Pdt845sblts Parts

This coated upper FDT assembly is a direct replacement for the appliance's upper FDT structure, restoring worn or damaged upper components for reliable operation. It helps maintain alignment and reduces wear-related issues. What it does:

• Replaces the appliance's upper FDT assembly to restore proper fit and support.
• Provides the coated surface that helps protect mating parts from wear and abrasion.
• Helps correct symptoms such as rubbing or scraping noises, misalignment of the upper housing, and visible wear or damage.
• Restores the intended clearance and contact surfaces for smoother operation.

• One coated upper FDT assembly.

• Disconnect power to the appliance before starting any repair.
• Handle the coated surfaces with care to avoid scratching or damaging the finish.
• Retain and reuse existing mounting hardware unless replacement hardware is explicitly required.

The Pan Leak is an OEM part for GE dishwashers. It is a machined pan located at the bottom of the tub that collects any residual water after a wash cycle finishes. 

Symptoms of a faulty leak pan include: 

• Puddles or residual water remaining in the bottom of the tub after a cycle
• Water not properly draining from the bottom tub area
• Potential for water damage issues if left unaddressed

Causes can be cracks in the molded pan housing, mineral deposits clogging the drainage channels, or warping preventing a proper seal.

Replacing with this authentic GE OEM part restores the tub's intended draining and drying functionality. It is compatible with Hotpoint, RCA, and Kenmore models as well to help prevent future water problems underneath the dishwasher.

The Diverter Assembly is an OEM part for GE dishwashers. It directs water flow during the dishwashing cycle, ensuring water distribution and pressure for efficient cleaning. It diverts water to the appropriate spray arms, allowing for thorough coverage of dishes and utensils.

A bad Diverter Assembly can result in issues such as weak spray, reduced cleaning power, or improper water distribution. Causes of a bad diverter assembly can include wear and tear over time, blockage or debris interfering with the diverter's movement, or damage to the assembly due to mishandling.

Symptoms of a bad Diverter Assembly include:

• Insufficient water pressure or weak spray from the spray arms
• Inadequate cleaning performance with residue or food particles remaining on dishes
• Uneven water distribution, leading to uneven cleaning results
• Unusual noises during the dishwashing cycle, such as grinding or rattling sounds

Replace your faulty or damaged Diverter Assembly with this genuine OEM GE part. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This control board clip secures the dishwasher's electronic control board to its mounting location, keeping it properly seated during operation. Replacing a damaged or missing clip helps prevent vibration, movement, and wire-connector strain.

• Holds the electronic control board firmly in its designated mount or housing
• Helps prevent board movement, rattling, and connector stress from vibration
• Replace if the clip is cracked, deformed, or missing
• Symptoms include a loose control assembly, rattling noises, or a board that won't stay seated

• Disconnect power at the breaker before servicing
• Access the control area; support the board when removing/installing the clip
• Handle the control board by the edges and observe ESD precautions
• Ensure the new clip is fully seated and the board is secure before reassembly

This blaster silverware assembly is the dishwasher spray component that directs wash water to the silverware area for better cleaning and rinsing. Replaces a cracked, clogged, or missing blaster to restore targeted spray action. What it does

• Directs high-pressure wash water to the silverware basket for improved cleaning of forks, knives, and spoons
• Replaces a broken, clogged, or leaking blaster that can cause poor silverware cleaning
• Restores proper spray coverage when the original assembly is worn or damaged
• Works with the dishwasher's lower spray system to help remove stuck-on food from utensils

• One blaster silverware assembly

• Disconnect power to the appliance before beginning any work
• Remove the lower rack to access the old assembly; installation typically snaps or screws into the lower spray/silverware area
• Inspect and clear nearby spray arm openings and filter screen of debris while replaced

This flexible silverware bellow seals and guides water flow around the dishwasher silverware basket, helping maintain proper spray circulation and keeping utensils contained for more consistent cleaning results. What it does:

• Replaces a torn or worn bellow that can allow utensils to block spray or shift during a cycle
• Helps direct wash water into the silverware area for more even cleaning
• Prevents small items from falling through gaps beneath the basket
• Reduces the chance of debris collecting where the basket meets the tub

• Disconnect power to the appliance before attempting any service.
• Typically snaps or slides into place; remove the silverware basket for access.
• Inspect surrounding gaskets and the basket for damage; replace if worn.

This button and graphics assembly restores the labeled control buttons and front-panel graphics so your appliance's controls are visible and responsive. Replaces worn or damaged button cover and printed legends for easier operation. What it does:

• Replaces the physical control buttons and printed graphics on the front control panel.
• Restores clear button legends so settings and functions are readable.
• Helps resolve non-responsive or damaged button caps and worn graphics.
• Useful when buttons are cracked, faded, or peeling.

• High-level replacement only; disconnect power before servicing.
• Access may require removal of the console or control housing.
• Handle printed graphics carefully to avoid scratching; use non-abrasive tools.
• If connectors or switches are damaged, inspect and replace separately—this assembly typically replaces only the button/graphic panel.

This right-side door trim is a factory-style replacement that restores the finished edge and appearance of the appliance door. It covers the door edge and trim mounting area for a clean, factory look. What it does

• Replaces cracked, chipped or worn right-side door trim to restore appearance
• Covers and protects the door edge and trim fasteners from dirt and damage
• Helps maintain the door's finished look after impacts or wear
• Fits into existing trim mounting points for a direct replacement

• High-level replacement only; follow for disassembly steps
• Remove any contents from the door and move shelves as needed for clearance
• Use proper tools to remove fasteners or trim clips; avoid forcing the trim to prevent damage

This top attachment strip secures the appliance's top panel and provides the mounting point for the door strike, restoring a stable, properly aligned front. It prevents panel movement and reduces rattles for a snug fit and reliable door engagement. What it does:

• Secures the top/front panel to the cabinet to maintain alignment and fit
• Serves as the mounting point for the door strike or latch components
• Helps eliminate rattling, vibration, and gaps at the top of the door area
• Restores reliable door engagement and prevents the strike from shifting

• Disconnect power to the appliance before beginning any repair
• Remove the top panel or access screws to reach the attachment strip; a screwdriver set is typically required
• Handle mounting tabs and edges carefully to avoid bending or damage
• Verify alignment of the door strike and test door closure after installation

This replacement screw fastens and secures appliance components where a 1/4-28 threaded flange screw with an internal hex washer head is required. It restores proper fit and helps prevent movement or rattling of panels and assemblies. What it does:

• Secures panels, brackets and components that use a 1/4-28 threaded flange screw
• Internal hex washer head allows a compact, low-profile drive for tight spaces
• Helps stop looseness, vibration noise, and misalignment when the original fastener is missing or worn
• Matches OEM fit and fastening form for reliable reassembly

• Disconnect power and follow all appliance safety procedures before servicing
• Use the correct hex driver/socket to avoid stripping the head
• Tighten to snug fit—do not overtighten to avoid damaging threads or mating parts
• Replace with identical part number to ensure proper fit and function

This left-side door trim piece restores the exterior appearance and proper fit of a damaged or worn appliance door. It replaces cracked, chipped, or loose trim to help the door close and sit correctly in the frame. What it does:

• Covers and protects the left edge of the door while providing a finished appearance
• Replaces cracked, broken, or cosmetically damaged trim
• Helps maintain correct alignment of the door edge and attachment points
• Secures to the door with factory mounting tabs or screws
• Useful when left-side trim has snapped, warped, or come loose

• One left side door trim

• Disconnect power and/or fuel supply before beginning any repair
• Use appropriate hand tools; support the door to prevent dropping or damage
• Inspect mounting tabs and nearby components; replace any broken fasteners
• Follow the appliance service manual for disassembly and torque/spec guidance

This housing bottom is the lower cabinet section that supports internal dryer components and helps channel airflow. It restores structural support and proper airflow path for safe, efficient dryer operation. What it does

• Provides a stable mounting surface for the blower, motor base, and other lower-chassis components
• Helps direct airflow from the drum to the blower and vent, supporting proper drying performance
• Replaces cracked or damaged lower housing that can cause vibration, rattling, or rubbing noises
• Prevents gaps that could allow lint buildup near motor/blower areas and reduce airflow

• One housing bottom

• Recommended for technicians or experienced DIYers; unplug the appliance and disconnect power before starting
• Remove the dryer cabinet and follow OEM disassembly steps to avoid damaging wiring, seals, or nearby components
• Inspect adjacent parts (blower wheel, mounts, seals) and replace any worn items while the cabinet is open
• Test appliance after reassembly to ensure proper fit, airflow, and that any noises or vibration are resolved

This lower spray arm assembly circulates wash water across the bottom rack to help remove stuck-on food and debris for cleaner dishes. Replaces a cracked, clogged or broken lower spray arm to restore proper spray coverage. What it does:

• Rotates and distributes pressurized wash water to the lower rack for effective cleaning
• Clears food and detergent residue from the lower spray path when functioning correctly
• Stops wobbling, cracking, or uneven spray caused by a damaged or broken arm
• Helps prevent poor wash performance or leftover food on bottom-rack items

• One lower spray arm assembly (single complete lower arm)

• Disconnect power to the appliance and shut off the water supply before beginning service
• Remove the lower rack to access and replace the spray arm
• Inspect spray arm mounting and seals for damage and replace any worn fasteners or gaskets as needed

This control box bottom is the lower housing that protects and supports the appliance's control electronics, helping keep wiring and components secure from debris and moisture. Fits into the control assembly to restore proper enclosure and support. What it does:

• Provides a protective lower enclosure for the control board and wiring harness
• Helps keep dust, lint and moisture away from sensitive electronics
• Secures the control board and related connectors in their correct position
• Prevents rattling or movement that can cause loose connections or noise

• One control box bottom (base cover) as pictured

• Disconnect power before servicing to avoid shock or component damage
• Handle electronics carefully and avoid touching circuit contacts
• Installation typically requires basic hand tools and removal of the control housing