This lens and adhesive assembly replaces a worn, cracked, or cloudy control/display lens and secures the lens to the appliance for a clean, finished appearance and protected electronics. Restores visibility and prevents debris entry behind the lens. What it does:

• Replaces a damaged or discolored control/display lens to improve visibility and aesthetics
• Includes adhesive to secure the lens and maintain a sealed fit over controls or indicators
• Protects underlying buttons, LEDs, and circuit components from dust and moisture
• Helps restore original appearance after impact, cracking, or peeling

• Disconnect power before servicing to avoid shock or unintended appliance operation
• Clean and dry mounting surface; remove old adhesive residues for proper adhesion
• Align lens carefully, press into place, and hold per adhesive manufacturer recommendations
• Allow adhesive to set fully before reconnecting power or using the appliance

This shield wash pump circulates dishwasher wash water so dishes get cleaned and rinsed effectively. Replaces a failed or noisy pump to restore normal wash performance and water movement inside the tub. What it does:

• Circulates wash and rinse water through the spray arms for proper cleaning and rinsing
• Helps maintain consistent water flow and pressure during the wash cycle
• Reduces loud noise or grinding when a worn pump or motor is replaced
• Commonly replaced when the dishwasher pauses mid-cycle, won't complete cycles, or leaks from the pump area

• One complete shield wash pump assembly (pump with motor and mounting shield as shown)

• Recommended for users comfortable with appliance disassembly; disconnect power and water before starting
• Inspect seals and mounting gaskets and replace if worn to prevent leaks
• Tighten hose clamps and check hose routing during reassembly to avoid kinks or stress

This tub-mount gasket seals and cushions the washer tub where it mounts to the cabinet, helping prevent leaks and reducing vibration for quieter operation. It restores a proper seal to keep water contained inside the washer tub. What it does

• Creates a water-tight seal at the tub mounting point to help stop leaks.
• Cushions the tub and reduces noise and vibration during spin cycles.
• Helps maintain proper alignment between the tub and cabinet.
• Use when you see water pooling near the base, leaks from the tub area, or increased vibration/noise.

• Disconnect power and water supply before starting any repair.
• Drain the washer and remove panels as required for access.
• Inspect the mounting surface for damage or debris; clean before installing the new gasket for a proper seal.
• After installation, run a short cycle to check for leaks and proper operation.

This front handle cover replaces the worn or damaged trim around the appliance's front handle to restore a finished appearance and provide a secure grip when opening the door. It's a direct-fit exterior trim piece. What it does:

• Covers and protects the front area around the door handle for a clean, finished look
• Restores proper handle appearance and helps prevent sharp edges or loose trim
• Helps maintain a secure grip when opening the door
• Commonly replaced for cosmetic damage, cracks, or loose/broken trim pieces

• One front cover handle/trim piece as shown

• High-level cosmetic part; installation typically requires accessing screws or clips on the appliance front panel
• Power off and unplug the appliance before attempting removal or installation
• Keep small screws and clips organized during reassembly; do not force parts to avoid breakage

This front cover handle replaces the worn or broken exterior handle cover to restore a clean appearance and provide a secure grip for opening the appliance door. It's a direct-fit exterior cosmetic and functional trim piece. What it does:

• Replaces a cracked, faded, or missing front handle cover to improve door grip and appearance
• Provides a stable surface to pull or open the appliance door safely
• Helps prevent sharp edges or loose trim that can catch clothing or fingers
• Restores the original fit-and-finish of the appliance front

• One front cover handle

• Designed for drop-in/bolt-on replacement — follow OEM disassembly instructions for trim removal
• Power off and unplug the appliance before starting any repair
• Keep screws and fasteners organized during disassembly; use recommended tools to avoid damage

This rear cover handle replaces a worn or broken handle on the appliance's rear access cover, restoring safe access for service panels and improving handling. Designed to match the OEM fit for a secure, durable replacement. What it does:

• Secures the rear access cover so service panels stay closed during normal use
• Restores a broken, cracked or loose handle that's hard to grip
• Helps prevent accidental panel opening and keeps internal components protected
• Fits in the factory mounting locations for a straightforward replacement

• One rear cover handle

• Disconnect power to the appliance before starting any service
• Handle installs at the rear access cover using the factory fasteners; reuse existing hardware only if undamaged
• If any mounting tabs or screws are damaged, replace them before operating the appliance

This front foam diverter directs and channels detergent suds and rinse water inside the washer to help ensure proper detergent flow and consistent cleaning. A direct-fit replacement that restores correct foam routing in the dispenser area. What it does:

• Redirects foam and rinse water away from sensitive dispenser openings
• Helps prevent excess suds from disrupting cycle performance or leaving residue
• Restores intended detergent flow for more consistent wash and rinse results
• Fits into the dispenser assembly to maintain proper internal water paths

• One front foam diverter

• Disconnect power and turn off water supply before starting repairs
• Typically installs by snapping or sliding into the dispenser assembly; small fasteners or clips may need removal
• Verify correct orientation and secure clip engagement to avoid leaks or misalignment

Left-hand door trim that restores the finished edge and appearance of the refrigerator door. Replaces cracked, dented, or missing trim to improve the door's cosmetic look and help maintain a proper seal area. What it does:

• Replaces the left-hand exterior door trim piece to restore the door's finished appearance and cover exposed edges.
• Helps protect the door edge from chips, scratches, and impact damage that cause visible wear.
• Addresses symptoms like cracked, warped, loose, or missing trim that create rough edges or an unfinished look.

• May require basic hand tools and removal of adjacent trim, gasket, or fasteners—follow the OEM service instructions for your model.
• If repair work exposes wiring, switches, or controls, disconnect power before starting.
• Handle trim edges and clips carefully to avoid damage; keep original fasteners and clips for reuse when possible.

This upper dishwasher rack replaces the top loading rack to securely hold glasses, cups and small items so they clean and dry properly. Restores stable support and smooth travel along the rack tracks. What it does:

• Holds and organizes cups, glasses, small bowls and utensils on the dishwasher's top level
• Slides on the upper track and rollers to allow easy loading and unloading
• Replaces a cracked, bent or missing upper rack that causes tipping or poor cleaning coverage
• Helps keep items spaced for better water and detergent access

What's included: One upper rack. Install notes:

• Remove both racks or the lower rack as needed to access and install the upper rack
• Align the rack rollers with the upper track and slide fully into place until it moves smoothly
• Inspect rollers and track for damage; replace worn rollers if needed to restore proper travel
• Allow the dishwasher to cool before handling parts; watch for sharp edges while installing