Pdt525ssj0ss Parts

The Third Rack Tray is an OEM part for GE dishwashers. It provides an additional level of loading space for smaller dishes and utensils above the lower racks. 

Causes of a bad third rack tray can include deformations from overloading or use of improper loading patterns. Repeated impact from loading or unloading can also cause damage over time. 

Symptoms of a bad third rack tray include:

• Difficulty sliding racks in/out or level rack operation
• Warping, bending, or blocking the functionality of upper spray arms  
• Dishes not receiving adequate wash coverage due to spacing issues
• Rattling noises or loose movement during wash cycles

This OEM GE part is compatible with Hotpoint, RCA, Asko, and some Kenmore models. 

This replacement vent restores proper air flow for non-fan appliance models, helping exhaust heat and cooking odors while protecting internal components from debris. A direct-fit OEM-style vent for units that do not use a powered blower. What it does:

• Channels exhaust air and heat away from the appliance to maintain safe operating temperatures
• Helps prevent buildup of debris and grease in the vent opening
• Can reduce intermittent overheating and cooking odors caused by a damaged or missing vent
• Restores proper fit and appearance at the appliance vent outlet

• One replacement vent

• Disconnect power to the appliance before beginning any service
• Access may require removing the lower kick panel or outer cover
• Use basic hand tools; align clips or screw holes and avoid forcing the part into place

This bracket support hinge helps secure and guide the appliance hinge assembly, restoring proper door alignment and reliable movement. It replaces a worn or damaged hinge support to improve fit and operation. What it does:

• Supports the hinge assembly to maintain correct door alignment
• Reduces door sag, binding, or uneven closing caused by a damaged bracket
• Restores smooth hinge movement and helps prevent further wear to hinge components
• Commonly used when the door feels loose or the hinge appears bent or broken

• One bracket support hinge

• Turn off and unplug the appliance before starting any repair
• Remove surrounding panels or trim as needed to access the hinge per your model's service instructions
• Use appropriate tools and keep fasteners organized for reassembly
• Inspect and replace additional components as needed

This leak sensor mounts in the appliance's drain/drip pan to detect unwanted water and alert the control system, helping prevent overflow and water damage. It's a direct-fit replacement designed to restore pan leak detection. What it does:

• Detects water accumulation in the pan and signals the appliance control to respond
• Helps identify leaks that cause pooling under the appliance
• Can stop or trigger diagnostics before water reaches floors or cabinetry
• Compatible with the original pan wiring and connector layout

• Disconnect power to the appliance before servicing to avoid shock or damage
• Locate and access the pan area; handle the sensor and wiring gently
• Ensure proper connector seating and secure routing so the sensor contacts the pan surface
• Test the sensor and appliance after installation

This bottle blaster is a dishwasher spray nozzle that helps direct water into narrow or tall items for better rinsing and cleaning. It replaces a worn or broken nozzle to restore targeted spray performance. What it does:

• Directs pressurized wash water into bottles, thermoses and tall glassware for improved rinse coverage
• Helps reduce trapped food and residue in narrow openings by channeling spray where the regular spray arm may miss
• Commonly replaced when cracked, clogged, or when spray pattern is weak or uneven
• Works as a single-point spray fitting within the dishwasher wash system

• One bottle blaster spray nozzle

• Disconnect power and water supply before accessing dishwasher interior
• Remove the top rack or required access panels per your model to reach mounting area
• Inspect surrounding spray arm and seals; replace any damaged clips or O-rings as needed
• Reassemble components securely and run a short cycle to check for leaks and proper spray pattern

This Fan Vent Assembly is an OEM part for GE dishwashers. It plays a critical role in the dishwasher's drying system by facilitating the removal of moist air from the interior. This assembly typically includes the fan and associated components necessary for venting, helping to improve the drying efficiency and preventing excessive moisture buildup inside the dishwasher. 

A malfunctioning vent assembly can lead to poor drying performance and potential moisture-related problems within the dishwasher.

Symptoms of a faulty Fan Vent Assembly include:

• Dishes remaining damp or not drying properly after cycles.
• Noticeable decrease in the efficiency of the drying process.
• The fan making unusual noises or not operating as expected.
• Moisture buildup or condensation within the dishwasher.
• Unusual odors indicate poor ventilation.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

A replacement active diverter assembly kit that restores proper water routing in the appliance's dispenser system, helping the unit send water to the correct compartment when dispensing cycles run. What it does:

• Redirects water flow between dispenser outlets so detergent and fabric softener reach the drum or wash chamber at the correct time
• Stops cross-flow between dispenser compartments to improve dispensing accuracy
• Commonly used when the dispenser fails to release liquid or dispenses at the wrong time
• Helps resolve symptoms like incomplete dispensing, leftover detergent, or incorrect dispensing sequence

• Disconnect power and turn off water supply before starting any work
• Basic hand tools typically required; follow the appliance service manual for disassembly steps
• Inspect surrounding seals and hoses for wear when replacing the diverter

This vent (dark grey) replaces a damaged or faded exterior vent cover on compatible GE appliances, helping restore appearance and maintain proper airflow. Use it to address visible damage or improve a loose or rattling vent. What it does:

• Covers and protects an appliance vent opening while allowing airflow through the cabinet or housing.
• Helps prevent drafts and keeps debris, lint, and small pests from entering the appliance interior.
• Stops rattling or vibration caused by a cracked or loose vent cover.
• Restores the original look by replacing a faded, cracked, or broken vent piece.

• Disconnect power (and gas, if applicable) before service and work on a cool, unplugged appliance.
• Remove trim or access panels as needed; keep screws and parts organized for reassembly.
• Check fit and orientation before final fastening to ensure proper airflow and sealing.

This rail and end cap assembly replaces a worn or broken rack rail so the appliance rack glides smoothly and stays secured. It restores proper support and reduces catching, slipping, or noisy movement during use. What it does:

• Supports the appliance rack and provides a smooth sliding track.
• Replaces damaged or cracked rails and end caps that cause the rack to catch or bind.
• Helps prevent the rack from slipping off the track or dropping when extended.
• Reduces grinding, scraping, or other abnormal noises tied to worn rail components.

• Turn off power to the appliance (unplug or shut off the breaker) before starting.
• Remove the rack and align the rail with the track; snap or slide the end cap into place per the appliance's service instructions.
• Use basic hand tools if needed; avoid excessive force to prevent breakage.

8-18 hi/lo 5/8

Size: 8-32 t. Includes 12 screws.

This rubber grommet provides a protective seal where hoses, wires or components pass through openings, helping prevent chafing and moisture intrusion. Use it to restore a tight fit and reduce wear at the penetration point. What it does:

• Seals and cushions openings to help prevent water leaks and air gaps.
• Protects wiring and hoses from rubbing on sharp metal edges that can cause wear or shorts.
• Reduces vibration and rattling by holding parts securely in place.
• Common symptoms of failure: visible cracking, missing or torn grommet, water dripping near the opening, or rubbing noises.

• Disconnect power to the appliance and turn off water supply before beginning any repair.
• Remove the access panel or boot as needed to reach the opening; press the grommet into the hole until fully seated.
• Inspect surrounding seals, hoses and wiring; replace any damaged components to prevent repeat issues.

This SCR 8-18 silicon-controlled rectifier replaces the control semiconductor that switches and regulates power to heating or motor circuits in compatible appliances, restoring proper power delivery and control. It's a direct-fit electrical replacement part. What it does

• Acts as a switching device on control boards to allow or block current flow when signaled.
• Regulates power delivered to heating elements or motor circuits to enable proper operation.
• Commonly linked to symptoms like no heat or intermittent heating, motors that won't start, or erratic control-board behavior.
• Helps restore reliable on/off control when a failed SCR is causing open or shorted conditions.

• One SCR 8-18 silicon-controlled rectifier (WD02X10160).

• Always disconnect power before servicing the appliance to avoid shock.
• Handle the part carefully; avoid touching leads and use anti-static precautions if available.
• Inspect surrounding connectors and wiring for damage; replace any corroded terminals.

This stainless steel door handle replaces a worn or damaged original and restores a clean, sturdy grip for opening and closing the appliance. Durable finish matches stainless surfaces and renews the appliance's appearance and function. What it does:

• Provides a secure grip for opening and closing the appliance door
• Restores a damaged, loose, or bent factory handle to original fit and feel
• Matches stainless finishes to maintain a uniform exterior look
• Helps prevent further damage from continued use of a compromised handle

• One stainless steel replacement door handle

• Disconnect power or unplug the appliance before beginning any repair
• Handle typically installs with screws from the interior; access may require removing an inner door panel or trim
• Retain and reuse any original mounting hardware if included with the replacement; do not overtighten fasteners

A fixed mounting bracket that secures and stabilizes a component or panel in place, helping prevent movement and vibration for reliable appliance operation. Simple, durable replacement for worn or damaged brackets. What it does:

• Holds a panel, trim, or assembly securely to the appliance frame
• Keeps parts aligned to prevent rubbing, rattling, or misfit
• Restores proper support when an original bracket is bent, cracked, or broken
• Helps reduce noise caused by loose or unstable components

• Disconnect power (and water if applicable) before starting work
• Use the factory fasteners or equivalent-size screws to secure the bracket
• Inspect mating surfaces and hardware for damage; replace any stripped screws

This vent conduit assembly routes exhaust from the dryer to the home vent, restoring proper airflow and helping the appliance vent safely. It replaces a damaged, crushed, or disconnected dryer vent channel to improve drying performance and reduce lint buildup. What it does:

• Channels dryer exhaust from the appliance to the wall vent
• Prevents restricted airflow caused by crushed or separated vent tubing
• Helps reduce long dry times and overheating symptoms
• Lowers risk of lint buildup and related odors near the dryer

• Disconnect power (and gas supply for gas dryers) before beginning service
• Verify correct alignment and secure with appropriate clamps or fasteners
• Inspect adjacent venting and clean lint from vent path while replacing