Pdt525ssj0ss Parts

This upper rack fold-down tine assembly replaces worn or rusted tines on your dishwasher's top rack. It restores secure, adjustable support so cups, bowls, and small items stay upright and protected during the wash.

• Provides adjustable rows of coated tines on the upper rack to hold items in place
• Folds flat to make room for larger dishes when needed
• Helps prevent tipping, chipping, and poor cleaning from items falling over
• Common signs: broken or missing tines, peeling coating and rust, items not staying upright on the upper rack

• Disconnect power to the dishwasher before servicing
• Pull the upper rack forward; release end stops to remove the rack if needed
• Unclip and remove the old fold-down tine assembly; align and snap the new assembly onto the rack wires in the same position
• Verify the tines fold and lock properly before running a cycle

This upper rack conversion replaces the original tiered-style upper rack with a flat design. It restores a level loading surface and updated rack layout for easier placement of cups, bowls, and stemware on the upper level.

• Replaces the tiered upper rack with a flat, level rack configuration
• Helps when items tip or won't sit level on the upper rack
• Addresses damage such as bent frame, broken/missing tines, or rusted areas
• Restores proper alignment and smooth rolling when the old rack is warped

• Disconnect power to the dishwasher before starting.
• Fully extend the upper rack, remove the rail end caps/stops, and lift the old rack off the rails.
• Transfer any reusable accessories (cup shelves, clips) from the old rack to the new rack as needed.
• Set the new rack onto the rails, reinstall end caps, and verify smooth travel and adequate clearance.

Left-hand door trim that restores the finished edge and appearance of the refrigerator door. Replaces cracked, dented, or missing trim to improve the door's cosmetic look and help maintain a proper seal area. What it does:

• Replaces the left-hand exterior door trim piece to restore the door's finished appearance and cover exposed edges.
• Helps protect the door edge from chips, scratches, and impact damage that cause visible wear.
• Addresses symptoms like cracked, warped, loose, or missing trim that create rough edges or an unfinished look.

• May require basic hand tools and removal of adjacent trim, gasket, or fasteners—follow the OEM service instructions for your model.
• If repair work exposes wiring, switches, or controls, disconnect power before starting.
• Handle trim edges and clips carefully to avoid damage; keep original fasteners and clips for reuse when possible.

This turbidity sensor measures how cloudy the dishwasher wash water is so the machine can adjust cycle length and cleaning intensity for better results. It replaces a failed or intermittent sensor to restore proper soil detection. What it does:

• Detects cloudiness/soil level in dishwasher wash water to inform cycle controls
• Helps the washer lengthen or shorten cycles based on detected soil levels
• Commonly replaced when the dishwasher runs unusually long, cleans poorly, or loses soil-sensing function
• Works as the electrical sensor module that sends signals to the control board

• One turbidity sensor assembly

• Disconnect power and water supply before accessing internal components
• Handle the sensor carefully; avoid touching the sensing surface and wiring pins
• Ensure connector is fully seated and any mounting grommets or clips are returned to their original position

This lower dishwasher rack assembly replaces a worn or damaged lower rack to restore stable support for plates, bowls and cookware. It keeps dishes organized and positioned for effective cleaning and drying. What it does:

• Provides a sturdy base for stacking plates, bowls and larger cookware in the lower dishwasher area
• Maintains proper spacing and alignment so spray arms and detergent reach dishes
• Replaces bent, rusted or broken rack sections that can cause dishes to shift or block spray
• Helps stop items from tipping or nesting during the wash cycle

• Remove power to the dishwasher before beginning any service
• Typically installs by sliding into the lower track; may require removing the old rack and any roll pins or clips
• Basic hand tools may be needed; for model-specific guidance
• If rollers, clips or tines must be transferred, those parts are present and undamaged before installation

This front tub spacer cushions and positions the washer tub to reduce vibration and keep the inner and outer tubs properly aligned during operation. It helps maintain smooth spin cycles and prevents metal-to-metal contact. What it does:

• Centers and supports the front of the washer tub to maintain proper drum alignment
• Absorbs movement to reduce vibration and noise during spin
• Prevents rubbing or contact between the tub and cabinet components
• Can be associated with symptoms like excessive vibration, rubbing sounds, or off-center spins

• Designed for direct replacement; inspect surrounding seals and mounts during service
• Use basic hand tools; follow the washer's service manual for safe disassembly and reassembly
• Disconnect power and water supply before beginning any repair

This third-rack cutlery tray fits in the dishwasher's upper-most rack to hold forks, knives and spoons separately for better cleaning and organization. It keeps small items secure so they don't fall into the lower rack or block spray. What it does:

• Provides a dedicated tray for flatware and small utensils to improve wash access and drying
• Prevents cutlery from nesting or falling through the racks during a cycle
• Helps keep the lower rack clear so large items get a better wash
• Restores proper fit and function when the original tray is cracked, warped, or missing

• No tools or electrical work required; tray installs into the upper rack slots—refer to your owner's manual for exact placement
• Inspect rack runners and clips for damage before installing
• Handle sharp utensils carefully when loading and servicing the tray
• If the dishwasher was recently used, allow it to cool before working inside

This rubber sump gasket seals the appliance sump to prevent water leaks and maintain proper draining. It restores a tight, dependable seal where the sump meets the tub or pump housing. What it does:

• Forms a watertight seal at the sump to stop leaks under the appliance
• Helps maintain correct drain flow by sealing the sump-to-pump/tub junction
• Commonly replaced when you see puddling, visible gasket damage, or persistent leaking
• Compatible when the original gasket is cracked, flattened, or deformed

• One sump gasket

• Disconnect power and turn off the water supply before starting any repair
• Inspect mating surfaces and clean away debris or residue before installing the new gasket
• Use basic hand tools; handle the gasket gently to avoid stretching or tearing
• Replace only with the matching part number for a proper fit and seal

This detergent module cover is the replacement lid for a washing machine's detergent/dispenser assembly, restoring a secure seal and proper dispenser function. It helps keep detergent contained and prevents leaks and cosmetic damage. What it does:

• Covers the detergent module so the dispenser closes properly during the wash cycle
• Helps prevent detergent or fabric softener from spilling into the tub or cabinet
• Restores a finished appearance when the original cover is cracked, warped, or missing
• Supports proper dispensing so detergent is delivered at the correct time in the cycle

• One detergent module cover

• Disconnect power (and water if applicable) before beginning work
• Access may require opening the washer lid/top or control console depending on model
• Typically secures with snaps or small screws; align tabs and engage gently to avoid breakage

This heat shield protects the appliance cabinet and nearby components from excessive heat, helping prevent heat damage and maintaining safe operation. It's a direct-replacement metal shield used where high temperatures are present. What it does:

• Deflects and disperses heat away from cabinet panels and internal parts
• Helps prevent scorched paint, melted components, and heat-related wear
• Supports safe oven/dryer operation by controlling heat flow around openings
• Often replaced when shield is warped, rusted, or shows burn marks

• One heat shield

• Disconnect power (and gas if applicable) before beginning any repair
• Inspect surrounding fasteners and insulation; replace any damaged hardware or insulation
• Secure shield with the correct screws/clips; do not force or bend the shield to fit

This replacement rack handle restores a secure grip on the dishwasher's upper rack so you can slide the rack smoothly and load dishes safely. It replaces a cracked, broken, or missing rack pull and helps keep the rack aligned while in use. What it does:

• Provides a sturdy handhold to pull the upper dishwasher rack in and out
• Secures to the rack frame so the rack slides smoothly on its rollers
• Replaces damaged, cracked, loose, or missing handles that make loading difficult
• Helps prevent further wear from using makeshift grips or forceful pulling

• One replacement rack handle

• Disconnect power to the appliance before attempting any repair to avoid electrical hazards
• Remove the upper rack from the dishwasher to access mounting points more easily
• Reinstall by snapping or fastening the handle into the existing rack mounting location; retain all original clips or hardware unless replacements are provided

This toe kick panel replaces a damaged or missing lower-front trim to restore a clean look and protect the appliance base from dust and debris. Fits the lower front area and matches the appliance's black finish. What it does:

• Covers the appliance's lower access opening and conceals internal components behind the kick area
• Protects the base from dirt, debris and accidental scuffs
• Restores appearance when the original panel is cracked, warped or discolored
• Helps keep pets and small objects from entering under the appliance

• Remove power and pull the appliance away from the cabinet as needed before starting
• Remove existing kick panel fasteners or clips; panel may secure with screws, tabs or clips depending on model
• Align replacement panel and secure with the original fasteners or manufacturer-recommended hardware

This replacement silverware basket holds forks, knives and spoons securely during dishwasher cycles to keep utensils organized and prevent items from falling through the rack. Restores proper utensil containment so dishes come out cleaner and easier to unload. What it does:

• Provides dedicated compartments to keep silverware upright and separated for better cleaning
• Prevents small items from shifting or falling to the bottom of the dishwasher during cycles
• Replaces cracked, broken or missing baskets that no longer secure utensils
• Helps reduce potential damage to silverware caused by loose movement during washing

• One silverware basket

• Inspect the dishwasher rack and confirm the basket orientation before seating the replacement
• Remove any dishes and ensure the dishwasher is off and cool before replacing the basket
• No specialty tools typically required; slide or seat the basket into the rack until secure
• Verify fit and stability by closing the rack and running a short, empty rinse if desired