Pfw950spt3ds Parts

This rear damper bracket secures the refrigerator damper assembly to the cabinet, keeping the air-flow control components aligned for proper operation. Replacing a broken bracket restores stable damper positioning and helps reduce noise and airflow issues. What it does:

• Holds the damper assembly in place at the back of the cabinet so the damper can open and close correctly
• Prevents the damper from shifting or rattling, which can cause unusual noises
• Helps maintain consistent airflow from the freezer/fridge duct by keeping the damper aligned
• Useful when the original bracket is cracked, broken, or missing mounting points

• One rear damper bracket

• Disconnect power to the appliance before starting any repair
• Remove any interior shelving or rear access panels necessary to reach the damper area
• Keep fasteners and any small clips; transfer them only if compatible and explicitly required
• Inspect the damper and actuator for wear before reassembly

A small machine screw used to fasten appliance components where an M5 x 16 metric screw is required. Durable metal construction provides a secure fit for panels, brackets and assemblies that use a metric M5 thread. What it does

• Secures panels, brackets or small assemblies that accept an M5 x 16 machine screw
• Replaces stripped or missing fasteners to restore proper fit and alignment
• Helps prevent vibration and rattling when the correct screw is used
• Commonly used in appliances with metric hardware fastenings

• One M5 x 16 screw

• Verify size (M5 x 16) and thread type before installing to ensure proper fit
• Use the correct driver and moderate torque to avoid stripping the head or threads
• Disconnect power and follow appliance safety guidelines before servicing
• If screw threads are damaged, replace with the correct-size fastener rather than reusing

This rear tub is the outer wash tub that holds the wash basket and contains water during cycles, restoring the washer's ability to hold water and support the drum assembly. Replaces a cracked or damaged outer tub. What it does:

• Provides the water-tight outer housing for the wash basket so the machine can fill and agitate properly
• Supports the inner drum and bearings to keep the tub rotating smoothly
• Stops leaks caused by cracks, corrosion, or damage to the outer tub
• Helps reduce noise and wobble when the outer tub and mounts are functioning correctly

• Disconnect power and water supply before beginning any repair
• This is a heavy, bulky component — get a second person or use proper lifting gear
• Requires removing the cabinet, control console, and drive components; follow OEM service instructions
• Inspect seals, gaskets, bearings, and mounting hardware while the washer is disassembled; replace as needed

This shipping bolt hole cover plugs the opening left by a shipping or transit bolt, protecting the appliance interior and restoring a finished look. It helps keep out dust and debris while covering an unused fastener hole. What it does:

• Covers the hole left after removing a shipping or transit bolt to improve appearance
• Helps prevent dust, lint and small debris from entering the cavity
• Reduces drafts and potential moisture entry at the exposed opening
• Keeps the area safe from accidental contact with sharp edges around the hole

• One shipping bolt hole cover

• Install by pressing the cover into the hole until it snaps or seats flush; no special tools usually required
• Ensure the shipping bolt and any fasteners are fully removed before installing the cover
• Disconnect power or follow appliance safety guidelines when accessing internal panels

Replacement drive belt that turns the dryer drum to tumble clothes so loads dry evenly. Restores normal tumbling by transferring motor power to the drum when the original belt is worn, stretched, or broken. What it does

• Transfers motor torque to the drum so the dryer tumbles and circulates air through the load.
• Commonly needed when the drum won't turn, tumbles intermittently, or you hear a slipping or rubbing noise.
• Works with the dryer's idler and motor pulley to maintain proper drum rotation.
• Prevents further wear on the motor and drum components when replaced at first signs of damage.

• Disconnect power before starting; for gas dryers, also shut off the gas supply and allow components to cool.
• Inspect idler pulley, motor shaft, and drum rollers for wear when replacing the belt and replace any worn parts.
• Route the belt around the drum and pulleys per the machine's service diagram; ensure proper tension and alignment before testing.

This door lock harness cover protects and secures the door lock wiring and connector, helping prevent chafing and accidental disconnection so the door latch assembly operates reliably. What it does

• Covers and protects the door lock harness from abrasion and contact with moving parts
• Keeps the lock connector and wires bundled and secured to the door/latch area
• Helps prevent intermittent door-lock electrical faults caused by loose or pinched wiring
• Appropriate when harness insulation is exposed, rubbing, or the connector is loose

• One door lock harness cover

• Disconnect power before beginning any repair to avoid shock or injury
• Access requires removing the door or control panel depending on model; handle the harness and connector gently
• Use original mounting hardware or clips; replace damaged fasteners as needed

This user interface board is the electronic control panel that lets you operate the washer and communicates button presses to the main control. It restores responsive controls and proper display behavior so you can select cycles and options reliably. What it does:

• Reads and transmits button and touch inputs to the washer's main control board
• Powers and controls the front-panel display and status lights
• Helps prevent incorrect cycle selection or unresponsive controls
• Common symptom fixes: unresponsive buttons, blank or erratic display, or incorrect cycle feedback

• Disconnect power to the appliance before starting any repair
• Handle the board carefully and avoid touching components; use ESD protection if possible
• Remove the control panel trim and disconnect ribbon and wiring harnesses to access the board

This spray nozzle directs wash water toward glassware to help improve rinsing and reduce spotting. It replaces a worn or broken nozzle to restore the dishwasher's intended spray pattern for delicate items. What it does:

• Directs a focused water spray toward glasses and stemware for better rinsing.
• Helps reduce water flow loss from a cracked or clogged nozzle.
• Commonly replaced when glassware is not being cleaned or rinsed properly.
• Compatible with the dishwasher's spray arm assembly where the nozzle mounts.

• One spray nozzle to glass (single nozzle as shown).

• Disconnect power and water supply before servicing the dishwasher.
• Access may require removing the upper spray arm or tub components; handle plastic parts gently to avoid damage.
• Clean surrounding fittings and check for debris before installing the new nozzle.

This fixed-line clip secures a refrigerator's water or tubing line to the cabinet, keeping the line routed and held firmly to reduce vibration and wear. It's a simple replacement that restores proper line routing and helps prevent contact-related damage. What it does:

• Holds water tubing or small lines against the cabinet or frame to prevent rubbing and chafing
• Keeps lines routed securely to reduce vibration noise or rattling
• Helps prevent kinks or dislodging that can lead to leaks or flow issues
• Replaces a broken or missing clip to restore factory routing and fit

• One fixed-line clip

• Disconnect power and shut off the water supply before working on water lines
• Access may require removing a lower kickplate or interior panel; keep fasteners for reassembly
• Clip typically snaps into a slot or over an edge; no special tools required, but pliers or a flat screwdriver can help
• Inspect routed tubing for wear; replace or re-seat tubing as needed when installing the clip